Search results for: 'goods'

The PLS 3G Z is a self-leveling three-point green laser level designed for fast, accurate plumb layout. It delivers ≤1/8" accuracy at 30 ft and features a pendulum lock for controlled alignment. Includes laser, canvas pouch, and BP5 alkaline battery pack.

The T.A. Systems EL-9060 is a sonic relay board module designed for industrial control applications operating on 24VDC. It is used to translate low-power control signals into higher-power switching actions within industrial automation and machinery control systems.

The SATO RH1731100 is a genuine SEN 5 Cable data transfer cable assembly used inside SATO industrial label printers. This internal electrical component includes an attached micro switch and is designed to connect internal printer mechanisms to the main circuitry in supported M84xxS and M84xxSe series printers.

The Leviton T5015-E is a 15 amp, 125 volt tamper resistant single receptacle designed for commercial and high-use residential applications. It features a grounding configuration, impact-resistant construction, and side or back wiring options for installation flexibility.

The Conair UTB-120S Universal Terminal Box is a centralized electrical connection point used in material loading systems. It operates on 120 VAC and is designed to interface a main loader control panel with multiple receiver or loader drop cables, simplifying system wiring and maintenance.

The Comau 10125260 Safety Relay Board is an industrial automation component used within Comau robotic control systems. It functions as a safety relay module designed to support safety monitoring circuits in industrial robotics applications operating with 24 V DC auxiliary power

The Deublin 1595-040C is a repair kit intended for use with Deublin Model 1005 single-passage rotating unions. It is associated with servicing seals and bearings used in Model 1005 unions operating with air, hydraulic oil, or vacuum in industrial applications. Kit contents are not detailed in the provided data.

The Allen-Bradley 800B-ALB5 is a yellow, square lens cap with diffuser designed for Bulletin 800B 16 mm operator devices. It provides consistent color indication for push buttons and pilot lights in compact control panels and instrumentation applications.

Fluke Networks CIQ-WM CableIQ Wiremap Adapter enables accurate wiremap testing when used with CableIQ testers. Designed for seamless CableIQ compatibility and dependable cable identification.

Fluke GEO CABLE-REEL 25M ground cable reel provides a 25-meter earth lead for extended reach during grounding and electrical testing, supporting reliable field connections with compatible Fluke GEO instruments.

Fluke PLS GR16 is a 16 ft collapsible grade rod with imperial and metric markings, designed for accurate height reference with laser and optical leveling tools in layout and surveying applications.

Killark 380S stamped steel conduit body cover designed for 1-inch trade size conduit bodies. Constructed from stamped steel with stainless steel screws, this UL and CSA approved blank cover is used to close and protect conduit body openings in electrical installations.

The Harold Beck & Sons 11-1373-01 is a 7 Amp fast-acting fuse used for overcurrent protection in Digital Control Module (DCM) circuits. Designed for use within Beck electric actuator systems, this listing includes a quantity of five identical fuses.

The General Electric 8G163WF is a fluorescent lamp ballast labeled for 277-volt operation and F48CW lamp applications. This unit is identified directly from manufacturer carton labeling and is supplied as a single ballast. No additional accessories or documentation are included.

The Honeywell J-KE001 is a serial data cable identified for use within Honeywell TDC 3000 Distributed Control System environments. It is referenced as a communication cable supporting data transfer between system components in DCS and PLC-related installations where the J-KE001 cable is specified.

The Fluke Networks 11294000 Need-L-Lock Crimping Pliers combine a UR/UY/UG crimper, needle-nose pliers, wire stripper, and cutter in a single hand tool. This 6.5-inch forged steel tool features rubber-coated handles for a non-slip grip and integrated cutting and stripping functions.

The Emerson Ovation 5X00070G04 is an analog input module used within the Ovation Distributed Control System. It is designed for millivolt-level signal acquisition and supports selectable ±20 mV, ±50 mV, and ±100 mV input ranges across eight analog input channels.

The Yamatake Honeywell J-MBU00 is a modular base unit designed as a physical mounting and backplane chassis for compatible control or I/O modules. This unit provides slot-based connectivity within a larger industrial automation system. Delivered as the base unit only.

The Yamatake Honeywell J-MBU01 is a base unit backplane used in legacy distributed control systems. It provides a multi-slot platform for installing compatible control and I/O modules within an industrial control cabinet. The unit shown is the backplane only, with no modules installed.

The Bently Nevada 02003984 is a cable extension assembly designed for use within Bently Nevada proximity measurement systems. This assembly provides an intermediate electrical connection between system components using a factory-terminated cable with integrated connectors.

Pomona HB-36-2 patch cord delivers reliable test connections with horizontal stacking banana plugs and durable construction for everyday lab use.

Pomona 1452 adapter enables binding post or banana plug connections to BNC equipment, offering 50 ohm coaxial performance in a compact design.

Pomona 3841 Type N splice adapter maintains signal strength with gold-plated contacts, PTFE dielectric, and durable brass construction.