Search results for: 'maximum'

The Fluke i1010 is an AC/DC current clamp designed for use with digital multimeters. It measures currents from 1 A up to 1000 A DC and up to 600 A AC using a Hall-effect sensor. The clamp outputs 1 mV per amp for direct reading on compatible meters.

Schneider Electric CAD50G7 is a TeSys Deca control relay with five normally open contacts and a 120 VAC 50/60 Hz control coil. Rated up to 690 VAC and 10 A, it supports DIN rail or panel mounting and is designed for industrial control circuit applications.

The Fluke 51-II is a handheld single-input digital thermometer designed for contact temperature measurement using J, K, T, or E type thermocouples. It delivers fast response with laboratory accuracy and features a large backlit dual display, Min/Max/Avg functions, electronic offset, and 60 Hz noise rejection.

Fluke 80PK-10 pipe clamp temperature probe enables fast, repeatable surface measurements on 1.25–2.5 in pipes using a Type-K thermocouple, ideal for superheat and HVAC diagnostics.

Fluke I410 AC/DC current clamp adapter expands digital multimeters to measure 1A–400A AC/DC using Hall-effect sensing with 1mV/A output, enabling safe, non-intrusive current measurements.

Fluke 62 MAX CAL infrared thermometer delivers non-contact temperature measurement with a 10:1 distance-to-spot ratio, IP54 protection, single-laser targeting, and traceable calibration data for dependable industrial diagnostics.

Fluke i17XX-FLEX3000 flexible iFlex current clamp measures up to 3000A AC and connects directly to Fluke 17XX Energy and Power Loggers, delivering accurate high-current measurement in tight spaces.

Banner Engineering IAT210S glass fiber optic sensor cable with diffuse-reflective sensing. Features a right-angle brass sensing end, stainless steel monocoil sheathing, 3.2 mm glass fiber core, and 4.572 m length. Designed for use with a separate fiber optic amplifier.

The Omron MY4Z DC24(S) is a general-purpose miniature power relay with a 4PDT contact configuration and 24 VDC coil. Rated for 5 A switching in four-pole applications, it is designed for sequence control and power switching in industrial control systems.

The Allen-Bradley AK-R2-360P500 Dynamic Brake Resistor is an external medium-duty resistor kit designed for PowerFlex 70 and 700 series drives. It provides 360 ohms of resistance with an 86 watt continuous power rating to dissipate regenerative energy during motor braking.

The MIP LM 3086 EPA3 is a laser-based opacity and dust monitor designed for continuous emissions monitoring in industrial stacks. It uses a single-pass, dual-path laser architecture with an optical reference path to measure opacity, optical density, and calibrated dust concentration values.

Honeywell 380-01873-100 I/O Interface Module enables remote monitoring and control of field devices using RS485 Panel Bus™ communication with 34 configurable I/O points for scalable building automation systems.

Pomona HB-36-0 horizontal stacking banana plug patch cord delivers reliable jumper connections for test and audio devices. Features 3 ft 18 AWG cable with dual male banana plugs for standard banana jacks.

Pomona 2631 BNC Female to Minigator Test Clips breakout cable enables fast signal access from BNC male cables to minigator clips for bench and handheld electronic testing applications.

Fluke 1535 Insulation Resistance Tester delivers 250V–2500V testing with insulation measurements up to 500 GΩ. Designed for industrial and solar environments with CAT IV 600V safety and automatic PI/DAR calculations.

Fluke TI-CAR CHARGER car charger allows convenient 12 V DC charging of compatible Fluke thermal imagers directly from a vehicle power outlet.

Fluke Networks 26200900 Pro3000 Tone Generator uses SmartTone technology to accurately trace and identify copper cable pairs up to 10 miles.

Fluke ii905 with SB140 sound beacon detects compressed gas leaks and verifies vessel integrity using acoustic imaging, with 1 year of Premium Care included.

Fluke GFL-1500 solar ground fault locator pinpoints active PV faults up to 1500V using non-contact signal tracing for faster, safer troubleshooting.

Allen-Bradley 813S-V0WE line voltage monitor relay designed for three-phase systems to detect phase loss, phase reversal, and voltage unbalance, providing automatic protective signaling in motor control circuits.

Fluke 1555 FC insulation tester delivers up to 10 kV testing with data storage, leakage current measurement, and enhanced CAT IV safety.

Fluke FLK-A3000FC KIT Wireless Current Clamp Kit measures up to 400A AC with logging, inrush capture, and Fluke Connect wireless monitoring.

Allen-Bradley 871C-C5A18 inductive proximity sensor delivers reliable non-contact metal detection with a 5 mm sensing range, normally closed output, and AC 2-wire operation for industrial automation applications.