Search results for: 'support'

Fluke FI-500TP-U25F adapter tip enables accurate inspection of 2.5 mm SC, FC, and ST fiber patch cords with FI-500 FiberInspector Micro.

Fluke Networks OptiFiber Pro OFP2-100-S – Singlemode OTDR for Tier-2 fiber certification at 1310/1550 nm. Features SmartLoop™ bi-directional testing, ultra-short event dead zones, and LinkWare™ Live integration for efficient singlemode fiber troubleshooting.

Special value kit for electrical professionals looking to add DC and AC current measurement capability to their digital multimeter. Includes a Fluke i410 AC/DC current clamp and a roomy zippered vinyl carry case with movable divider and storage for test leads, probes, and manuals.

The Sprecher + Schuh D5-3T12 is a transformer element for D5 series 22 mm pilot devices. It converts a 480 V control voltage to a 6 V output for powering an incandescent lamp, allowing low-voltage lamp operation in high-voltage industrial control panels.

The Mitsubishi A1SG60 is a blank slot cover dummy module for MELSEC-A series PLC base units. It fills unused slots to protect internal components, reduce exposure to dust or foreign objects, and help maintain system stability when vacant slots are present.

The Fluke TP88 Rigid Back Probe Pin Set includes two fine-tip, rigid back probe pins designed for use with 2 mm test probes. The red and black insulated pins slide onto compatible probes and allow access between weather pack seals and wires. Tested to 60 V DC.

Fluke Networks VERSIV-TSET Versiv Headphones deliver wired, stereo audio with in-ear comfort for clear, distraction-free listening during testing tasks.

Fluke Networks LIQ-BATTERY lithium-ion replacement battery delivers reliable 3.5 V power for LinkIQ Cable+Network Tester and FI-3000 FiberInspector Pro.

Fluke MDA-550/FPC Motor Drive Analyzer: 4-channel, 500 MHz testing with guided setup, preset profiles, and built-in professional report generation.

Fluke TL76 test lead set with removable IC caps for tight probing, CAT III/IV safety ratings, and 1.4m silicone leads for versatile electrical testing.

The Wohler DC2000 US Pressure Computer Kit brings sharp pressure measurement capability for WC readings, gas line checks, pipe testing, appliance tuning, humidity monitoring, and logged field measurements.

AEMC 2136.77 Replacement Lead Set provides 15 ft test leads designed for use with AEMC DTR Models 8500 and 8510. Supplied as a set of two leads and intended as a replacement for Cat #2118.48.

Eagle Eye BA-WIPE-HD Battery Wipes are supplied in a re-sealable 200-count container and are designed to clean and neutralize corrosion on the surface of batteries.

Cole-Parmer EW-80550-00 is a 100 mm single pen chart recorder designed for process signal monitoring. It supports selectable millivolt and voltage full scale ranges with adjustable chart speeds. Internal zero and span controls allow calibration for recording applications.

Fluke Networks SMC-9-FCAPC/FCAPC is a single-mode fiber optic launch cord designed for FC/APC to FC/APC connections. It features a 9 µm core with a total length of 160 meters (524.93 ft) and is intended for use with network testing devices requiring single-mode fiber connectivity.

The FANUC A03B-0819-C001 ABU10A is a 10-slot horizontal I/O base unit designed for industrial automation systems. Part of the A03B-0819 series, it provides a compact chassis for mounting multiple I/O modules and supports scalable system configuration within control cabinets.

Fluke GEO CABLE-REEL 50M provides a 50-meter earth ground test lead on a compact reel for grounding and earth resistance testing with Fluke GEO instruments, delivering organized cable deployment and reliable field use.

The PROFLO PFRCKU is a 6-inch, two-bolt pipe repair clamp designed for use on 2-inch pipe. It features a 430 stainless steel band, NBR gasket, and plated hardware, supporting a 150 psi pressure rating and a working temperature range from -30°F to 180°F.

Fluke TL80A test lead set delivers flexible silicone leads, fine electronic probes, and banana plug compatibility for accurate low-energy electronic measurements with Fluke and compatible multimeters.

Fluke TP82 insulation piercing probe tips enable non-destructive testing through wire insulation. Designed for 4 mm banana leads, they support precise diagnostics on automotive sensors and wiring without stripping insulation.

Fluke T5-KIT accessory starter kit expands Fluke T5 electrical tester capability with SureGrip test probes, large jaw alligator clips, and a zippered soft carry case for organized field use.

Fluke AC87 bus bar clips provide a secure, hands-free connection to flat bus bars for electrical testing. Designed for heavy-duty use, these right-angle test lead accessories support safe, stable measurements.

Pomona 4408 test lead holder provides durable steel organization for RG 59 and RG 108 cables. Designed for lab and bench use, it keeps test leads secure, visible, and easily accessible.