Search results for: 'support'

The Radiodetection RD8200 with Tx-10 is a professional cable and pipe locating kit for utility detection. The RD8200 locator operates with the Tx-10 transmitter to support active locating using direct connection and induction methods. Supplied with essential accessories for field use.

Wöhler 7301 Camera Viper is a 98 ft inspection camera push rod with 0.26 in diameter, digital meter counter, belt holder, and stand for compatible Wöhler VIS inspection camera configurations.

Allen-Bradley 20AD011A0AYNANNN PowerFlex 70 drive delivers reliable 480V, 7.5 HP motor control with enhanced performance, braking capability, and panel-mount design.

The SLX-8MG is a managed industrial Ethernet switch designed for use in demanding industrial environments. It features eight Gigabit Ethernet ports, which can be configured for a variety of network topologies and applications. The switch is rugged and designed to withstand harsh operating conditions, including extreme temperatures, humidity, and vibration. It also supports advanced features such as VLANs, QoS, and IGMP snooping, making it ideal for use in industrial automation, transportation, and other mission-critical applications. The SLX-8MG is designed to be easy to install and configure, and it can be managed locally or remotely using a web-based interface or command line interface.

Endress+Hauser TG051F34 plug-in LCD display for iTEMP transmitters, providing local measurement readout, diagnostics, and easy on-site monitoring.

HARTING 09150006206 silver-plated Han D female crimp contact with AWG 14 capability delivers reliable 10 A performance and low ≤3 mΩ resistance for industrial connector applications.

AEMC 2135.82 Calibration Loop for Model 6474 supports ground resistance tester calibration and verification workflows for compatible CA 6474 systems.

Wöhler 7979 Star Holder supports chimney and exhaust-pipe cleaning workflows with a 1 in star holder format and M12 thread connection.

he HYTORC LST-3000 Lithium Series II is a 36V battery-powered electric torque tool rated up to 3,000 ft-lb. It features a brushless DC motor, TorcSense™ direct torque measurement, and a high-resolution rear display for controlled tightening and loosening of industrial fasteners using conventional reaction-arm configurations.

Fluke DTX-1800 CableAnalyzer™: Ultra-fast 12-sec Cat 6 tests, 900MHz capability, fiber/copper support, 12-hour battery. Boost efficiency & accuracy!

Olympus OmniScan X3 64:128 phased array and TFM flaw detector with 64 pulsers, 128 receivers, full 64 element aperture, up to four TFM groups, live TFM envelope, AIM visualization, IP65 enclosure, and 10.6 in touchscreen.

Certified pre-owned Sonatest T1-24.4T0D 1 MHz 24.4 mm twin compression membrane transducer with top exit Microdot connector. Delivers wide-area coverage and deep penetration for flaw detection and corrosion mapping in tough industrial environments.

Achieve perfect antenna alignment every time with the VIAVI 3Z Telecom RF Aligner RFA1000-fast, precise, and GPS-powered! Ready to boost your network? Get yours today!

Laser output is class 3A (around 3~5 milliwatt) Maximum opereration distance is 8 km Simple, versatile, and user-friendly design Rugged, compact, and splash proof copper housing Three operation modes available: "CW" (Continuous wave output), "Pulse" and "Off" modes Continuous wave output mode (CW) for steady fault illumination Pulse mode helps to locate faults under high ambient light conditions Support LC 1.25mm connectors The button switch permits easy one handed operation Handy, pocket pen design 2 AAA-size alkaline batteries provide 50 hours of continuous operation

Viavi T-BERD 2000 DWDM: Advanced fiber testing solution with built-in power meter, VFL, and 9-hour battery. Boost productivity with smart, fast, and reliable field testing.

Fluke Networks OFP-QUAD OptiFiber Pro OTDR: Maximize fiber testing efficiency with multi-wavelength support, fast results, and expert-grade precision for flawless network performance.

The Graco 104125 Filter Indicator is a mechanical red pop-up indicator used on Graco Red Alert fluid filters. It provides a visual warning when the filter element becomes clogged and requires cleaning or replacement to maintain proper system operation

The Yamatake Honeywell J-MHM10 is an industrial system interface module used in distributed control and automation environments. Manufactured in Japan, it operates on DC 5V at 1.08A with optional DC 24V at 320mA support, and is designed for integration within industrial control systems.

Fluke Networks RJ-45 network cable ensures fast, reliable device connectivity with durable construction and plug-and-play usability.

Fluke Networks ADAP-PTNX-KIT: Complete Ethernet accessory kit with adapters and Dial Tone Detective for voice, data, and video cable testing.

AEMC 5000.13 power adapter and US power cord for reliable operation of ground testers models 6470, 6471, and 6472 with dual voltage support.

INA SRMC 3-A 300 cm signal lead cable supports SRM electronic measurement system connectivity with a rugged cable assembly for precise bearing measurement setups.

Fluke 810PA AC power adapter provides reliable charging for the Fluke 810 handheld vibration tester and includes an international plug set.