Search results for: 'status use'

Siemens SM-30 580-821670 Switch Module delivers two manually operated SPDT switches for fire alarm and control functions including signal silence, relay activation, disconnect, drill, override, and bypass control.

Allen-Bradley 1771-ID16 16-point isolated AC/DC digital input module for PLC-5 systems, designed to interface 120V field devices with reliable filtering, isolation, and chassis-based I/O integration.

The INNO Instrument LBT-3000-02 is an 11.1V, 3000mAh lithium-ion battery pack designed for the INNO Instrument A3 fusion splicer and compatible M-series models including M7 and M9. Rated at 33.3Wh, it provides portable operating power for field splicing applications and features an integrated LED battery status indicator.

The Eclipse Tools Receptacle Tester for Standard Outlets tests for correct wiring. It can be plugged in to check outlet polarity, and a light pattern is displayed to indicate status. This is a UL approved and RoHS compliant tester.

Eaton XTCEXSAB01 delivers a reliable 1NC side-mount auxiliary contact for XT Series DILM/DILA contactors, ideal for industrial control and high-intent PLC signaling.

The Yamatake Honeywell J-MSC10 is an industrial system module used in DCS and automation control environments. Designed for reliable operation, it supports industrial control architectures and is suitable for integration into advanced multifunction controller systems.

Crydom Crouzet DR-ODC5 relay delivers fast, isolated DC load switching with a 5V control signal, DIN-rail mounting, and an LED indicator for industrial automation.

The Functional Devices RIB2401B is a 20 Amp SPDT power control relay with a continuous duty coil and multi-voltage input of 24 Vac/dc or 120 Vac, 50–60 Hz. Housed in a NEMA 1 enclosure accepted for plenum use, it includes a visible LED status indicator and 16-inch 600V rated lead wires. The relay supports general purpose, ballast, pilot duty, tungsten, and motor loads within its published ratings.

Eaton PKZM0-6,3 manual motor protector with attached NHI21-PKZ0 auxiliary contact block provides manual motor switching, overload protection, and control-circuit status contact expansion for low-voltage motor control assemblies.

The Allen-Bradley 800T-Q10R is a 30mm red pilot light with a full-voltage incandescent lamp rated for 120V AC/DC. Designed for industrial control panels, it features a metal operator construction, screw terminal connections, and compatibility with NEMA Type 1, 4, 12, and 13 enclosures.

The ABB RDIO-01 is a digital I/O extension module designed for use with ABB drive systems. It provides three digital inputs and two relay outputs for expanding control and monitoring functions within compatible ABB drive architectures.

Fluke Networks FINDFIBER FindFiber Remote ID Source enables fast optical fiber identification when used with a SimpliFiber Pro power meter, allowing single-technician verification of fiber routing and polarity.

GE C208LSIR MicroVersaTrip Plus Trip Unit delivers replacement circuit breaker trip control with front-panel setup access, status display, and 800A sensor designation for compatible GE breaker systems.

2-5 Mins quick heat up time 1.5 hour operation time Cordless design to work anywhere Ceramic heater provides stable temperature Drip control prevents unwanted glue on project Status indicator light Convenient USB charging Consumption: 8W Flow Rate: 3g per min Preheating Time: 2 - 5 min Input Voltage: 5V Melting Temperature: 266°F Indicator Light: Blue (In Use) / Green (Fully Charged) / Red (Charging) Glue Sticks: Ø7mm (not included) Charging Time: 200 minutes Operating Time: 90 minutes Power Source: 3.6V Li-ion Battery (2000mAh)

Allen-Bradley 1771-IAD PLC-5 digital input module with 16 AC/DC inputs. Designed for 120V industrial signals, reliable discrete device monitoring, and seamless integration into 1771 I/O chassis.

The Honeywell 621-9938RC is a dual-port Serial I/O Module for the IPC 620/621 Programmable Controller System. It provides redundant serial communication, configurable I/O point allocation, DIP switch configuration, front status LEDs, and supports hot-swappable operation in redundant serial I/O architectures.

Fluke Networks 26200900 Pro3000 Tone Generator uses SmartTone technology to accurately trace and identify copper cable pairs up to 10 miles.

Omron MK3P5-S relay: Reliable 3PDT switching with mechanical indicator and test button for precise control in industrial applications.

Phoenix Contact PLC-BSC-24UC/21-21 relay base for 24V AC/DC PLC relays, with LED status display and DIN rail mounting, ideal for automation control systems.

Emerson Ovation 1C31219G01 Relay Output Electronics Module for interfacing between the Ovation controller and mechanical relays in a relay output assembly.

Westinghouse Ovation 1C31179G02 Remote I/O MAU module for distributed control system remote I/O communication and field device integration.

ProSoft MVI56E MNET provides reliable Modbus TCP/IP client/server communication for ControlLogix systems, enabling seamless integration with Modbus devices.

The Weidmüller 1122-8800-00 TRZ 24VDC 1CO is a slim DIN rail relay interface module with a 24 V DC control voltage and one changeover (SPDT) contact. It supports up to 6 A switching current and uses tension-clamp connections for secure, screwless wiring in control cabinets.