Search results for: 'innox'

The INNO Instrument CG-24 Cooling Tray is a standard accessory designed for the INNO Instrument A3 Fusion Splicer. It provides a dedicated, heat-resistant surface for fiber optic protection sleeves immediately after oven heating.

The INNO Instrument JS-180300 is a 19V AC adapter and battery charger designed for INNO View series fusion splicers and compatible instruments. It provides 19V DC output at 3.42A with universal 100–240V AC input, supporting global mains standards. Desktop-style construction with attached DC output cable.

The INNO USB Type-C to USB Type-A (Female) Cable is an OTG adapter designed for INNO View-series fusion splicers equipped with a USB-C interface. It enables connection of standard USB-A peripherals such as flash drives, mice, or keyboards for data transfer and accessory operation.

The INNO B-80 is a 16-position replacement blade designed for INNO fiber cleavers including V7, V7+, V10, V11, V12, V17, VF-15, VF-15H, and VF-78 models. Rated for up to 48,000 cleaves, the B-80 replaces the B-77 blade and supports consistent fiber cleaving in installation and maintenance environments.

The INNO Instrument ACC-25-B AC Power Cable is a standard AC input cord designed to connect compatible INNO Instrument AC adapter blocks to a wall outlet. Featuring a 2-pin wall plug and C7 “Figure-8” connector, it supports 100–240V AC operation when used with approved adapters such as the JS-1618 and JS-180300 for View and M series fusion splicers.

The INNO Instrument CJ-11 is a vehicle power cable designed to operate and charge compatible INNO fiber fusion splicers from a standard 12V car cigarette lighter socket. It supports 9V–14V DC vehicle input and is compatible with select View and IFS series splicers and LBT battery packs.

The INNO Instrument LBT-3000-02 is an 11.1V, 3000mAh lithium-ion battery pack designed for the INNO Instrument A3 fusion splicer and compatible M-series models including M7 and M9. Rated at 33.3Wh, it provides portable operating power for field splicing applications and features an integrated LED battery status indicator.

The INNO Instrument HTS-SOC-01 is a heater cover accessory designed for use with compatible INNO fusion splicers. It replaces the standard heater cover to support splice-on connector (SOC) termination workflows where connector geometry requires an alternate heater configuration.

The INNO Instrument CG-23 Cooling Tray is an accessory designed for use with INNO View Pro series fusion splicers. It provides a dedicated location to position heat-shrink protection sleeves after the heating cycle. Compatible with View 3 PRO, View 5 PRO, and View 8 PRO models.

The INNO Instrument LBT-50 Battery Pack is a rechargeable 11.1V, 4200mAh Li battery designed for ARC fusion splicer platforms. It provides portable power support for field fiber optic splicing applications and integrates directly with compatible INNO Instrument splicer systems requiring the LBT-50 form factor.

The INNO Instrument JS-1618 AC Adapter is a 12.6V DC power supply engineered for the View 1, M7, M9, and A3 fusion splicers. It supports direct instrument operation and charging of compatible internal battery packs. The adapter accepts 100–240V AC input for global deployment and provides regulated 12.6V DC output at 1.8A.

INNO Instrument FH-12F Fiber Series ribbon fiber holder for 12-fiber flat ribbon cable, supporting 200 µm and 250 µm coatings and compatible with View12R, View12R-200, and View12R PRO detachable setups.

INNO Instrument PAC-1002 BNC conversion adapter for safety BNC to banana connection, rated 600V CAT III and listed as an accessory for the SPAW7000 power analysis wavecorder.

The INNO Instrument USB-8P is a USB Type-C to USB Type-A male cable designed for data connectivity with compatible INNO fusion splicers and related devices. It supports USB 2.0 communication for firmware updates, data export, and accessory interfacing in fiber optic splicing environments.

The Inno Instrument HDMI to USB Cable is a communication interface designed for Inno Instrument VIEW series fusion splicers, including VIEW 3, VIEW 5, VIEW 7, and VIEW 12R models. It connects the splicer’s Micro HDMI port to a standard USB Type-A port on a computer for data transfer, software updates, and graphical interface mirroring.

The INNO Instrument CH-01 Universal Fiber Holder is a cleaver accessory designed to secure multiple fiber cable types during the cleaving process. It supports 250µm and 900µm fiber, flat or drop cable enabling technicians to work across common installation formats without changing holders. Compatible with select INNO high-precision cleavers.

INNO Instrument PTB02 is an external sensor connection fittings accessory identified in the SPAW7000 accessory catalog for power analysis wavecorder setups.

INNO Instrument PAC-1005 Safety Terminal-Mini Clip Adapter (Hook Type) for electrical measurement connections, confirmed as compatible with the SPAW7000.

INNO Instrument PAC-1001 fork terminal adapter pair for connecting a standard 4 mm banana plug to a binding post terminal. Rated 1000V, CAT II, 20A. Includes red and black adapters.

The INNO Instrument LBT-3000 is an 11.1V, 3000mAh lithium-ion battery pack designed for compatible INNO fusion splicers including the M7, M9, A3, IFS-15M, and IFS-15M+. It provides 33.3Wh capacity and features an integrated LED charge indicator for field power management.

The INNO Instrument LBT-52 is an 11.1V, 5200mAh (57.72Wh) rechargeable lithium-ion battery pack designed for INNO fusion splicers. It features an integrated LED battery level indicator for real-time capacity monitoring and supports approximately 3-hour charging.

The INNO Instrument UN1COLK UN1CO Ladder Mount Work Platform is an ABS workstation designed for secure positioning on ladder rungs during fiber splicing operations. It provides a stable surface for INNO View series fusion splicers and common industry cleavers in elevated or confined environments.