Search results for: 'loaded'

New AEMC 603 TRMS Clamp-On Meter, 3000A AC/DC with True InRush®, voltage, resistance, frequency, and temperature measurement. CAT IV 1000V rated, rugged IP54 housing.

The Hydrajaws standard digital gauge provides many advantages over the standard analogue gauge including more accurate and clearer results.

The Hydrajaws Safety Post and Foundation Push Tester is designed to apply hydraulic pressure on a VRS safety post. This pressure is applied in increments through the use of a hand pump and its attached gauge. The distance between a set vertical datum and the safety post is then recorded at each stage.

AEMC PEL 115 Power & Energy Logger provides field-ready power and energy logging for audits, diagnostics, and maintenance with rugged design and flexible data access.

Eaton PKZM0-6,3/NHI11 motor-protective circuit breaker delivers adjustable 4-6.3 A thermomagnetic motor protection, screw-terminal wiring, and compact panel-ready installation for motor control applications.

TDK-Lambda NNS30-15 linear AC/DC power supply with 15V DC output at 3.4A and 51W max power. NN Series unit with selectable AC input ranges, low ripple, remote sense, remote programming, and convection cooling.

Eagle Eye DLV-Max Kit combines the DLV-Pro and SG-Ultra Max for battery voltage, specific gravity, and temperature testing with Winmeter 5.1 analysis software.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

The Pro’sKit 3 5/6-digit (5999 count) True-RMS flexible clamp meter delivers accurate AC current, resistance, and frequency measurements. Its flexible coil allows easy access around large conductors, while smart auto-ranging ensures precise, reliable readings in the field.

Microprocessor controlled Large LCD display with shuffle knob design Alumina ceramic heating element for fast heat recovery 3 data memories to save commonly used temperatures USB 5V/1A power output Auto sleep, wake, and power-off functions Input Voltage AC 110~120V 60Hz Control System Microprocessor-controlled Power Consumption 60W Display LCD 73mmX40mm, Backlight Temperature Range 200~480°C / 392°F~896°F Temperature Calibration 100~699°C (212~1290°F), Adjustable Temperature Stability ±2°C/±36°F (no load) Heating Element Alumina ceramic Sleep Mode OFF/1-240min adjustable Output Voltage 24VAC Temperature of Sleep Mode 200°C/392°F USB Port Output DC 5V/1A Memory 3 sets Tip-to-Ground Resistance/Potential ≤2Ω/≤2mV Size 7.1 x 5.9 x 4.2 inches Weight 4.6 lbs Certificate TUV, RoHS

List of Tools Tool Name Tool Name Reverse-action tweezer Fine-tip straight tweezer Brush 7-in-1 crimping tool IC extractor PLCC extractor Screwdriver handle Pro-Soft screwdriver 5.0 x 75mm Pro-Soft screwdriver #1 x 75mm Pro-Soft screwdriver 3/16" Wrist strap (10') Utility knife (3 blades, self-loading) Flashlight 7-piece folding-type Allen key set 3-prong holder Adjustable wrench (8") Mini hammer set (including 6 parts) 5-piece needle file set Long-nose pliers (5.3") Diagonal cutting pliers (4.3") Lineman's pliers (8.2") Flat-nose pliers (5.3") Bent-nose pliers (5.1") 6-piece electronic screwdriver set Desoldering pump Quick-heat ceramic soldering iron (110V) Solder core (63%, SN) 3-piece soldering aid tools Heat sink Double-end blade (6.8", 4mm/T6) Double-end blade (6.8", #1/#2) Double-end blade (6.8", 6mm/T8) Double-end blade (6.8", T10/T15) Extension blade (6.8") Heavy-duty zipper bag