Search results for: 'it's for'

Fluke CertiFiber Pro CFP-Q-ADD Quad OLTS Add-On Kit – Expand your CertiFiber Pro setup with dual Quad OLTS modules, multimode & single-mode TRC kits, adapters, and hard carry case. Enables Tier-1 fiber loss, length & polarity testing with full reference cords included.

AEMC OX 5042B Handscope is a 3-in-1 oscilloscope, multimeter, and harmonic analyzer kit with 2 isolated channels, 40MHz bandwidth, and long battery life.

Adam Equipment W Series Stainless Steel Platform Scale WL 330a: Durable washdown scale with IP68 rating, ideal for industrial environments. Built to last!

Digi-Pas DWL-200 Torpedo Digital Level delivers fast digital angle and slope measurement with 0.1° resolution, alternate zero, inverted display, self-calibration, and magnetic hands-free positioning.

Allen-Bradley 43GR-TIS10SS delivers glass fiber optic sensing connectivity for small-aperture photoelectric sensor systems, with a stainless steel conduit and M6 x 0.75 threaded TI sensing tip.

Mitsubishi TH-T25KP thermal overload relay provides 3-element overload protection with a 1.7 A heater designation, 1.4–2 A setting range, and auxiliary NO/NC contacts for industrial motor control circuits.

Wenglor UF88VCF-P24 photoelectric switch sensor supports non-contact object detection for industrial automation with DC operation, fast switching performance, and flexible sensing capability for demanding machine and control tasks.

Fisher TW82 Digital Line Tracer delivers 82.175 kHz utility locating with Normal and Lateral modes for tracing buried pipes and cables using conductive or inductive methods.

The INNO B-80 is a 16-position replacement blade designed for INNO fiber cleavers including V7, V7+, V10, V11, V12, V17, VF-15, VF-15H, and VF-78 models. Rated for up to 48,000 cleaves, the B-80 replaces the B-77 blade and supports consistent fiber cleaving in installation and maintenance environments.

Turck NI10-G18SK-RZ3X2 55MM inductive proximity sensor with 10 mm rated switching distance. Non-flush M18 threaded design with chrome-plated brass housing. Supports 20–250 VAC or 10–300 VDC operation using a 2-wire NC output. Terminal chamber connection with IP67 protection.

Phoenix Contact RAD-IN-8D is an 8-channel digital input extension module for the Radioline system. It accepts 5–30 V AC/DC signals, mounts on a 35 mm DIN rail, and connects via a bus foot connector for modular industrial automation signal acquisition.

The General Electric CR305X100E is a side-mounted auxiliary contact adder block providing one normally closed (1 NC) contact for GE 200- and 300-Line starters and contactors. It is designed for field installation onto a basic auxiliary contact block and is rated up to 600 VAC and 250 VDC.

Fluke Networks GLD3-DSX-8000QI Gold Support delivers 3-year premium maintenance with calibration, repairs, loaner units, and 24/7 expert support.

Fluke Networks GLD-OFP-Q-ADD Gold Support delivers 1-year premium maintenance with calibration, repairs, loaner service, and 24/7 expert support.

AEMC C.A 6240 digital micro-ohmmeter for precise low-resistance and contact resistance testing. 4-wire Kelvin measurement with selectable test currents up to 10A, 1 µΩ resolution, onboard memory, and DataView® software support.

Allen-Bradley 193-EPM2 is a DIN rail and panel mount adapter that enables remote mounting of compatible Bulletin 193-E solid-state overload relays, improving layout flexibility in industrial motor control panels.

Fluke FLK-FEV150/TY1 PRO EV Charging Station Analyzer delivers safe AC EVSE testing with Type 1 plug, guided workflows, and advanced TruTest reporting.

Alstom ESA-700 UV flame signal analyzer for Limelight Exacta systems, providing fast flame failure detection and reliable burner monitoring in large combustion equipment using 21.6–26V AC input power.

Metso Automation IOP351 is a relay output I/O interface module designed for Metso control systems, enabling reliable field device switching and control in industrial automation and process environments.

Toshiba VFS15-4015PL-W VF-S15 variable frequency drive delivers precise 3-phase motor speed control up to 1.5 kW. Designed for compact industrial installations requiring reliable torque control and energy efficiency.

Fluke 1775/FPC analyzer offers 8 kV transient capture, automatic power quality measurements, WiFi/BLE connectivity, and includes 1-year Premium Care protection.

Fluke FQM-SFP-M locator kit speeds multimode fiber testing with fast distance, fault, and splice detection plus live signal awareness for quick troubleshooting.

Fluke 59 MAX Infrared Thermometer: Compact, durable, and precise non-contact temperature measurement with 8:1 D:S ratio and IP40 protection.

The Fluke Networks FI-1000-KIT delivers high-resolution fiber end-face inspection with USB connectivity, universal tips, and Versiv compatibility.