Search results for: 'forow'

Fluke 750P03 differential pressure module delivers precise 0–5 PSI calibration and measurement when paired with compatible Fluke calibrators, offering digital accuracy, temperature compensation, and stable reference performance.

Johnson Controls P10BC-7C low pressure control, SPDT, 1-stage, 3 to 20 psi range, 12 psig factory setting, 2 psi switch differential, with barbed fitting.

Fluke I17XX-FLEX6000/3PK iFlex flexible current clamp kit includes three 36 in flexible Rogowski-style probes rated to 6000 A AC. Designed to connect directly to Fluke 173X Energy or Power Loggers, the probes provide expanded AC current measurement capability without external scaling factors.

The AEG SH 05.31 is a 4-pole auxiliary contactor from the SH 05 series with a 24V DC coil. It features a 3NO + 1NC contact configuration (31E) and screw terminals. Rated per AC-15 and DC-13 utilization categories as specified in the AEG 2014 extract catalogue.

Yamatake Honeywell 8240-7444-001 ENH Relay Terminal Panel. This panel provides relay termination using multiple installed plug-in relays and numbered screw terminals on a single PCB assembly. Identified by manufacturer silkscreen and assembly number only.

Elcometer 331 TH Deep Cover Concrete Covermeter & Half Cell Gauge for reinforced concrete surveys requiring rebar location, cover depth measurement, bar sizing, and TH linear/grid data logging.

INNO Instrument PAC-1007 small alligator adapter pair with safety connector, rated 300V CAT II 15A, in red and black.

Siemens 771-8STF1 current-to-pneumatic (I/P) transducer converts a DC mA input to a proportional pneumatic output. Configuration: 4–20 mA input, 3–27 psig output, standard output capacity, terminal strip, intrinsically safe approval.

The Fluke Networks LinkIQ LIQ-KIT-FMC Cable & Network Tester Kit verifies twisted pair and fiber performance up to 10GBASE-T and supports network troubleshooting. It provides frequency-based bandwidth validation, wiremap, distance to fault, IPv4/IPv6 ping, nearest switch diagnostics, and PoE testing, with RJ-45, USB, and SFP connectivity.

The Fluke CO-220 is a handheld carbon monoxide meter designed to detect and measure CO concentrations from 0 to 1000 ppm. It uses a stabilized electrochemical, gas-specific sensor and provides both numeric LCD readings and an audible beeper response. Features include MAX Hold, automatic backlight, sensor self-test, and automatic power-off.

Phoenix Contact QUINT-DIODE/12-24DC/2X20/1X40 is a DIN-rail mounted redundancy diode module for 12–24 V DC systems. It decouples parallel power supplies to increase system availability, supporting 2×20 A redundancy or 1×40 A increasing power operation.

Fluke FEV150 BASIC EV charging station analyzer tests safety and performance of AC chargers with guided workflows and control pilot simulation.

The Fluke LIQ-DUO-KIT-6PK contains six LinkIQ Duo tester kits, each capable of 10 Gb/s cable testing, network switch diagnostics, PoE verification, and Wi-Fi analysis. This bundle is suited for larger technician teams and multi-site deployments.

Eaton DILM12-10 XTCE012B10A XT IEC contactor provides 12A three-pole full-voltage non-reversing control with 110–120 Vac coil, 1 NO contact configuration, and screw terminals.

The PLS 6R RBP KIT is a self-leveling cross line and point red laser level designed for plumb, level, and square layout applications. It provides 180° horizontal and 130° vertical fan angles with ≤1/8 in accuracy at 30 ft. This kit includes the RBP5 rechargeable Li-ion battery pack, alkaline battery pack, floor stand, magnetic L-bracket, UB9 wall/ceiling bracket, and reflective target.

The Honeywell 621-9939 Serial Link Module is a communication interface for Honeywell Series 9000 and IPC 620 control systems. It manages serial I/O data exchange between the main processor and distributed serial devices using dual asynchronous channels and RS485 connectivity.