Search results for: 'transviz'

Fluke 435-II power quality and energy analyzer for Class A three-phase testing, with PowerWave capture, transient analysis, harmonics, flicker, mains signaling, energy loss measurement, and power distribution troubleshooting.

Moore Industries IPT2 current-to-pressure transmitter converts a 4-20 mA signal into a proportional 6-30 psig pneumatic output for valves, dampers, and pneumatic actuators in process control systems.

Opto 22 IAC5 AC input module provides rugged, optically isolated voltage and switch status sensing for G1 I/O racks in industrial control systems.

Niton XL2 Precious: Your Handheld Solution for Accurate Precious Metal Analysis  Confidently buy, sell, and verify the authenticity of precious metals with the Niton XL2 Precious, a handheld XRF analyzer designed for fast, accurate, and non-destructive testing. 

Olympus EPOCH 4 Ultrasonic Flaw Detector: Precision for Demanding Inspections

WOHLER Protective Rod Tube for Large Vipers - Safeguarding Your Cleaning Investments!

Introducing the OWON HDS2061M-N Handheld Digital Oscilloscope – Your Portable Powerhouse of Precision.

3 5/6 digits 5999 counts 0.5% best accuracy Dual display with analog bargraph Auto/Manual ranging USB data upload Measurement Range DC Voltage (DCV) 600m/6/60/600V ±(0.5%+4d), 1000V ±(1.0%+6d) AC Voltage (ACV) 6/60/600V ±(0.8%+10d), 750V ±(1.0%+10d) DC Current (DCA) 600μ/6000μA ±(1.0%+10d), 60m/600mA ±(1.0%+10d), 6/10A ±(1.2%+10d) AC Current (ACA) 600μ/6000μA ±(1.5%+10d), 60m/600mA ±(1.5%+10d), 6/10A ±(2.0%+15d) Resistance 600Ω ±(0.8%+5d), 6k/60k/600k/6MΩ ±(0.8%+4d), 60MΩ ±(1.2%+10d) Frequency 100/1000Hz ±(0.5%+4d), 10k/100kHz ±(0.5%+4d), 1M/30MHz ±(0.5%+4d) Capacitance 40nF±(5%+30d), 400n/4μ/40μF±(3.5%+8d) 200μF±(5.0%+10d) Temperature -20~400˚C(0~750˚F) ±(1.0%+5d), 400~1000˚C(750~1832˚F) ±(1.5%+15d) Continuity with Buzzer Yes Diode Test Yes Transistor Test Yes Power Source AAA(1.5V)×2pcs (Not included)

Olympus Innov-X DELTA Classic DC-2000 handheld XRF analyzer with Alloy mode for non-destructive elemental analysis, alloy identification, and field-based material verification using portable X-ray fluorescence technology.

Used Sonatest CDA2525270T, 2.5 MHz 1" twin element compression wave ultrasonic transducer with top exit for reliable thickness surveys and flaw detection in steel, pipelines, and tanks. Compatible with Sonatest Wave, Sitescan D-50, and Masterscan D-70. Order from Cartoli or call 1-833-322-7865.

Used Sonatest PDED50505, 5 MHz 1/2" twin element compression wave ultrasonic transducer for reliable flaw detection and thickness gauging on corroded or coated materials. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70. Order from Cartoli or call 1-833-322-7865.

Amperite 115C60 thermal time delay relay delivers fixed 60-second Delay on Break control with 115V AC/DC input, SPST-NC contacts, and a 3A resistive rating.

Action Instruments AP9046 DC output power supply with 120VAC input, 24VDC regulated output, plug-in 8-pin design, and current loop power supply capability for two-wire transmission applications.

The PLS 5G is a self-leveling five-point green laser level designed for plumb, level, and square point layout. It delivers ≤1/8 in accuracy at 30 ft (≤3 mm at 10 m) and features a pendulum lock for transport and tilt mode operation. With IP54 protection and a Class 2 green beam (525 nm), the PLS 5G supports interior layout applications up to 100 ft working range.

Fluke FLK-729 30G automatic pressure calibrator simplifies pressure tests with auto pumping, mA measurement, HART communication, and onboard documentation tools.

Amprobe CT235A AC/DC clamp transforms high current up to 1000A into safe millivolt signals for precise measurements with meters and data loggers.

The Sonatest AWS 45° Snail Calibration Wedge is certified pre-owned and fully function-tested. Designed for shear wave ultrasonic weld inspection to AWS standards, it ensures accurate angle-beam performance. Contact Cartoli today via live chat or 1-833-322-7865.

AEMC C.A 6117 Installation Tester Kit with RCD, loop, insulation & ground tests. Ideal for industrial environments with USB & DataView® software.