Search results for: 'instasamka'

Discover the Hexatronic Ribbonet Air Blown Fiber Installation Tool. This portable, efficient tool uses compressed air and an electric motor for fast fiber installations. Perfect for microduct applications, it ensures quick and reliable setups. Learn more about its benefits and how it can enhance your fiber optic installations today!

The INNO Instrument Ribbon Holder are fiber ribbon holders designed for use with INNO Instrument View12R and View12R PRO fusion splicers. The holder supports 250 µm ribbon fiber during the splicing process, maintaining fiber alignment and stability within the splicer. Its detachable design allows quick installation and removal when preparing ribbon fibers for fusion splicing.

Durable ABS cases allow for various PCB mounting positions. Adhesive feet and screws are included.

Fluke BP190 rechargeable NiMH battery pack delivers 7.2V power for ScopeMeter 190, 190C, and 430 Series instruments, providing reliable internal power with OEM-matched fit and capacity.

INNO Instrument FH-SOC fusion splicer SOC holder for use with compatible INNO Instrument fusion splicers, including View 12R, View 12R PRO, View 3 PRO, and M Series.

INNO Instrument PAL-1001 measurement lead set with red and black leads, safety connectors, 1000V CAT II / 600V CAT III rating, and 32A current rating for compatible INNO Instrument power meters and power analyzers.

The INNO Instrument SC-SM-APC-09 is a field-installable SC/APC singlemode splice-on connector supplied in 10 a pack. Designed for fusion splicer termination, the connector houses and protects the fusion splice within the connector body, eliminating separate splice trays. The cleaved and polished ferrule supports repeatable field assembly.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

Fluke JackRapid Termination Tool: Terminate jacks 8x faster with ergonomic, one-handed operation and reliable, high-quality connections.

The Inno Instrument UN1CO Backpack is designed for FTTH installers who require organized transport of splicing equipment and field tools. With a reinforced equipment compartment and three internal storage pockets, the UN1CO supports structured tool management.

The INNO Instrument LBT-3000-02 is an 11.1V, 3000mAh lithium-ion battery pack designed for the INNO Instrument A3 fusion splicer and compatible M-series models including M7 and M9. Rated at 33.3Wh, it provides portable operating power for field splicing applications and features an integrated LED battery status indicator.

The Thermo Environmental 2200-0-010 Heater Control Module (P/N 22000010) is an industrial control board designed for regulated heater management within environmental and analytical systems. This module functions as a temperature control component in Thermo Environmental instrumentation platforms.

Fluke Networks 44200013 double slotted stripper enables clean insulation removal for 22/24 AWG JKT station wire during telecom installations.

Fluke C799 field soft case protects Fluke 75X series instruments while allowing keyboard access, test lead routing, and storage for modules and cables.

The INNO Instrument LI-ION 225 is a lithium-ion replacement battery designed for use with the INNO Instrument View600 Optical Time Domain Reflectometer (OTDR). This battery provides portable power for field testing environments where the View600 OTDR is deployed for fiber optic network verification and troubleshooting.

Fluke 1662 tester provides essential installation testing with insulation, continuity, loop, RCD and polarity checks, plus memory for storing onsite measurements.

The INNO Instrument CG-24 Cooling Tray is a standard accessory designed for the INNO Instrument A3 Fusion Splicer. It provides a dedicated, heat-resistant surface for fiber optic protection sleeves immediately after oven heating.

The INNO Instrument JS-1500 is a 12V DC AC power adapter and charger designed for INNO thermal strippers including the TS-PRO and TS-PLUS. It provides stable DC output for heater operation while recharging the internal battery.

The INNO Instrument  Universal Fiber Holder is an accessory designed for INNO fusion splicers to position and secure optical fibers during splicing. The holder supports multiple fiber preparation types and provides stable alignment inside the splicer. Variant options support different splicer models and left or right holder configurations.

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

The INNO Instrument ACC-25-B AC Power Cable is a standard AC input cord designed to connect compatible INNO Instrument AC adapter blocks to a wall outlet. Featuring a 2-pin wall plug and C7 “Figure-8” connector, it supports 100–240V AC operation when used with approved adapters such as the JS-1618 and JS-180300 for View and M series fusion splicers.

Fireye 60-2919-1 is a 1 in NPT mounting flange for Phoenix and InSight II flame scanner installations, supporting scanner mounting, purge air routing, and thermal isolation in burner systems.

The INNO Instrument LBT-50 Battery Pack is a rechargeable 11.1V, 4200mAh Li battery designed for ARC fusion splicer platforms. It provides portable power support for field fiber optic splicing applications and integrates directly with compatible INNO Instrument splicer systems requiring the LBT-50 form factor.