Search results for: 'optical'

Application: Fiber Optic and Coaxial SMA/SMB/sFR Connectors SC/ST/FC

The Fluke CV301 is a 3 in (75 mm) ClirVu® infrared inspection window with a security key door latch. Designed for permanent installation on electrical enclosures, it enables infrared inspections without opening panel doors while maintaining enclosure ratings and safety compliance.

Fluke Networks SMC-9-SCST launch cable delivers 160m singlemode fiber for accurate OTDR testing, stable network connectivity, and compatibility with OptiFiber units.

The Fluke Networks FI2-7300 is a USB-C FiberInspector Ultra probe that delivers high-resolution end-face imaging and automated IEC pass/fail analysis when used with Versiv. It supports quick inspection of single-fiber connectors in enterprise and data-center fiber systems.

The Fluke Networks FI2-7000-MPO is an MPO-optimized FiberInspector Ultra camera that provides automated analysis of MPO-12/MPO-24 end-faces, fast pass/fail results and high-resolution imaging for data-center and enterprise fiber-inspection workflows.

The Fluke Networks FI2-7300 DC KIT-NW includes the FI-3000 FiberInspector Ultra camera (non-wireless), Versiv mainframe, MPO and single-fiber adapters, QuickClean tools, FiberLert detector, VFL and accessories, providing a complete fiber inspection and cleaning solution for data-center environments.

Westinghouse Ovation 1C31179G02 Remote I/O MAU module for distributed control system remote I/O communication and field device integration.

Eagle Eye Power Solutions SG-500 portable digital hydrometer for specific gravity measurement in battery fluids, non-datalogging, with automatic temperature compensation and 1.000-1.405 range.

The INNO Instrument UN1COLK UN1CO Ladder Mount Work Platform is an ABS workstation designed for secure positioning on ladder rungs during fiber splicing operations. It provides a stable surface for INNO View series fusion splicers and common industry cleavers in elevated or confined environments.

The INNO B-80 is a 16-position replacement blade designed for INNO fiber cleavers including V7, V7+, V10, V11, V12, V17, VF-15, VF-15H, and VF-78 models. Rated for up to 48,000 cleaves, the B-80 replaces the B-77 blade and supports consistent fiber cleaving in installation and maintenance environments.

The Fluke CV300 is a 75 mm ClirVu® infrared window with a hand turn door latch, designed to improve electrical inspection safety. It enables thermal inspections without opening energized panels and supports fast single-hole installation while maintaining enclosure ratings.

The FI-3000-NW FiberInspector Pro is a high-efficiency MPO and single-fiber inspection camera with Live View of full trunk to individual end-faces, autofocus/auto-centering, automated PASS/FAIL in seconds (<2 s per fiber), USB interface with the Versiv system, and WiFi disabled for secure facilities.

Westinghouse 1C31234G31 Ovation Contact Input Module delivers 16-channel discrete signal monitoring for Ovation DCS architectures, supporting contact status acquisition for plant control, interlocks, and process visibility.

Allen-Bradley PHOTOSWITCH Series 9000 transmitted beam receiver sensor (42GRR-9003-QD, Series A) with 70–264V AC/DC operation, isolated N.O. solid-state (MOSFET) output, 4-pin AC Micro quick-disconnect, and IR 880 nm optics.

The Fluke Networks FI2-7300 DC KIT bundles the FI-3000 FiberInspector Ultra camera with a Versiv mainframe, MPO and single-fiber adapters, cleaning tools, visible fault locator, fiber detector, and accessory kit — enabling complete fiber end-face inspection and detection in data-center environments.

The AEMC 6471 Ground Resistance Tester Kit 500ft comes with a rechargeable battery, DataView software, and versatile 2- to 4-point earth resistance measurement.

Streamline fiber splicing with the UCL Swift KF4A-HDC—5-in-1 functionality for stripping, cleaning, cleaving, splicing, and protecting. Enjoy FSOC compatibility, scratch-free thermal stripping, and easy operation even in tight spaces. Choose your kit and get started—contact us today!

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

AEMC 6471 Digital Ground Resistance Tester 300ft Kit offers accurate earth resistance and soil resistivity testing with auto-ranging and rechargeable battery.

The Fluke Networks FI-525 FiberInspector Micro combines a high-resolution handheld inspection scope with autofocus, built-in PortBright illumination for dark panels, and a full fiber-end-face cleaning kit—ideal for single-mode and multi-mode fiber verification and maintenance.