Search results for: 'rate.'

The Mitsubishi CP30-BA 1-Pole 10A M-Curve Circuit Protector is a compact supplementary circuit breaker designed for protection of low-capacity control circuits, motors, and transformers. It supports AC 250 V and DC 65 V operation and mounts on a standard 35 mm DIN rail using screw terminals.

The Mitsubishi CP30-BA 1-Pole 3A M-Curve Circuit Protector is a compact hydraulic-magnetic supplementary protector designed for low-capacity control circuits. It supports AC 250 V and DC 65 V operation, offers 2.5 kA breaking capacity, and mounts on standard DIN rail using screw terminals.

ZORO Select model 6UEE7 is an electric sequencer designed for HVAC and refrigeration systems. It operates on 24V AC control voltage and features two switches with adjustable on and off timing. Rated for up to 25A resistive load, it supports horizontal or vertical installation.

Cornell Dubilier 677-9344 CGS342T350X5L is a CGS-series aluminum electrolytic capacitor rated at 3400µF and 350VDC. It features screw terminals, chassis mounting, and is designed for high current filtering or energy storage applications.

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

The Allen-Bradley 800B-N5W is a white LED lamp designed for use with Bulletin 800B 16 mm illuminated push-button and pilot light operators. Rated for 120V AC operation, this LED bulb provides consistent white illumination with low power consumption and extended service life in industrial control panel applications.

The Siemens 5SJ4210-7HG42 is a 2-pole miniature circuit breaker from the 5SJ4 Series, rated at 10 A and up to 277 V. It provides thermal-magnetic overcurrent protection for branch circuit and feeder applications and is designed for standard 35 mm DIN rail mounting.

Fluke TP175E TwistGuard Test Probes provide adjustable 2mm probe tips with integrated 4mm adapters, delivering safety-rated electrical testing for multimeters while minimizing exposed metal during measurements.

Pomona 6733-2 is a 50 ft red silicone insulated test lead wire designed for fabricating custom test leads, jumpers, or patch cords. It uses 18 AWG bare copper conductors with a high strand count for flexibility and is the same wire used in Pomona test leads and patch cords.

Schneider Electric 750XCXH-120A is an 11-pin octal plug-in power relay with a 120 VAC coil and 3PDT contact form. Designed for general-purpose and hazardous-location applications, it features silver alloy, gold-flashed contacts and continuous-duty operation.

Philips 3186GH242T450APA9 aluminum electrolytic capacitor designed for industrial power electronics, offering 2400µF capacitance, 450VDC rating, and 525V surge handling in screw-terminal form.

Fluke 1738/EUS Power Logger captures three-phase voltage, current, power, and harmonics with Fluke Connect compatibility for advanced energy analysis.

Fluke TP38 probes offer slim insulated tips for safe access to tight terminals, featuring hardened stainless steel tips and CAT IV 600V safety rating.

The Amprobe VP-440 detects AC voltage from 100–1000V using a safe, non-contact method with visual indication and CAT III 1000V safety rating.

Fluke ISLS8 insulated slotted screwdriver offers 1000 V safety, ergonomic soft-grip handle, and slim shaft access for precision electrical work.

Amprobe NCV-1040 Voltage Probe: Detect AC voltage safely without contact, identify polarity, and locate cable breaks for industrial and residential use.

Binder 99-5609-19-04 M16 connector provides IP67 sealing, 4-pin signal connectivity, and shieldable solder termination for reliable industrial wiring applications.

Tele Controls RM024LD relay delivers reliable 24VDC switching with LED status and diode protection, ideal for RM series industrial control and automation systems.

Eaton XTCE012B10TD contactor delivers reliable 3-pole motor control with a 24V DC coil, 12A rating, and IEC compatibility for XT series motor starter systems.

Allen-Bradley 871A-TS5-DM1 M12 5-Pin field-attachable connector offers reliable IP67 wiring for sensors and automation devices, supporting 6–8 mm cables.

Eaton WMZT2D01T delivers reliable DIN-rail branch circuit protection; a 2-pole 1A Type D breaker ideal for high-inrush loads and compatible with WMZT accessories.

Hubbell HBL4720C Twist-Lock Plug delivers 15A, 125V AC L5-15P locking power connection with black/white nylon Insulgrip construction and 2-pole, 3-wire grounding.

Appleton VU100M hazardous location incandescent luminaire delivers enclosed and gasketed 60–150 W A-21 lighting for wet and corrosive industrial areas requiring Class I, Division 2 performance.