Search results for: 'disc 2'

The Rohde & Schwarz FSH-Z44 directional power sensor is compatible with FSH handheld analyzers and supports 200MHz–4GHz forward and reverse RF power measurement from 30mW to 120W for transmitter and antenna testing.

The EXFO MaxTester 730C is a handheld singlemode OTDR configured for 1310 and 1550 nm fiber testing. This unit includes an installed PM-MAX-2X power meter hardware module and RF capability with Wi-Fi and Bluetooth for combined OTDR and power measurement.

INNO Instrument PAC-1003 is a screw-type safety adapter for compatible test cable connections, rated 600V CAT II and 20A, supplied in red and black.

The Inno Instrument UN1CO Backpack is designed for FTTH installers who require organized transport of splicing equipment and field tools. With a reinforced equipment compartment and three internal storage pockets, the UN1CO supports structured tool management.

The Inno Instrument USB-5P is a USB 2.0 Mini-B (5-Pin) to Type-A cable designed for data transfer and PC connectivity with compatible Inno fusion splicers. It supports high-speed communication up to 480 Mbps and is commonly used for firmware updates and device interface.

INNO Instrument PAC-1006 large alligator clip adapter set with red and black insulated clips, safety connector interface, and 600V CAT IV 19A rating.

The INNO Instrument USB-8P is a USB Type-C to USB Type-A male cable designed for data connectivity with compatible INNO fusion splicers and related devices. It supports USB 2.0 communication for firmware updates, data export, and accessory interfacing in fiber optic splicing environments.

INNO Instrument PTB03 is a three-phase wiring adapter box used as a test converter for switching three-phase connections during electrical measurement and power analysis workflows.

INNO Instrument PAL-1003 external sensor connection cable with BNC connector for connecting external CT or VT sensors to compatible INNO Instrument SPA series power analyzers.

INNO Instrument PAC-1007 small alligator adapter pair with safety connector, rated 300V CAT II 15A, in red and black.

The INNO ICC-48 Backpack for Workstation is a dedicated carrying solution designed for INNO workstation systems. It supports transport and storage of compatible workstation components in field and ground-based working environments. Backpack only.

The INNO Instrument CH-01 Universal Fiber Holder is a cleaver accessory designed to secure multiple fiber cable types during the cleaving process. It supports 250µm and 900µm fiber, flat or drop cable enabling technicians to work across common installation formats without changing holders. Compatible with select INNO high-precision cleavers.

The INNO Instrument HTS-SOC-01 is a heater cover accessory designed for use with compatible INNO fusion splicers. It replaces the standard heater cover to support splice-on connector (SOC) termination workflows where connector geometry requires an alternate heater configuration.

The INNO Instrument CG-23 Cooling Tray is an accessory designed for use with INNO View Pro series fusion splicers. It provides a dedicated location to position heat-shrink protection sleeves after the heating cycle. Compatible with View 3 PRO, View 5 PRO, and View 8 PRO models.

The INNO Instrument LBT-50 Battery Pack is a rechargeable 11.1V, 4200mAh Li battery designed for ARC fusion splicer platforms. It provides portable power support for field fiber optic splicing applications and integrates directly with compatible INNO Instrument splicer systems requiring the LBT-50 form factor.

The INNO Instrument EG-18 Electrode Grinder is a portable maintenance tool designed to resurface tungsten electrode rods used in fiber optic fusion splicers. It restores electrode tip geometry to support stable arc discharge and consistent splicing performance in field and lab environments.

The INNO Instrument UN1CO Mobile is a compact fiber splicing workstation tray designed to securely support a fusion splicer and cleaver during field operations. Constructed from reinforced plastic, the tray provides integrated magnetic fixing, a dedicated cleaver mount, and organized compartments for splice protection sleeves and cleaning liquids.

Honeywell R4138D 1016 flame safeguard control designed for industrial burners and boilers. Provides supervised ignition sequencing, flame monitoring, and safety shutdown on flame failure.

Wöhler 4798 Power Supply provides charging and operating power for compatible Wöhler VIS 2xx and VIS 3xx inspection camera systems. The adapter accepts 100–240 V input and delivers regulated 18 V, 1.5 A output with a typical charging time of about 3 hours.

The INNO Instrument E-50 Electrodes are replacement consumables designed for use with compatible INNO fusion splicers. Supplied as a matched pair, they generate the controlled electrical arc required for fiber fusion. The E-50 set supports routine maintenance and consistent splicing performance within fiber optic installation and service workflows.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

INNO Instrument PTB01 is a single-phase wiring test adapter box used for switching single-phase circuits to support power coefficient measurement and related electrical testing workflows.

INNO Instrument PAL-1001 measurement lead set with red and black leads, safety connectors, 1000V CAT II / 600V CAT III rating, and 32A current rating for compatible INNO Instrument power meters and power analyzers.