Search results for: 'max the desiner'

Allen-Bradley 700-K40E-* Series B control relay brings compact 4-pole NO switching for industrial control circuits, with IEC-rated performance up to AC-12 690V 10A and clearly marked screw-terminal connectivity.

Static dissipative mat for workstation Heat tolerance: 158°F (70° C) Resistivity Face & Center & Bottom Layers: 10M~1KMΩ/SQ Combination layer: 1K~1MΩ/SQ, Static decay time: < 0.5sec

Fluke Networks MT-8200-49A MicroMapper LAN wiremap tester provides LED fault indication, toner generation, and detection of opens, shorts, miswires, reversed pairs, and split pairs. Main unit only; no remote included.

Fluke 116/323 KIT delivers HVAC multimeter and clamp meter performance with microamp testing, built-in thermometer, and True-RMS accuracy for fast diagnostics.

Fluke BP290 rechargeable Li-ion battery powers 190-Series II Scopemeter tools with 2400 mAh capacity for extended field use and dependable performance.

Square D LXD1G7/LXD3G7 provides a reliable 120V magnetic coil replacement for TeSys D contactors, ensuring dependable actuation and restored control performance.

Transform your network testing with the Viavi NSC-200 Network & Service Companion, paired with the P5000i Digital Analysis Microscope. This all-in-one powerhouse delivers comprehensive fiber, Ethernet, and WiFi testing for streamlined troubleshooting and maintenance. Discover More or Get a Quote Today

The INNO Instrument FFLBT-50 is a rechargeable 11.1V lithium-ion battery pack rated at 3800mAh (42.18Wh). Designed for use with compatible INNO fusion splicers, it provides field-replaceable power in a compact integrated housing with built-in charge indicator.

Siemens 5SY4110-7 SENTRON 10A MCB delivers reliable C-curve circuit protection for 230/400V systems, ideal for industrial, commercial, and control panel applications.

AEMC OX 9304 IV Oscilloscope: Rugged 4-channel 300MHz handheld scope with large LCD, FFT, DMM, Wi-Fi, SD support, and remote access control.

Fluke BP500 Lithium-Ion Battery: High-capacity 3000 mAh replacement for multimeters and analyzers, rechargeable with reliable 7.4 V output.

AEMC LM102 AC Current Probe, 200A range, 1mA/A output, 5 ft lead with banana plugs, 48 Hz–10 kHz frequency, ideal for power analyzers and DMMs.

Wöhler VIS 2xx / 3xx Battery delivers 12 V NiMH power, 2600 mAh capacity, and up to 120 minutes of operation for compatible VIS inspection camera systems.

AEMC 1510 Air Quality Logger: Monitors CO₂, temperature, and humidity with Bluetooth and USB connectivity, built-in alarms, and storage for over one million data points.

The INNO Instrument LBT-50 Battery Pack is a rechargeable 11.1V, 4200mAh Li battery designed for ARC fusion splicer platforms. It provides portable power support for field fiber optic splicing applications and integrates directly with compatible INNO Instrument splicer systems requiring the LBT-50 form factor.

The INNO Instrument LBT-52 is an 11.1V, 5200mAh (57.72Wh) rechargeable lithium-ion battery pack designed for INNO fusion splicers. It features an integrated LED battery level indicator for real-time capacity monitoring and supports approximately 3-hour charging.

Certified pre-owned Sonatest FCG2550 5 MHz 1/4" fingertip compression wave transducer with Microdot connector—ideal for high-resolution flaw detection and thickness measurement in restricted access areas. Compatible with Sonatest Sitescan D-10, Prisma, Veo+, and Masterscan flaw detectors.

Certified pre-owned Sonatest MAP252545T phased array mapping ultrasonic probe—estimated 2.5–5 MHz frequency range, 25 mm aperture, top exit configuration. Delivers rapid area mapping for corrosion, weld, or composite inspection. Compatible with Sonatest Veo3, Prisma, and mapping scanners.

The INNO Instrument LBT-8 is an 880mAh lithium-ion replacement battery designed for INNO TS Plus (TSP-0002 / TS-8+) and TS Pro thermal fiber strippers. It supports approximately 500 stripping cycles of standard 12-fiber ribbon cable in SAVE mode when fully charged. This listing includes the battery only.

Fluke BP7235 NiMH battery pack delivers reliable 7.2V power with 3500 mAh capacity, providing up to 16 hours of runtime for compatible Fluke calibrators.

Fluke BP120MH NiMH battery delivers 3000 mAh capacity and eco-friendly performance for 120 Series ScopeMeters and 43/43B Power Quality Analyzers.

The INNO Instrument Li-ion 216 is a rechargeable lithium-ion battery pack designed for use with INNO Instrument Mini 2 series fiber optic test equipment, including the Mini 2 OTDR. The battery provides an output of 7.4V with a capacity of 4300mAh (31.82Wh) and installs directly into compatible INNO handheld instruments as a field-replaceable power source.

Superior Electric SS50 SLO-SYN AC synchronous motor delivers fixed-speed synchronous operation for motion control systems with 120 VAC input, 72 RPM output, and documented SLO-SYN holding torque characteristics.