Search results for: 'with'

The GE Fanuc IC693CHS392G is a 10-slot expansion I/O baseplate for the Series 90-30 PLC platform. It features a 25-pin D-type expansion connector, rack address DIP switch, and supports local I/O expansion up to 50 feet. Designed for use with compatible CPU baseplates.

Fluke FPC3S-II910-1 is a 3-Year Premium Care Standard Plan (No Loaners) for the Fluke ii910 Acoustic Imager. Coverage includes no-charge accidental damage repair, annual calibration or performance testing, expedited calibration and repair, expedited freight, accessory replacement, software updates, and priority technical support.

Fluke FPC1S-MDA-500-1 Premium Care provides one year of service coverage for MDA-500 Series test tools. Coverage includes annual calibration or performance check, repair services with parts and labor, expedited freight, accessory replacement, software updates, and priority technical support. No loaner units included.

The Mitsubishi CP30-BA 1-Pole 5A M-Curve Circuit Protector is a compact DIN-rail-mounted supplementary protector designed for low-capacity control circuits. It features a medium-speed hydraulic-magnetic tripping characteristic, 5 A current rating, and supports AC 250 V or DC 65 V operation in industrial control panels.

The Universal 447-LR-TC-P is a 120V magnetic fluorescent ballast designed to operate two lamps in trigger-start configurations. It supports F20T12, F15T8, and F15T12 lamps and features a low power factor, lag-type circuit. UL and CSA certifications support indoor and Type 1 outdoor use.

Fluke I410 AC/DC current clamp adapter expands digital multimeters to measure 1A–400A AC/DC using Hall-effect sensing with 1mV/A output, enabling safe, non-intrusive current measurements.

Fluke i200 AC current clamp enables accurate 0.5–200A AC measurements using a multimeter. Features 1 mA/A output, banana plug interface, and CAT III 600V safety for electrical testing.

Fluke Networks TRC-SM-VERIFY-MPO16P is a reference-grade single-mode MPO16 verification cord for CertiFiber Max, designed to confirm accurate reference settings when testing pinned MPO16 fiber links.

The Honeywell 621-9938RC is a dual-port Serial I/O Module for the IPC 620/621 Programmable Controller System. It provides redundant serial communication, configurable I/O point allocation, DIP switch configuration, front status LEDs, and supports hot-swappable operation in redundant serial I/O architectures.

Mersen A050F300 Protistor semiconductor fuse delivers ultra-fast aR protection at 500V and 300A, designed to limit let-through energy and protect sensitive power electronics in high-performance drive and converter systems.

The ABB Bailey IMASI02 is an Analog Slave Input module for the Infi 90 Process Management System. It converts analog field signals into digital data for processing by a Multi-Function Processor and interfaces up to fifteen process signals through a single MMU slot.

Fluke Networks NFC-SWABS-1.25MM fiber optic cleaning swabs are designed for LC and MU ports, delivering precise 1.25mm bulkhead cleaning with lint-free material for effective wet or dry connector maintenance.

The Phoenix Contact RAD-ISM-900-XD-BUS is an OMNEX industrial wireless transceiver module operating in the 900 MHz ISM band. It supports bidirectional wireless transmission of digital and analog I/O signals and mounts on a DIN rail with an integrated bus foot for I/O expansion.

The Phoenix Contact 560-3889 is a power distribution interface module used within Emerson Ovation distributed control systems. It functions as a marshalling and power distribution interface between controllers and I/O field devices, supporting structured wiring through screw terminal connections in PLC and DCS panels.

The Bently Nevada 16699-03-05-03 is a velocity seismoprobe vibration sensor used for industrial condition monitoring. It converts mechanical vibration into an electrical signal and is designed for housing-mounted vibration measurement on rotating machinery. The sensor features a metal cylindrical body, stud mounting, and a top-mounted three-screw terminal block for field wiring.

Pomona 1296 BNC male to dual stacking binding post adapter converts BNC test instruments to banana jack connections, supporting stacked binding posts for flexible laboratory and bench testing setups.

The Emerson Fisher-Rosemount KJ4001X1-CA1 is an I/O terminal block used as an interface between field wiring and control system I/O modules. The unit provides 16 numbered terminal positions and is designed for industrial automation installations, including hazardous location environments as indicated on the device label.

The Allen-Bradley 800T-XA2 Series D is a 30 mm industrial control contact block featuring two normally open contacts and an A600 NEMA pilot duty rating. Designed for use with Bulletin 800T operators, it provides screw-terminal connections and base-mount installation for industrial control panels.

Pomona 3788 BNC Female to Minigrabber Test Clip Breakout enables fast signal access from BNC male cables to dual minigrabber clips, delivering secure low-resistance connections for electronic testing and diagnostics.

Pomona 2631 BNC Female to Minigator Test Clips breakout cable enables fast signal access from BNC male cables to minigator clips for bench and handheld electronic testing applications.

Pomona 2630 BNC female to alligator test clip adapter enables fast signal breakout from BNC cables to clip leads. Features 18 AWG PVC wire, gold-plated center contact, and durable molded BNC design.

Fluke 3540 FC KIT enables three-phase power monitoring with wireless cloud streaming, harmonic analysis, and real-time condition monitoring.

Fluke Networks GLD3-DSX-5000QI Gold Support provides 3 years of calibration, repairs, loaner service, and 24/7 technical support for DSX-5000Qi.

Toshiba MG150M2CK1 NPN power transistor module engineered for high-current switching. Designed for motor control and UPS systems, featuring an isolated case and dual-element bipolar architecture.