Search results for: 'timed'

EA Technology CS2 CableSniffer delivers decisive underground LV cable fault location by capturing insulation breakdown gases, enabling faster pinpointing, fewer excavations, and confident field diagnostics with real-time ppm detection.

Eagle Eye DLV-Ultra battery testing kit with DLV-Pro voltmeter and SG-Ultra hydrometer for measuring voltage, specific gravity, temperature, and discharge performance.

The Struthers-Dunn W88AHPX-36 is a hermetically sealed 3PDT plug-in relay from the 88HP Series, rated 10A and configured for 120VAC operation. It features an 11-pin octal base and a sealed gray metal enclosure designed to prevent contamination and corrosion.

The INNO Instrument DC300A Flat Cable Stripper is an aluminum stripping tool designed for 3 × 2 mm flat drop cable, 900 µm coating fiber, and 250 µm coating fiber. It features three side blades and an integrated locating ruler for consistent cleaver length positioning. 

The Opto 22 AD6T is a single-channel, optically isolated analog input module designed for 0–5 VDC signals. Built in Opto 22 G1 (Standard) form factor, it provides 12-bit resolution, 4,000 VRMS isolation, and compatibility with Standard analog I/O racks for industrial control systems.

Fluke 190-204-III is a 4-channel portable ScopeMeter oscilloscope with 200 MHz bandwidth, isolated inputs, WiFi and USB connectivity, built for high-voltage industrial signal troubleshooting.

Fluke 707 Loop Calibrator delivers fast one-handed loop checks with 0.015% mA accuracy, Quick Click control, and simultaneous mA and % display.

Fluke 190-502-III ScopeMeter delivers 500 MHz bandwidth, 5 GS/s sampling, CAT IV safety, and portable oscilloscope performance for industrial troubleshooting.

Allen-Bradley 200-EX640Z1 instantaneous control relay with a 115–125VDC coil, designed for reliable multi-pole switching. Features 6 normally open and 4 normally closed contacts for industrial control logic.

Fluke FLK-A3000FC KIT Wireless Current Clamp Kit measures up to 400A AC with logging, inrush capture, and Fluke Connect wireless monitoring.

Fluke FLK-FEV150/TY1 EV Charging Station Analyzer enables fast, safe AC EVSE testing with Type 1 connector, auto control pilot simulation, and guided workflows.

Fluke 717 5000G pressure calibrator provides accurate 0–5000 psi gauge pressure and mA measurement for field calibration of pressure instruments.

Fluke 718EX 300 intrinsically safe pressure calibrator delivers built-in pump operation, 0.05% accuracy, and ATEX compliance for hazardous areas.

Fluke NORMA 6004 portable power analyzer delivers precise four-channel power measurements with 0.1% accuracy and wide 500kHz bandwidth for field and lab use.

Fluke TC01B iSee Mobile Thermal Camera delivers 256 x 192 resolution, 25 Hz video, and up to 550°C thermal measurement for fast iOS inspections.

Fluke II915-SB140 package detects gas leaks, partial discharge, and vessel leakage using acoustic imaging and a 40 kHz sound beacon for fast pinpointing.

Fluke VR1710 records voltage trends, dropouts, transients, flicker, and harmonics with simple plug-in operation, providing fast diagnostics of single-phase power issues.

Fluke Networks singlemode 9µm TRC cable ensures precise OTDR connectivity with SC/APC to SC/UPC ends, offering stable and efficient fiber testing.

Fluke Networks OptiFiber Pro HDR OTDR: Enterprise-ready singlemode fiber-optic tester with HDR range, macrobend detection, and advanced PON testing capability.

Fluke Networks CertiFiber Pro OLTS: Fast, accurate fiber certification with Wi-Fi connectivity, LCD display, and dual-band optical testing for professionals.

Fluke Networks FQM-100-M: QuickMap fiber locator detects breaks, distance, and power loss for multimode fiber and network troubleshooting.

Amprobe SM-20A: Digital sound meter with A/C weighting, LCD display, internal memory, and USB connectivity for precise acoustic analysis and compliance testing.

Fluke OFP2-CFP-QI Combination Kit – Complete fiber certification solution combining OptiFiber Pro OTDR and CertiFiber Pro OLTS for Tier-1 and Tier-2 testing. Includes Quad (850/1300/1310/1550 nm) modules and FiberInspector camera for end-face analysis.

Fluke MFMULTIMODESOURCE MultiFiber Pro Multimode Source – Light source module for MPO fiber testing. Provides 850 nm output for use with the MultiFiber Pro Optical Power Meter to measure loss, polarity, and continuity on multimode MPO trunks.

Fluke MicroScanner2 verifies voice, data, and video cabling with PoE detection, fault detection, intuitive display, and built-in RJ11, RJ45, and coax test ports.