Search results for: 'cables'

Fluke Networks DSX2-ADD-R kit includes Versiv 2 remote and DSX-5000 modules for certified cable testing—Versiv 2 mainframe required.

Fluke Networks singlemode fiber optic cable ensures reliable OTDR testing, LC/LC connectivity, and high-performance network analysis.

EA Technology CS2 CableSniffer delivers decisive underground LV cable fault location by capturing insulation breakdown gases, enabling faster pinpointing, fewer excavations, and confident field diagnostics with real-time ppm detection.

Gripple GS12-10S5-R5-2P seismic restraint kit delivers a ready cable-bracing hardware set with 1/8 in x 10 ft cable, GS12 fasteners, standard end fittings, and retrofit structural eyelets.

The INNO Instrument DC300A Flat Cable Stripper is an aluminum stripping tool designed for 3 × 2 mm flat drop cable, 900 µm coating fiber, and 250 µm coating fiber. It features three side blades and an integrated locating ruler for consistent cleaver length positioning. 

The Fluke MS-POE verifies Ethernet cabling and Power-over-Ethernet in one step. It identifies PoE class, voltage, and pairs while testing cable length, wiremap, and network speed—ideal for installing and troubleshooting PoE devices like IP cameras, phones, and access points.

Fluke Networks MS2-WM: Reliable MicroScanner² wiremap adapter for copper cable testing, detecting faults and ensuring accurate network diagnostics.

Fluke Networks fiber optic patch cable ensures reliable multi-mode SC-SC connectivity, ideal for fast and stable network device connections.

Fluke Networks DSX2-5000 certifies installed copper cabling through the Versiv 2 platform with DSX-5000 measurement modules for structured network testing.

The Fluke Networks DSX-CHA003 DSX Series Coaxial Adapter is designed for use with the DSX-5000 CableAnalyzer to characterize installed coaxial cabling. It supports testing of 50 ohm, 75 ohm, and 93 ohm coaxial cable and enables insertion loss measurements over a frequency range of 5 to 1002 MHz in accordance with applicable test limits.

Introducing the WOHLER Extension Camera Cable with Distance Marking

Introducing the WOHLER 2.6 ft Monitor/Rod Connection Cable

Sauermann P/N 27558 is a USB Cable, type C, for Si-CA 030/130/230. Type C USB cable for charging and communications. 

The Fluke Networks LinkIQ LIQ-KIT-FMC Cable & Network Tester Kit verifies twisted pair and fiber performance up to 10GBASE-T and supports network troubleshooting. It provides frequency-based bandwidth validation, wiremap, distance to fault, IPv4/IPv6 ping, nearest switch diagnostics, and PoE testing, with RJ-45, USB, and SFP connectivity.

Bently Nevada 330930-060-02-00 is a 3300 XL NSv 6.0 m extension cable for proximity transducer systems. One cable assembly is included, as shown.

Fluke Networks singlemode launch cord: 160 m fiber optic cable with SC/APC and LC/UPC connectors for reliable network testing and analysis.

Fluke Networks SMC-9-SCSC: High-speed singlemode fiber optic cable for efficient network testing and troubleshooting. 160m length with SC/SC connectors. Reliable performance.

Fluke 3PHVL-17XX-5M is a 3-phase + neutral voltage test lead cable assembly designed for structured multi-phase measurements, delivering organized lead management and reliable electrical connectivity over a 5 m length.

Allen-Bradley PN-94201 is an industrial fiber optic cable designed for reliable optical signal transmission in automation environments where electrical noise immunity and stable communication are required.

AEMC 2135.93 USB charger cable with wall plug delivers replacement charging support for the AEMC Model 6424 Ground Tester.

Fluke Networks USB interface cable ensures fast, reliable data transfer for DSX CableAnalyzer series with Micro-USB/USB Type A/B connectivity.

Fluke CIQ-COAX Adapter Kit: Includes F, BNC, and RCA connectors for CableIQ testers, ensuring reliable coax verification and connectivity.

Fluke VERSIV2-M Cable Analyzer: High-performance network testing for technicians, ensuring fast and accurate cable certification in the field.

Allen-Bradley 43GR-TBB25SL is a glass fiber optic cable for diffuse sensing applications. It features a bifurcated configuration, threaded axial brass tip, stainless steel flexible conduit sheathing, and a custom 36 in cable length for industrial sensing use.

Fluke Networks multimode fiber optic cable delivers reliable SC to LC connectivity, 50µm core, and 2-meter length for stable network performance.