Search results for: 'outputs instaplayers'

The Emerson Ovation WH5D-2FF / 1X00416H03 power supply module provides regulated 24 VDC output for Ovation distributed control system backbones. The enclosed industrial module supports high-current control applications using wide-range AC or DC input power.

The Keyence SL-U2 is a switching-type power supply unit designed for industrial safety applications. It provides a regulated 24 VDC output at up to 1.8 A from a universal 100–240 VAC input and is intended for use with Keyence safety light curtain systems.

Fluke Networks 30W Power Supply ensures efficient 15V DC output and quick charging for CableAnalyzer devices with US adapter.

The INNO Instrument JS-1500 is a 12V DC AC power adapter and charger designed for INNO thermal strippers including the TS-PRO and TS-PLUS. It provides stable DC output for heater operation while recharging the internal battery.

The Allen-Bradley 1606-XLE480EP is a 24V DC, 20A (480W) switched mode power supply from the 1606-XLE Essential series. It supports 100–240V AC input and 110–150V DC input, features adjustable 24–28V output, 20% power reserve, DC OK relay contact, and screw terminals for DIN rail industrial installation.

The Crouzet PJR 110A P4700 is a plug-in alternator control relay operating on a 110 VAC supply. The module provides SPDT relay output rated at 10 A and is housed in a compact rectangular enclosure with front position indicators. Used in control and protection circuits where monitored voltage conditions determine relay actuation.

Macro Sensors LVC-2500 Low Voltage Conditioner delivers DIN-rail LVDT and half-bridge signal conditioning with selectable 3 kHz, 5 kHz, or 10 kHz excitation, adjustable gain and offset, voltage and current outputs, and link-selectable analog math functions.

Fluke i200S AC Current Clamp delivers accurate non-intrusive AC current measurement from 0.5A to 240A using a BNC voltage output, ideal for multimeters, oscilloscopes, and power quality tools.

Honeywell 380-01873-100 I/O Interface Module enables remote monitoring and control of field devices using RS485 Panel Bus™ communication with 34 configurable I/O points for scalable building automation systems.

AEMC MN251T AC Current Probe: 200A range, 1mV/A output, 10ft BNC lead—ideal for DMMs and voltage-input instruments needing accurate current readings.

Transmation 3510T-03-06-07-65-71-72 3510T current transmitter module designed for industrial signal conditioning. Converts input signals to a standardized 4–20 mA DC output for reliable process control transmission.

Moore Industries IPT2 current-to-pressure transmitter converts a 4-20 mA signal into a proportional 6-30 psig pneumatic output for valves, dampers, and pneumatic actuators in process control systems.

Toshiba VFS11-4015PL-WN VF-S11 transistor inverter for 3-phase AC motor control. Rated 2 HP with 380–500 V input/output and 0.5–500 Hz output frequency range.

E.I.L A-11537 delivers reliable 0–150 VAC to 4–20 mA signal conversion for PLC monitoring, providing clean, noise-resistant industrial voltage measurement.

Eagle Eye VGM-Series battery voltage and ground fault monitor with color touchscreen and Ethernet web interface for DC battery systems, delivering clear status monitoring and alarm output control.

Moore Industries RBX/3W80-160/4-20MA/12-42DC-EZ100[HP] resistance bulb transmitter with 3-wire RTD input, 4-20mA output, 12-42VDC loop power, and front Zero/Span adjustment.

Siemens SITOP select diagnosis module 6EP1961-2BA00 for 24 V DC systems. 4-channel electronic module (4x 10 A) that distributes and monitors load current with adjustable trip thresholds from 2–10 A. Supports selective channel shutdown on overload/short circuit with common signaling contact.

Eagle Eye GFM-100 battery ground fault monitor with color touchscreen, Ethernet web interface, Modbus TCP/IP, and 4 Form C contacts for real-time monitoring of DC battery systems.

Phoenix Contact QUINT-PS/1AC/24DC/10 DIN-rail power supply provides 24 V DC (adjustable 18–29.5 V) at 10 A from a wide-range 1-phase AC or DC input. Includes DC OK signaling, BOOST indication, and SFB technology support.

The Banner SM912F Valu-Beam sensor delivers reliable infrared fiber optic detection for industrial automation, with NPN/PNP outputs and compatibility with Banner fiber cables.

The TCI AS-B875-002 KLC25BE dv/dT Guard Output Filter is designed to protect AC motors driven by PWM variable frequency drives. Rated for 25 A, 3-phase, 480 V systems, it limits voltage spikes and dV/dt effects that can damage motor insulation and cabling.

The REXA Koso S96111 Pulse Mod I/O Interface PCB Board is an internal electronic module used in REXA Electraulic™ actuators. It supports pulse modulation control and manages input and output signals within the actuator’s control system for precise positioning and communication.

T&R PT30-10 High Voltage DC Test System: Reliable, portable solution for cable testing up to ±30kV. Designed for safety with automatic discharge and overload protection.

Ronan X96-1000CB R14 is the core control board for X96S microprocessor systems, processing detector signals and enabling modular I/O and industrial communications for measurement applications.