Search results for: 'connectors 20'

INNO Instrument OLL-500-652D-SC-APC OTDR launch fiber cable provides a 500 m singlemode buffer between an OTDR and the fiber under test. Using G.652D 9/125 µm fiber with SC/APC connectors on both ends, it supports near-end connector characterization and reveal events that may be obscured during OTDR trace acquisition.

The INNO Instrument FL-100-SC-APC Singlemode OTDR Launch Fiber Reel is a 100 m fiber launch cable designed for optical time domain reflectometer testing. It provides a controlled fiber segment that allows OTDR measurements to stabilize before the first connection in a fiber link.

The INNO Instrument FL-100-SC-UPC is a 100 m singlemode OTDR launch fiber reel designed for fiber optic testing and link characterization. Featuring SC/UPC connectors on both ends, this launch cable acts as a pulse suppressor and delay line that enables Optical Time-Domain Reflectometers (OTDR) to measure insertion loss.

A handy crimp terminal kit containing an assortment of 800 high-quality colour coded insulated crimp terminals.

The INNO Instrument SC-SM-UPC-30 is a 10-pack of SC/UPC single-mode splice-on connectors designed for 3.0mm fiber cables. Each connector is factory pre-cleaved and pre-polished to support consistent optical performance, with typical insertion loss of 0.15 dB and return loss ≥55 dB.

The INNO Instrument OLL-1000-652D-SC-APC is a 1000 m single-mode OTDR launch fiber reel designed for dead-zone elimination in fiber optic testing. The assembly uses G.652D single-mode fiber and SC/APC connectors to support accurate reflectance and insertion-loss measurement when testing optical links with an OTDR.

Fluke TL82 adapter set provides secure pin and socket connections for automotive testing, supporting voltage, frequency, duty cycle, and resistance checks.

The INNO Instrument SC-SM-APC-30S is a 10-pack of single-mode SC/APC splice-on connectors designed for 3.0mm fiber cables. Featuring a short boot configuration, these pre-cleaved and pre-polished connectors enable fusion-spliced terminations using compatible INNO Instrument fusion splicers.

INNO Instrument PAL-1001 measurement lead set with red and black leads, safety connectors, 1000V CAT II / 600V CAT III rating, and 32A current rating for compatible INNO Instrument power meters and power analyzers.

INNO Instrument PAC-1002 BNC conversion adapter for safety BNC to banana connection, rated 600V CAT III and listed as an accessory for the SPAW7000 power analysis wavecorder.

INNO Instrument PAC-1001 fork terminal adapter pair for connecting a standard 4 mm banana plug to a binding post terminal. Rated 1000V, CAT II, 20A. Includes red and black adapters.

Pomona 2249-C-72 Antenna Cable: 6 ft BNC cable with molded strain relief, PTFE insulation, and gold-plated contacts for noise-free, reliable connections.

The INNO Instrument FL-500-SC-UPC is a 500-meter single-mode fiber optic OTDR launch cable designed for accurate fiber link testing. Built with 9/125 µm OS2 fiber and SC-UPC connectors on both ends, it creates the necessary launch distance to measure insertion loss and reflectance at the first connection point.

The Fluke Networks FI2-7000-MPO-NW is a non-wireless FiberInspector Ultra camera optimized for MPO-12/MPO-24 connectors. It provides automated IEC pass/fail analysis, high-resolution end-face imaging and fast inspection workflows for high-density fiber environments.

Fluke Networks DTX-GFM2 Fiber Module: High-performance 850nm VCSEL & 1310nm FP laser for precise fiber testing. Compact, reliable, and perfect for cable analyzers.

The INNO Instrument FL-300-SC-APC is a 300 m Singlemode launch fiber reel designed for Optical Time Domain Reflectometer (OTDR) testing. It provides a controlled fiber length between the OTDR and the link under test, enabling measurement of the first connector in a fiber span. The reel format protects the fiber during storage and field deployment.

#15(20-16 AWG/0.5-1.0mm²) #30(16-12 AWG/1.0-2.5mm²) #45(14-10 AWG/1.5-4.0mm²)

Pomona 2249-C-36 BNC Antenna Cable delivers durable, noise-free 3 ft connections with gold-plated contacts and molded strain relief for reliability.

Westinghouse Emerson 5X00070G34 is an Ovation analog input module. The front label identifies analog input ranges of ±20 mV, ±50 mV, and ±100 mV. Module only.

1 x Pomona 2249-C-24 BNC Male to Male Antenna Cable (2 ft)

Pomona 2249-C-60 BNC test cable delivers impedance-matched 50 ohm performance with molded strain relief, gold-plated contacts, and noise-free signal transfer.

Pomona 2249-C-96 BNC test cable delivers impedance-matched 50 ohm performance with molded strain relief, gold-plated contacts, and noise-free signal transfer.

Pomona BNC cable ensures noise-free signal transfer with gold-plated contacts, PTFE insulation, and durable molded strain relief for lasting performance.