Search results for: 'power'

Westinghouse Emerson 5X00226G02 Ovation I/O Interface Module delivers rack-mounted digital signal interfacing for Ovation DCS platforms, supporting controller communication with field-connected sensors and actuators in industrial control environments.

INNO Instrument PAC-1002 BNC conversion adapter for safety BNC to banana connection, rated 600V CAT III and listed as an accessory for the SPAW7000 power analysis wavecorder.

Eagle Eye DLV-Pro Data Logging Voltmeter for recording, viewing, and analyzing cell voltages from 0-20 VDC with on-site statistical, graphical, and discharge test analysis.

The Emerson KL2101X1-BA1 CHARM I/O Card (CIOC) is a DeltaV™ Electronic Marshalling subsystem component designed for industrial automation environments. It supports hazardous area installations and operates within -40 °C to +70 °C ambient conditions per manufacturer documentation.

The Fluke i400s-EL-3PK AC Current Clamp 3 Pack extends the current measurement range of digital multimeters, power quality analyzers, and portable oscilloscopes. It supports measurements up to 400 A with selectable 40 A and 400 A ranges and 10 mV/A or 1 mV/A output. Rated CAT IV 600 V / CAT III 1000 V.

The Fluke FLK-393FC-PVLEAD Clamp Meter Bundle includes the 393 FC CAT III 1500 V True-RMS clamp meter with iFlex probe and Pomona PVLEAD1 and PVLEAD3 solar PV test lead sets. It measures up to 1500 V DC, 1000 V AC, and 999.9 A AC/DC, with up to 2500 A using the iFlex probe.

Fluke FLK2AC/90-1000V5PK VoltAlert non-contact voltage detector 5-pack senses 90–1000V AC through insulation, featuring always-on operation, battery check, and CAT IV 1000V safety rating.

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

Fluke 717 15G Pressure Calibrator delivers precise -12 to 15 psi measurements with 0.05% accuracy, mA measurement, and compact field-ready design.

The Fluke Networks MT-8200-63A IntelliTone Pro 200 Probe combines digital and analog toning to trace and locate copper cables on active or inactive networks. It features visual LED indicators, RJ11/RJ45 adapter cables, and automatic shut-off for efficient field use.

The Rigaku KT-100 is a handheld LIBS analyzer designed for rapid alloy identification and elemental analysis of industrial metals. This configuration includes permanent, transferable calibration matrices covering stainless steels, low alloy steels, aluminum grades, titanium, cobalt, nickel, and copper.

Adam Equipment Core CQT 5000: Reliable, stackable compact balance for precision weighing. Durable, easy to use, and perfect for labs or classrooms.

The Adam Equipment BKT 165a Label Printing Scale is built to handle demanding tasks with precision. Features a robust design and versatile label printing in multiple languages.

2-5 Mins quick heat up time 1.5 hour operation time Cordless design to work anywhere Ceramic heater provides stable temperature Drip control prevents unwanted glue on project Status indicator light Convenient USB charging Consumption: 8W Flow Rate: 3g per min Preheating Time: 2 - 5 min Input Voltage: 5V Melting Temperature: 266°F Indicator Light: Blue (In Use) / Green (Fully Charged) / Red (Charging) Glue Sticks: Ø7mm (not included) Charging Time: 200 minutes Operating Time: 90 minutes Power Source: 3.6V Li-ion Battery (2000mAh)

The Wöhler Threaded Brush, Stainless Steel, Crimped is a durable cleaning brush designed for professional chimney, vent, and pipe cleaning. With its M10 thread and crimped stainless steel bristles, it offers a strong balance of flexibility, surface contact, and scrubbing performance for removing soot, residue, and stubborn buildup.

Leviton 3331-C delivers a durable 30A industrial locking plug with non-NEMA 3-wire design, solid brass blades, and tough nylon housing for secure equipment power.

Effortlessly detect live fiber signals with the AFL OFI-400. Precision, low insertion loss, and easy-to-use design for accurate fiber testing. Reliable and portable

Microprocessor controlled Large LCD display with shuffle knob design Alumina ceramic heating element for fast heat recovery 3 data memories to save commonly used temperatures USB 5V/1A power output Auto sleep, wake, and power-off functions Input Voltage AC 110~120V 60Hz Control System Microprocessor-controlled Power Consumption 60W Display LCD 73mmX40mm, Backlight Temperature Range 200~480°C / 392°F~896°F Temperature Calibration 100~699°C (212~1290°F), Adjustable Temperature Stability ±2°C/±36°F (no load) Heating Element Alumina ceramic Sleep Mode OFF/1-240min adjustable Output Voltage 24VAC Temperature of Sleep Mode 200°C/392°F USB Port Output DC 5V/1A Memory 3 sets Tip-to-Ground Resistance/Potential ≤2Ω/≤2mV Size 7.1 x 5.9 x 4.2 inches Weight 4.6 lbs Certificate TUV, RoHS

Portable, durable, and easy to use Supports 2.5mm universal connectors (for FC/SC/ST) Dust-proof & crash-proof cap design for laser head Wavelength 650 nm±10 nm Output Power 1 mW Laser CLASS II Tested fiber length 3-5 km Power (batteries) AA (1.5 V) x 2 Connector 2.5mm universal connector for FC, ST and SC OAL 7 in. Operating Temperature -10~55°C Storage Temperature -10~70°C Optional Accessory LC 1.25mm adaptor(5MT-7601-LC)

Fluke BC-7240 Battery Charger: Efficiently powers Fluke 7X calibrators with proprietary battery support, ensuring reliable operation every time.