Search results for: 'automates'

Toshiba VT130H9U4055 H9 drive delivers precise 5HP 460V 3PH motor control with vector control, motor-over-flux braking, and NEMA 1 industrial reliability.

Modicon AS-BDEP-210 115 VAC 8-channel input module with 1.8 kV isolation for 800 Series I/O and 984 PLC racks. Provides reliable ON/OFF detection from 80–132 VAC with fast 10 ms response for stable discrete monitoring in legacy Modicon systems.

Opto 22 IAC5 AC input module provides rugged, optically isolated voltage and switch status sensing for G1 I/O racks in industrial control systems.

Elevate your fiber testing capabilities with the **Viavi E136FB-VFL-AFL SmartOTDR**. This compact, handheld tester supports tri-wavelength analysis at 1310nm, 1550nm, and filtered 1650nm, making it an essential tool for field technicians. Equipped with a Visual Fault Locator (VFL) and APC connector, this device ensures quick identification of faults and secure connections, streamlining FTTH and FTTx network diagnostics. Lightweight and user-friendly, it delivers accurate results with automated analysis. Perfect for telecommunications and data center applications, the Viavi E136FB is your go-to solution for efficient fiber optic testing.

ABB 1SVR427032R0000 switch mode power supply delivers 24 VDC output at 2.5 A from a 100–240 VAC input, with adjustable output voltage from 24–28 VDC and 60 W max load capacity for control and industrial power applications.

Bently Nevada 330101-00-80-05-02-00 3300 XL 8mm Probe built for vibration sensing in 3300 XL monitoring setups, with attached cable and connector shown in the provided images.

Eagle Eye DLV-Ultra battery testing kit with DLV-Pro voltmeter and SG-Ultra hydrometer for measuring voltage, specific gravity, temperature, and discharge performance.

The Emerson KJ2006X1-BK1 Virtual I/O Module (VIM) is designed for DeltaV Safety Instrumented Systems (SIS) with CHARM I/O technology. It simulates up to 96 individually addressable I/O channels for offline system development, logic validation, commissioning preparation, and operator training without physical field wiring.

The Mitsubishi CP30-BA 1-Pole 5A M-Curve Circuit Protector is a compact DIN-rail-mounted supplementary protector designed for low-capacity control circuits. It features a medium-speed hydraulic-magnetic tripping characteristic, 5 A current rating, and supports AC 250 V or DC 65 V operation in industrial control panels.

Schneider Electric CAD50G7 is a TeSys Deca control relay with five normally open contacts and a 120 VAC 50/60 Hz control coil. Rated up to 690 VAC and 10 A, it supports DIN rail or panel mounting and is designed for industrial control circuit applications.

The Omron MY4Z DC24(S) is a general-purpose miniature power relay with a 4PDT contact configuration and 24 VDC coil. Rated for 5 A switching in four-pole applications, it is designed for sequence control and power switching in industrial control systems.

The Allen-Bradley AK-R2-360P500 Dynamic Brake Resistor is an external medium-duty resistor kit designed for PowerFlex 70 and 700 series drives. It provides 360 ohms of resistance with an 86 watt continuous power rating to dissipate regenerative energy during motor braking.

The Honeywell 621-9938RC is a dual-port Serial I/O Module for the IPC 620/621 Programmable Controller System. It provides redundant serial communication, configurable I/O point allocation, DIP switch configuration, front status LEDs, and supports hot-swappable operation in redundant serial I/O architectures.

The MEAN WELL HRP-600-15 is a single-output enclosed AC-DC power supply delivering 15 VDC at up to 43 A. It features built-in active power factor correction, fan cooling with ON-OFF control, and protection against overload, over-voltage, and over-temperature for industrial power applications.

This CCC Series 4 temperature input module set includes one IOM TCW (I-1/201-2/200) and one EIOM TCW (E-1/202-3/200). Both modules are designed for 3-wire GDC RTD temperature inputs and chassis mounting within CCC Series 4 control systems.

The ABB Bailey IMASI02 is an Analog Slave Input module for the Infi 90 Process Management System. It converts analog field signals into digital data for processing by a Multi-Function Processor and interfaces up to fifteen process signals through a single MMU slot.

The ABB Bailey IMFCS01 is an intelligent Frequency Counter Slave Module for INFI 90 and Net 90 DCS platforms. It processes high-speed pulse inputs from field sensors and communicates frequency and period data to a Multi-Function Processor via the slave expander bus for speed monitoring and control.

The Yamatake Honeywell J-HMM00 is a high-level analog input module designed for Distributed Control System (DCS) architectures. Operating on 24 VDC with 60 mA current consumption, it supports multi-point analog signal acquisition for integration within compatible control systems such as MSC10.

The Bently Nevada 16699-03-05-03 is a velocity seismoprobe vibration sensor used for industrial condition monitoring. It converts mechanical vibration into an electrical signal and is designed for housing-mounted vibration measurement on rotating machinery. The sensor features a metal cylindrical body, stud mounting, and a top-mounted three-screw terminal block for field wiring.

The Square D 8501NR61 is an 11-pin plug-in relay socket designed for use with compatible Square D relays and timers. It features single-tier screw clamp terminals and supports both panel and DIN rail mounting for industrial control applications.

Fluke 190-104-III-S portable ScopeMeter oscilloscope delivers 100 MHz bandwidth, four isolated channels, and rugged field performance for industrial waveform analysis and troubleshooting.

Fluke 190-204-III is a 4-channel portable ScopeMeter oscilloscope with 200 MHz bandwidth, isolated inputs, WiFi and USB connectivity, built for high-voltage industrial signal troubleshooting.

Fluke 190-502-III ScopeMeter delivers 500 MHz bandwidth, 5 GS/s sampling, CAT IV safety, and portable oscilloscope performance for industrial troubleshooting.

Fluke 820-2 LED Stroboscope enables non-contact rotational speed diagnostics with high-intensity LED output, quartz accuracy, and sharp stop-motion imaging.

Fluke SOL-INS87-KIT delivers complete PV testing with I-V curve tracing up to 1500V, insulation testing, clamp measurements, and multimeter diagnostics.