Search results for: 'storagein'

The Panametrics-NDTTM EPOCH 4 is an advanced digital ultrasonic flaw detector that combines powerful, fully featured measurement capabilities, a comprehensive internal datalogger, and a wide range of software options to solve many demanding inspection problems.

Phoenix Contact PLC-BSC-24DC/1/ACT relay base for PLC-INTERFACE output functions with screw connection, 24 V DC input, 1 N/O contact, and load return line connection.

INNO SPAW7000 Power Analysis Wavecorder with up to 7 power channels and 2 motor channels, supporting DC–5 MHz bandwidth, harmonic analysis to the 500th order, and high-accuracy power measurement.

The INNO Instrument FL-100-SC-UPC is a 100 m singlemode OTDR launch fiber reel designed for fiber optic testing and link characterization. Featuring SC/UPC connectors on both ends, this launch cable acts as a pulse suppressor and delay line that enables Optical Time-Domain Reflectometers (OTDR) to measure insertion loss.

The INNO Instrument TS Pro Thermal Stripper is designed for removing coating and jacket from optic fibers, supporting single fiber up to 12 ribbon fibers. It accommodates coating diameters from 200 μm to 400 μm and provides selectable heating modes with controlled temperature settings.

Fluke 54 II B Dual Input Data Logging Thermometer measures J, K, T, E, N, R, and S thermocouples with dual inputs and true differential capability. Logs up to 500 data points with adjustable intervals and supports IR USB export.

The Phoenix Contact RAD-OUT-4A-I is a compact analog extension module providing four independent 4–20 mA current outputs. Designed for DIN rail mounting, it operates from a 9–30 V DC supply via a bus foot connector and supports screw terminal wiring. The module is UL listed for Class I, Division 2 hazardous locations and CE compliant.

The Saft LS33600 is a 3.6 V primary lithium-thionyl chloride (Li-SOCl₂) D-size battery designed for long-term, low-to-moderate current applications. It provides a nominal capacity of 17.0 Ah, stable voltage output, and a wide operating temperature range from −60°C to +85°C. This non-rechargeable cell is commonly used in utility metering, industrial electronics, and professional equipment.

Fluke 1550C KIT Insulation Resistance Tester delivers up to 5 kV testing with adjustable test voltages: 50 V increments up to 1000 V and 100 V steps for test voltages over 1,000. Includes DAR results, rugged IP67 case, and long battery life for field use.

Allen-Bradley 700-P200A1 is a NEMA heavy-duty industrial relay with a 110–120VAC coil and two normally open contacts, designed for reliable switching in machine tool and demanding control applications.

Allen-Bradley 1771-A3B1 PLC-5 12-slot I/O chassis provides reliable backplane communication and power distribution for 1771 modules in panel-mounted industrial control systems.

Allen-Bradley 1771-A4B PLC-5 16-slot I/O chassis provides a backplane for mounting 1771 I/O modules, distributing 5V DC power, and supporting industrial PLC-5 control system expansion.

Allen-Bradley 2706-B21J16 DL20 two-line message display provides clear ASCII text output from a host controller using RS-232, RS-422, or parallel communication for industrial notification systems.

Fluke 190-202-III-S portable ScopeMeter delivers 200 MHz bandwidth, 2 channels, 2.5 GS/s sampling, and FlukeView software for advanced industrial diagnostics.

Fluke 1736/EUS logs voltage, current, power, and harmonics with flexible probes, Fluke Connect support, and Class IV safety for reliable three-phase energy analysis.

Fluke 1748/30/EUS captures waveform, transient, and harmonic data with Class A accuracy and 3000A iFlex probes for advanced three-phase power quality analysis.

Fluke’s 1734/EUS is a three-phase electrical energy logger with Wi-Fi and flexible current probes, enabling continuous logging of voltage, current, power, energy, and power factor. Ideal for facility energy audits, load studies, and performance monitoring across distribution panels.

Fluke 283FC TRMS wireless multimeter delivers CAT III 1500V testing, data logging, self-check diagnostics, and Fluke Connect for pro-grade accuracy and workflow efficiency.

NMB 4715KL-05T-B40 delivers high-airflow 24V cooling with durable double ball bearings, ideal for industrial, server, and electronics systems needing reliable heat control.

EM Integrated ASTAQ385MR0553002K000 plug delivers reliable 26-pin signal connectivity with lamella clamping, Series 627 compatibility, and included female contacts.

The WAGO 750-554 delivers precise 4–20 mA analog output for the WAGO 750 Series, providing isolated 12-bit current signals for industrial automation and control.