Search results for: 'periodo'

Fluke 1777 Power Analyzer: Handheld three-phase voltage and power quality measurements with automatic logging and high-speed transient capture.

Fluke Networks Fiber Optic Network Cable: 3.28 ft single-mode breakout cord with MPO/APC to 12 LC/APC connectors for secure, fast network access.

Fluke Networks singlemode fiber optic cable ensures reliable OTDR testing, LC/LC connectivity, and high-performance network analysis.

Fluke Networks OptiFiber Pro HDR Module: High dynamic range fiber testing with automated macrobend detection for enterprise and OSP networks.

Fluke Wireless General Maintenance System: Fast, safe, and easy electrical panel testing with multi-module AC voltage and current measurements.

Fluke Networks DSX-COAX adapters: Set of 2 for DSX-5000, supports 50, 75, 93 ohm coaxial cable testing with precise length-scaled limits.

Fluke LinkIQ LIQ-KIT-3PACK – Bundle of 3 Cable+Network Tester kits. Each tester verifies Cat6A/10G LAN cabling, performs PoE tests, and provides switch diagnostics. Includes IntelliTone® Pro 200 probe for cable tracing, remote ID, cords, charger, and carrying case.

Fluke Networks MS-POE-KIT: Handheld cable tester for PoE, twisted pair, and coax networks, with wiremap, length measurement, and IntelliTone cable detection.

The Fluke Networks FI-3000TP-UMPO12F is an MPO 12 or 24 UPC cable tip designed for bulkhead inspection with the FI-3000 FiberInspector. It supports single or dual row FOCIS-5 configurations and accommodates 8, 12, or 16 fiber connectors in UPC or APC formats.

The Fluke Networks TS30 Test Set (30800009) features angled bed-of-nails (ABN) clips, high-impedance DataSafe™ monitoring for live lines, rugged DropSafe™ and RainSafe™ protection, audible ringer, tone/pulse dialing, and last-number redial—ideal for telecomm and outside-plant line work.

Wöhler 4145 thermal printer paper delivers reliable printed documentation for the Wöhler TD 100, with 10 rolls per pack, 12 m per roll, and 57 mm paper width for routine reporting and recordkeeping.

Wohler HD Probe 0.15" / 3' brings slim HD inspection access to tight cavities and small openings when paired with a compatible Wohler VE 400 HD Video Endoscope system.

Johnson Controls P10BC-7C low pressure control, SPDT, 1-stage, 3 to 20 psi range, 12 psig factory setting, 2 psi switch differential, with barbed fitting.

Westinghouse Emerson 5X00226G01 is an Ovation I/O Interface Module for distributed control system signal interfacing, data acquisition, and communication between the control system and connected field devices.

SKF CMSS65-010-00-12-10 is a CMSS 65 series 5 mm eddy current probe with armored cable, 1/4-28 threaded fully threaded case, 3.0 cm case length, and 1.0 m overall length.

The INNO Instrument DIN-18 is a DC power cable designed to connect compatible INNO TS-Pro or TS-Plus thermal strippers to the power output port of supported INNO View series fusion splicers. It enables field operation by allowing the thermal stripper to draw power directly from the splicer’s internal battery.

The Inno Instrument USB-6P is a Mini USB (male) to USB Type-A (female) adapter cable designed for use with INNO M Series fusion splicers. It enables connection of compatible USB accessories such as inspection probes or USB storage devices for data transfer and software updates.

Fluke Networks GLD-DSX2-5-IE-K1 provides 1 Year Gold Support for the DSX2-5-IE-K1. The service includes annual calibration and factory refresh, repair with parts and labor, loaner equipment, accessory replacement, 24x7 technical support, knowledge base access, software and firmware updates, and member-only promotions.

The Eaton E22HL3X4 is a 22.5 mm non-metallic heavy-duty assembled indicating light designed for panel mounting. It features a green LED operating at 24 VAC/VDC full voltage and uses a non-relampable cluster style construction. Rated for NEMA 3, 3R, 4, 4X, 12, and 13 environments.

The Banner BT23S is a bifurcated, diffuse-mode glass fiber optic cable with a 3.2 mm bundle diameter and stainless steel monocoil sheathing. Designed for harsh industrial environments, it supports reliable sensing in high-temperature and electrically noisy applications.

Fluke 80K-40 high voltage AC/DC test probe extends multimeter measurement capability up to 40,000V peak for low-energy CAT I circuits, delivering accurate high-voltage readings with compatible Fluke meters.

Fluke T3000 FC wireless K-type temperature module delivers accurate thermocouple measurements with onboard logging and Fluke Connect compatibility for remote monitoring and data sharing.