Search results for: 'after brand can'

The Ti200 infrared camera delivers the flexibility and performance to allow you to stay on top of innovation, whether it's through industrial or commercial applications. You'll be able to spectrum analyze, detect heat and radiation level variations, or use it for industrial process control — all with wireless speed and ease. And, since it's future-ready, no matter what comes next for your business, so long as you have an infrared camera on hand, you'll be ready.

This set of Permanent Link Adapters from Fluke Networks comes with two tips, two latches, two screws, two top and bottom cases, and two conductive washers. The adapters meet all measurement accuracy specifications for Level IV test equipment, with a typical contact life of over 5,000 cycles. Each adapter measures 3.0 inches by 2.1 inches by 1.2 inches, has a 4.85-foot cable, and weighs approximately 2.4 ounces (channel adapter) or 11.7 ounces (permanent link adapter).

The DSX-PLA004/CHA004 permanent link and channel adapters meet all measurement accuracy specifications for Level IV test equipment. The life of module contacts is >5,000 cycles. Dimensions are 3.0 in x 2.1 in x 1.2 in (75 mm x 54 mm x 30 mm). The permanent link adapter has a 4.85 ft (1.48 m) ±0.25 ft (0.1 m) cable. Weight is ~2.4 oz (68 g) for the channel adapter and ~11.7 oz (332 g) for the permanent link adapter.

This set of Permanent Link Adapters from Fluke Networks comes with two tips, two latches, two screws, two top and bottom cases, and two conductive washers. The adapters meet all measurement accuracy specifications for Level IV test equipment, with a typical contact life of over 5,000 cycles. Each adapter measures 3.0 inches by 2.1 inches by 1.2 inches, has a 4.85-foot cable, and weighs approximately 2.4 ounces (channel adapter) or 11.7 ounces (permanent link adapter).

The DTX-MFM2 fiber module are used with a DTX Series Cable Analyzer to test and certify fiber optic cabling installations. 

Megger DLRO10HD Product Overview

Product Overview

The CFP2-100-Q CertiFiber Pro Quad Optical Loss Test Set (OLTS) helps cabling professionals accomplish more than ever and comes with a Wi-Fi adapter for wireless connectivity to Fluke Networks LinkWare Live software. It's all about accurate, error-free certification, making jobs easier to manage and certifying fiber optic cabling to industry standards, faster.

The Schneider Electric LC1 D line of contactors and overload relays offer high reliability with long mechanical and electrical life and the most complete line of accessories in the industry. They are unique from any other contactors as the 40-80 AMP contactors offer two pre-installed base mounted auxiliary contacts thus reducing the need for additional auxiliaries and in turn reducing size and complexity.

The TE-6700 Seriesis attractively styled, feature-packed temperature sensing products offer ease of installation, user friendliness, and application flexibility in one package.

The compact modular measuring platform EXFO FTB-1 Pro is an all-in-one solution for exhaustive testing of all types of data transmission networks with speeds up to 111.81 Gbit/s. One measuring module (single or double thickness) can be installed on the platform. The type of module determines the measuring capabilities of the platform.

SMLP5-5 is a rugged loss test kit with data storage designed to measure insertion loss on singlemode & multimode fiber networks. Each SMLP5-5 Kit includes an OLS4 quad Optical Light Source and OPM5 Optical Power Meter.

MIT520 insulation resistance tester is designed specifically for  the testing and maintenance of high voltage electrical equipment. The case is rugged and easy to carry, being made of tough polypropylene and achieving an ingress protection rating of IP65. 

The Fujikura 90S+ is a fusion splicer designed for high-speed, low-loss fiber optic splicing. It is an advanced tool that allows for quick, accurate and reliable splicing of single mode and multimode fibers.

The Digiphone+ pinpoints underground cable faults with unprecedented accuracy and sets a new standard by applying innovative audio concepts. This combination results in a pinpointing device for high resistive faults that is unsurpassed in sensitivity.

The Zeus Diagnostic System from Snap-on provides all the functions and repair tips that technicians need to quickly diagnose.

KLASCHKA D-75242 detector can be used to detect the position of a moving object without the need for mechanical contact. This makes it ideal for applications where there is potential for dirt or other contamination to interfere with the operation of traditional mechanical switches. The WIDENT/P is also resistant to wear and tear, making it a more durable solution than mechanical switches.

A MASTERVOLT MASS 24V 100A 3ph Mass battery charger is the perfect solution for charging your batteries quickly and easily. It is designed for the most difficult conditions with an MTBF of 180,000 hours at full capacity and 24/7 use.

Radiodetection's portable GPR system is an easy-to-operate cost-effective way to see what's underground with high contrast color LCD and intuitive keypad-driven operation. Using radar technology, the RD7100 displays an image map of underground features, making it ideal for locating and excavating utilities. The RD7100 can see non-conductive materials, including plastic pipes, making it more versatile than traditional electromagnetic locators and easy to identify the location and depth of buried utilities. The RD7100 is also easy to assemble and transport.

OPM 5 is designed for measuring optical power in all network types and performing insertion loss measurements on multimode or single-mode fiber optic links. Automatic Wavelength Identification Significantly Increases EfficiencyThe standard Wave ID feature automatically detects and sets the receive wavelength(s), preventing setup and measurement errors (when used with OLS series light sources). It significantly increases efficiency and reduces technician errors—and saves testing time—by eliminating the need to test each wavelength individually.

XL-PMI is fluorescence (XRF) analyzers based on Thermo Fisher Scientific technology. XL-PMI is the tool of choice when you need precision, precision and ease of use. It is an ideal tool for analyzing metal alloys for industrial applications or product quality control. It provides immediate non-destructive chemical analysis of materials from alloys from titanium to nickel, and also provides excellent performance for the analysis of foreign inclusions and trace elements. 

The Sumitomo TYPE-72C+ fusion splicer is the latest advancement in fusion splicing technology. With improved performance, reliability, and cutting-edge features, this splicer takes splicing to a whole new level. Building upon the industry-leading features of its predecessor, the TYPE-72C, this compact and lightweight powerhouse offers quick splicing, exceptional durability, and now introduces NanoTune™ technology, revolutionizing the splicing experience with AI algorithms for enhanced efficiency and accuracy. No more costly reworks due to insufficient fiber preparation; the TYPE-72C+ ensures seamless splicing and reduces overall costs. Stay ahead with its Preventive Maintenance feature, which alerts you to upcoming repairs or consumable replacements, minimizing unexpected downtime. With a lightning-fast 5-second splice in Quick Mode and an improved heating time of just 8 seconds, the TYPE-72C+ guarantees swift and efficient performance.

Launch Box