Search results for: 'Cable'

Eclipse Tools hook and loop cable ties are crafted from a durable blend of Nylon and P.P. materials. These versatile ties are perfect for securing and organizing cables and patch cables. One of their key advantages is that they won't compromise the transmission performance of your cables due to over-tightening, eliminating concerns about signal interference caused by pinching. With Eclipse Tools hook and loop cable ties, you can maintain a clean and organized cable setup without compromising on performance.

The INNO Instrument CJ-11 is a vehicle power cable designed to operate and charge compatible INNO fiber fusion splicers from a standard 12V car cigarette lighter socket. It supports 9V–14V DC vehicle input and is compatible with select View and IFS series splicers and LBT battery packs.

The INNO Instrument USB-7P is a proprietary USB Type-C to DC power and data cable designed for use with INNO View 12R and View 12R PRO ribbon fusion splicers. It provides a dedicated interface for DC power delivery and device communication specifically configured for INNO splicer architecture not intended for use with non-INNO devices.

Technisonic DFP-0504-GP is a dual element, fingertip ultrasonic probe with a 5 MHz frequency and 0.50" diameter designed for general purpose use. Features integral cable and BNC connector for reliable NDT testing.

Made of high quality ABS material. Application: 3-Blade model RG-59/62/6. Overall Length: 4.1 in.

INNO Instrument V30 Optical Multi Meter combines optical power measurement, visual fault location, and cable continuity testing in a handheld fiber optic test instrument designed for telecommunications installation and maintenance environments.

The IFM Efector E18212 offers a durable 2 m PVC sensor cordset with a 1/2" 3-pin female connector, delivering reliable, sealed connections for industrial automation.

Contacts: 4P4C Cable Type: Flat Wire Type: Stranded Premium Thin Gold Flash Qty: 1000 pcs View all Modular Plugs and Splices

Fluke Networks CFM-TRC-S-MPO24P CertiFiber™ Max Test Reference Cord Set is designed for testing single-mode MPO 24 unpinned cables. The set includes one main and one remote reference cord and supports standards-preferred one-jumper reference methods when used with the CertiFiber™ Max Optical Loss Test Set.

Fluke Networks 26200900 Pro3000 Tone Generator uses SmartTone technology to accurately trace and identify copper cable pairs up to 10 miles.

T&R PT30-10 High Voltage DC Test System: Reliable, portable solution for cable testing up to ±30kV. Designed for safety with automatic discharge and overload protection.

Pomona 3788 BNC Female to Minigrabber Test Clip Breakout enables fast signal access from BNC male cables to dual minigrabber clips, delivering secure low-resistance connections for electronic testing and diagnostics.

Contacts: 8P8C Cable Type: Flat Wire Type: Stranded Premium 50 µin Gold Qty: 1000 pcs View all Modular Plugs and Splices

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

Twist-On For RG59 Cable 100 Connectors

Fisher TW6-KIT is a pipe and cable locator kit for locating and tracing buried conductive utilities using inductive and conductive operating modes. The system operates at 81.92 kHz and includes a search handle, carrying case, and headphones.

The Fluke Networks DSX-CHA021S is a set of two M12D 4-position channel adapters designed for use with DSX Series CableAnalyzer systems. These adapters enable channel testing and certification of installed M12-D links supporting TIA Cat 5e and ISO Class D requirements, including verification of 100BASE-TX transmission performance.

Fluke Networks CertiFiber Pro OLTS: Fast, accurate fiber certification with Wi-Fi connectivity, LCD display, and dual-band optical testing for professionals.

Fluke Cable Fault Finder Pouch: Durable 10-inch carrying case with belt clip, designed for easy travel and secure tool storage.

SKF CMSS65-010-00-12-10 is a CMSS 65 series 5 mm eddy current probe with armored cable, 1/4-28 threaded fully threaded case, 3.0 cm case length, and 1.0 m overall length.

The INNO Instrument USB-8P is a USB Type-C to USB Type-A male cable designed for data connectivity with compatible INNO fusion splicers and related devices. It supports USB 2.0 communication for firmware updates, data export, and accessory interfacing in fiber optic splicing environments.

The Inno Instrument HDMI to USB Cable is a communication interface designed for Inno Instrument VIEW series fusion splicers, including VIEW 3, VIEW 5, VIEW 7, and VIEW 12R models. It connects the splicer’s Micro HDMI port to a standard USB Type-A port on a computer for data transfer, software updates, and graphical interface mirroring.

The Fluke Networks LinkIQ FMC-10G Fiber Media Converter Kit enables fiber Ethernet port testing when used with a LinkIQ tester. The kit supports 1 Gb/s and 10 Gb/s fiber connections and includes media converters, SFPs, fiber patch cords, power bank, and carrying case for portable network troubleshooting.