Search results for: '2.5 and to its'

Fluke Networks P3218024 line cord enables reliable testing of insulated telephone wires using straight bed-of-nails clips with compatible lineman test sets.

The Thermo Scientific Niton XL3t 600 delivers fast on-site soil screening with Soils & Minerals capability, helping environmental workflows assess contaminant levels without lab-first delays.

The AEMC 6555 is a 15kV digital megohmmeter for insulation testing on motors, cables, and electrical apparatus. It supports fixed/variable voltage tests, step and ramp profiles, automatic DAR/PI/DD ratios, on-screen graphs, and USB/DataView reporting with storage for up to 80,000 points.

Fluke BP190 rechargeable NiMH battery pack delivers 7.2V power for ScopeMeter 190, 190C, and 430 Series instruments, providing reliable internal power with OEM-matched fit and capacity.

Fluke Networks FI-500CP — Replacement camera probe for the FI-500 FiberInspector Micro, delivering 200× magnification, a 5 megapixel sensor, autofocus and auto-center, and PortBright™ built-in illumination to inspect fiber end-faces in tight, low-light panels.

Unlock professional-grade aerial imaging with the Autel EVO II Pro V2! Capture stunning 6K videos and 20MP photos with a 1” CMOS sensor, adjustable aperture, and advanced obstacle avoidance. Perfect for pros in photography, surveying, and more!

The Emerson KL2101X1-BA1 CHARM I/O Card (CIOC) is a DeltaV™ Electronic Marshalling subsystem component designed for industrial automation environments. It supports hazardous area installations and operates within -40 °C to +70 °C ambient conditions per manufacturer documentation.

Schneider Electric Telemecanique LC1D09 is a 3-pole AC contactor with a 120V 50/60Hz coil, rated 9 A in AC-3 applications, with integrated auxiliary contacts.

3M Dynatel 1420-iD EMS Marker Locator kit with Keson PA14. The 1420-iD locates underground EMS markers, reads and writes 3M iD markers, estimates marker depth, and supports dual marker frequency search with RS232/USB PC interface.

The Omron Automation F92A-C-1 is an M18 inductive coupler designed to transmit ON/OFF limit switch signals to compatible inductive proximity sensors without direct electrical contact. Using magnetic coupling between coils, it enables signal transmission across a 5 mm distance. The unit operates without a power supply and is prewired with a 2 m cable. Rated IEC IP67, it supports operation in environments exposed to oil and dust within specified temperature and humidity limits.

Mitsubishi AL2-EEPROM-2 Memory Cassette delivers reliable EEPROM program storage for Alpha2 PLCs, enabling secure backups, transfers, and long-term data retention.

The Allen-Bradley 1606-XLE480EP is a 24V DC, 20A (480W) switched mode power supply from the 1606-XLE Essential series. It supports 100–240V AC input and 110–150V DC input, features adjustable 24–28V output, 20% power reserve, DC OK relay contact, and screw terminals for DIN rail industrial installation.

Eagle Eye Power Solutions VS-Series ventilation system provides 1050 CFM forced-air exhaust for battery rooms, helping purge hydrogen and other gases.

Fluke 725 Calibrator: Measure and source mA, volts, temperature, pressure, and frequency with rugged design for field calibration and troubleshooting.

Black Box IC107A-R2 RS-232↔RS-422/485 converter for data-only serial communication. Supports 4-wire full-duplex operation for point-to-point or multipoint links. Provides a DB25 female RS-232 interface and a 4-pin terminal block for RS-422/485 with TX/RX/PWR LEDs.

Adam Equipment Latitude Compact Bench Scales LBX 12: Simple operation, precise weighing, and long-lasting performance. Perfect for production, warehouse, or field use.

The 9" Long Nose Locking Pliers features a long, straight nose which provides easy access in narrow and hard‑to reach places.

Achieve precise wireless alignment with the Sunsight Classic AAT. Fast, reliable azimuth, tilt, and roll measurements for optimal antenna performance. Built to last

SCHMERSAL SRB301LCI-24V: Reliable 24V safety controller relay with 3 safety contacts, signaling output, and advanced diagnostics for industrial protection.

Tri-Mag Super 6250T2 power supply delivers regulated multi-voltage DC output including +5V, ±12V rails with up to 250 watts capacity for system power distribution and integration applications.

Soft grip rubber handle Insert molded blade for improved grip Precision blade ensures a perfect fit every time

Fluke 700G31 Calibrator: Precise digital pressure measurement up to 10,000 psi with 0.05% accuracy, rugged IP67 design, and easy data logging.