Search results for: 'Requirements'

Fluke Networks fiber optic cable: dependable singlemode SC/SC 2m cord ensuring stable, high-speed network connectivity for precise testing.

WOHLER 2494 Standard Clamping Cone secures 0.3-inch probes with stainless steel durability for stable, repeatable probe attachment in professional testing workflows.

Wohler 6889 Re-Lining Adapter Kit supports chimney re-lining and flue inspection with compatible Wohler camera systems, helping maintain centered travel and controlled positioning during chimney service work.

Leviton 065-4729-C delivers industrial-grade 15A, 125V locking connection performance with NEMA L5-15R grounding, 2-pole/3-wire wiring, nylon construction, and 18–10 AWG termination support.

Superior Electric SS50 SLO-SYN AC synchronous motor delivers fixed-speed synchronous operation for motion control systems with 120 VAC input, 72 RPM output, and documented SLO-SYN holding torque characteristics.

Tele Controls RM024LD relay delivers reliable 24VDC switching with LED status and diode protection, ideal for RM series industrial control and automation systems.

Eaton H1116/T1114 thermal overload heaters deliver reliable Class 20 motor protection for Citation Series and Freedom NEMA starters, ensuring safe, accurate trip performance.

Specifically for areas that require small, fine application work Lightweight and triangle-shaped plastic handle Heats up fast but requires less wattage Tips easy to change Safety stand included Optional replacement tips for various applications Parameter Value Voltage 110V-120V, 60Hz Consumption 20W Max. Temperature 770˚F±10% Heater Ceramic Heater Accessories Safety stand Tip Size Cone Shape, 4mm in diameter, Length: 19mm Power Cord A TYPE, SPT-1 Length: 5 ft Overall Length 6.6 in.

HARTING 09150006206 silver-plated Han D female crimp contact with AWG 14 capability delivers reliable 10 A performance and low ≤3 mΩ resistance for industrial connector applications.

Single Fluke DTX-MFM2 multimode fiber module for 850/1300 nm dual-fiber loss and length testing. Supports SC output, interchangeable adapters, VFL, and FindFiber functions.

The ultimate precision cutting tool designed to meet the rigorous demands of professionals across a variety of industries. Crafted with utmost attention to detail, these micro cutters are perfect for those who require accurate cutting and emulsification of raw materials. With their sleek and compact design, they are a must-have addition to any toolkit. ∅ 1.2mm 16AWG, Total Length: 125 mm

Product Overview

Leviton 16342-W Decora Plus duplex receptacle delivers a 20A, 125V NEMA 5-20R wiring solution with side-wire termination, self-grounding design, and white smooth-face Decora styling.

ABB 1SVR427032R0000 switch mode power supply delivers 24 VDC output at 2.5 A from a 100–240 VAC input, with adjustable output voltage from 24–28 VDC and 60 W max load capacity for control and industrial power applications.

Square D 2510KG1 manual switch delivers reliable 30A control for single-phase systems with a 2-pole toggle design and non-reversing operation in a compact NEMA 1 enclosure.

INNO Instrument PAC-1007 small alligator adapter pair with safety connector, rated 300V CAT II 15A, in red and black.

INNO Instrument PAC-1006 large alligator clip adapter set with red and black insulated clips, safety connector interface, and 600V CAT IV 19A rating.

Fisher CCLAMP-5-MF inductive clamp for TW9000 enables non-contact signal transfer. Designed for multi-frequency utility locators, it induces tracing signals onto exposed conductors up to 5 inches.

Siemens 771-8STF1 current-to-pneumatic (I/P) transducer converts a DC mA input to a proportional pneumatic output. Configuration: 4–20 mA input, 3–27 psig output, standard output capacity, terminal strip, intrinsically safe approval.

The General Electric CR104PLT43 is a 30.5mm push-to-test indicator light designed for 240V AC industrial automation systems. Part of the GE CR104P series, it utilizes a resistor power supply and supports machine-tool and control panel applications where manual lamp verification is required.

The UN1CO Tripod is a dedicated mounting stand designed to support the UN1CO Mobile tray system. It provides an elevated and stable working platform for fiber splicing and FTTH field applications where ladder or pole mounting is not required.

The Emerson Fisher-Rosemount KJ4001X1-CA1 is an I/O terminal block used as an interface between field wiring and control system I/O modules. The unit provides 16 numbered terminal positions and is designed for industrial automation installations, including hazardous location environments as indicated on the device label.

Fluke Networks SMC-9-SCST launch cable delivers 160m singlemode fiber for accurate OTDR testing, stable network connectivity, and compatibility with OptiFiber units.

Fluke Networks fiber optic launch cable delivers reliable 62.5 µm multimode performance with 105m length, SC to LC connectors, ideal for network testing.

Wöhler TF5 Flue Gas Temperature Probe delivers Type K temperature measurement for flue gas testing with compatible Wöhler analyzers and meters, supporting readings up to 1,652 °F.