Search results for: 'mounted'

The Allen-Bradley 700-HK36A1 is a Bulletin 700-HK slim line plug-in relay with a 120V AC coil and SPDT contact configuration. It supports up to 16 A resistive loads and is designed for high-density industrial control and interposing applications.

Fluke Networks NFA-CFM-SC is a duplex SC input adapter for CertiFiber Max optical loss test sets, enabling accurate power and loss testing while protecting the instrument port with a field-replaceable design.

The Mitsubishi FR-A7N-ETH is an internal Ethernet communication option card for Mitsubishi 700-series adjustable speed drives. It provides multiprotocol Ethernet connectivity for industrial automation networks and supports configuration and monitoring through an embedded web server interface.

The Allen-Bradley 800B-EAB is a 16 mm maintained square push button operator designed for light industrial and instrumentation applications. It features corrosion-proof plastic construction and gold-plated snap-action contact compatibility for reliable low-voltage switching when paired with Bulletin 800B contact blocks.

Fluke T6-KIT accessory starter kit enhances Fluke T6 Electrical Tester usability with an OEM holster, AC285 alligator clips, and TPAK hanging kit for secure, hands-free electrical testing.

The Littelfuse L70S040 is a 40 A, 700 V high-speed semiconductor fuse designed for current-limiting protection of sensitive power electronics. It features a round melamine body with silver-plated copper terminals and is rated for both AC and DC systems.

Amprobe 5XP-A compact digital multimeter with VolTect™ detection, data hold, and Magne-Grip™ holster for hands-free electrical troubleshooting.

The Wöhler Viper S 8872 delivers flexible 50 ft reach for cleaning small chimneys, pipes, and ventilation ducts with a 0.18 in GRP rod, length marking, M5 stainless steel end pieces, and protection tube.

Fluke 381 clamp meter: Remote display and iFlex probe enable safe AC/DC current, voltage, resistance and frequency measurements in tight, noisy panels.

Leviton 16342-W Decora Plus duplex receptacle delivers a 20A, 125V NEMA 5-20R wiring solution with side-wire termination, self-grounding design, and white smooth-face Decora styling.

Eagle Eye HGD-4000 hydrogen gas detector with intrinsically safe design, AC power input (85–265 VAC), dual internal alarm relays, and LED status indication.

Eagle Eye HGD-2000-C3 Control Box with 3 Sensors Compatible with HGD-2000 for monitoring hydrogen gas buildup in battery rooms and similar facilities. Features dual relays, audible alarm, and AC power input.

Fisher CCLAMP-5-MF inductive clamp for TW9000 enables non-contact signal transfer. Designed for multi-frequency utility locators, it induces tracing signals onto exposed conductors up to 5 inches.

The ABB OHDI-01 is a 115/230 VAC digital input module designed for use with ABB ACS550, ACH550, and ACS800 drives. It converts high-voltage digital input signals to 24 VDC drive inputs and supports up to six 115 VAC inputs or three 230 VAC inputs.

The Emerson KJ2006X1-BK1 Virtual I/O Module (VIM) is designed for DeltaV Safety Instrumented Systems (SIS) with CHARM I/O technology. It simulates up to 96 individually addressable I/O channels for offline system development, logic validation, commissioning preparation, and operator training without physical field wiring.

The Fluke CV301 is a 3 in (75 mm) ClirVu® infrared inspection window with a security key door latch. Designed for permanent installation on electrical enclosures, it enables infrared inspections without opening panel doors while maintaining enclosure ratings and safety compliance.

The Opto 22 AD6T is a single-channel, optically isolated analog input module designed for 0–5 VDC signals. Built in Opto 22 G1 (Standard) form factor, it provides 12-bit resolution, 4,000 VRMS isolation, and compatibility with Standard analog I/O racks for industrial control systems.

The Allen-Bradley AK-R2-360P500 Dynamic Brake Resistor is an external medium-duty resistor kit designed for PowerFlex 70 and 700 series drives. It provides 360 ohms of resistance with an 86 watt continuous power rating to dissipate regenerative energy during motor braking.

Honeywell 380-01873-100 I/O Interface Module enables remote monitoring and control of field devices using RS485 Panel Bus™ communication with 34 configurable I/O points for scalable building automation systems.

Omega CN78030 delivers precise PID temperature and process control in a compact 1/16 DIN format, featuring relay output, universal sensor input, RS485 communication, and advanced autotune and fuzzy logic control.

The ABB Bailey IMFCS01 is an intelligent Frequency Counter Slave Module for INFI 90 and Net 90 DCS platforms. It processes high-speed pulse inputs from field sensors and communicates frequency and period data to a Multi-Function Processor via the slave expander bus for speed monitoring and control.

The Emerson Fisher-Rosemount KJ4001X1-CA1 is an I/O terminal block used as an interface between field wiring and control system I/O modules. The unit provides 16 numbered terminal positions and is designed for industrial automation installations, including hazardous location environments as indicated on the device label.

Fluke LENS/4XTELE2 4X Telephoto IR Smart Lens magnifies distant targets for safer thermal inspections without recalibration on compatible Fluke cameras.