Search results for: 'key and que key'

The Fluke i1010 is an AC/DC current clamp designed for use with digital multimeters. It measures currents from 1 A up to 1000 A DC and up to 600 A AC using a Hall-effect sensor. The clamp outputs 1 mV per amp for direct reading on compatible meters.

Square D 2510KG1 manual switch delivers reliable 30A control for single-phase systems with a 2-pole toggle design and non-reversing operation in a compact NEMA 1 enclosure.

The Allen-Bradley AK-R2-360P500 Dynamic Brake Resistor is an external medium-duty resistor kit designed for PowerFlex 70 and 700 series drives. It provides 360 ohms of resistance with an 86 watt continuous power rating to dissipate regenerative energy during motor braking.

Cantex 51337141 PVC Junction Box provides 12 x 12 x 4 molded rigid PVC protection for wires and terminals, with a gasketed cover for electrical device and fixture support.

Thermo Scientific Niton XL3t 700S handheld XRF analyzer for nondestructive elemental analysis across metals, plastics, soils, and electronic materials, with multi-application modes including mining, electronics, consumer goods, and car catalyst mode.

The Fluke 87V MAX Digital Multimeter Solar PV Lead Kit combines the IP67-rated 87V MAX True-RMS multimeter with Pomona PVLEAD1 MC4 solar PV connector test leads. Designed for electrical troubleshooting in harsh environments, it supports AC/DC voltage up to 1000 V, 10 A current, resistance, capacitance, frequency, and temperature measurements. The included MC4 to 4 mm leads enable direct voltage verification on photovoltaic arrays while maintaining IEC / EN 61010-031 compliance.

Sprecher + Schuh CS7E-31E control relay with attached CS7-PV auxiliary contact block. Rated for up to 690V AC, this 4-pole industrial control relay is used for switching control circuits in panel and machine control applications.

Eaton XTCEXFAC20 auxiliary contactor supports control-panel auxiliary switching with two normally open contacts and visible AC/DC ratings.

Fluke MFTK-MM850-SM1310 – Complete MultiFiber Pro OLTS kit with MF-100 power meter and dual light sources (850 nm multimode, 1310 nm singlemode) for Tier-1 MPO loss, polarity, and continuity testing in data-center and telecom networks.

Hubbell Killark ENY-4TM 1-1/4 in Duraloy iron explosion-proof sealing fitting with nipple for vertical or horizontal conduit in hazardous locations.

The Eaton P1-25/V/SVB is a 25 A, three-pole main switch from the Eaton Moeller® P1 series designed for rear mounting applications. It features a door-coupling rotary drive with a red rotary handle and yellow locking ring, and supports emergency switching off functionality. The switch is rated up to 690 V AC, provides IP65 front protection, and is lockable in the 0 (Off) position for secured isolation.

Allen-Bradley 193-T1AB48 bimetallic overload relay delivers adjustable 3.5-4.8 A motor overload protection with Class 10 tripping, phase-loss sensitivity, and manual or automatic reset for motor starter assemblies.

ABB P350/702 power supply delivers regulated DC outputs from 110V/220V AC input for telecommunications and industrial power distribution applications.

The Olympus Vanta VCR-XXC-A3-U handheld XRF analyzer supports alloy identification and positive material identification (PMI) using the AlloyPlus licensed application, enabling rapid alloy grade matching for inspection, maintenance, and quality control workflows.

Schneider Electric Telemecanique LC1D09 is a 3-pole AC contactor with a 120V 50/60Hz coil, rated 9 A in AC-3 applications, with integrated auxiliary contacts.

Quickly locates, traces, and verifies electrical, data, and telecom cables—live or de-energized. The 6683 features dual tracing modes, NCV detection up to 1000 Vac, and digital transmitter ID coding.

Olympus OmniScan X3 64:128 phased array and TFM flaw detector with 64 pulsers, 128 receivers, full 64 element aperture, up to four TFM groups, live TFM envelope, AIM visualization, IP65 enclosure, and 10.6 in touchscreen.

New AEMC 603 TRMS Clamp-On Meter, 3000A AC/DC with True InRush®, voltage, resistance, frequency, and temperature measurement. CAT IV 1000V rated, rugged IP54 housing.

The Thermo Scientific Niton XL2 980 Plus is a handheld XRF analyzer equipped with the General Metals license for routine alloy identification. It supports fast, on-site verification of ferrous and non-ferrous metals in inspection, quality control, and materials handling environments.

Thermo Scientific Niton XL3t 985 Ultra portable XRF analyzer delivers powerful field-ready elemental analysis with 45 mm² SDD performance, enhanced light-element capability, and General Metals support for confident metals testing.

The Thermo Scientific Niton XL2 Precious is a handheld X-ray fluorescence (XRF) analyzer designed for rapid, non-destructive analysis of precious metals. It supports purity verification and elemental composition analysis for jewelry, bullion, coins, and finished precious metal products.