Search results for: 'test'

Pomona 5698 Universal Adapter Kit enables custom RF adapter configurations using SMA, BNC, TNC, and N interfaces. Designed for flexible signal interconnection with precision RF connectors.

Pomona 4290 SMA Male to BNC Female adapter enables reliable 50-ohm RF signal interconnection for test equipment, antennas, and cables, using gold-plated contacts for consistent performance.

Fluke Networks GLD-MF-1550SMS provides 1-year Gold Support for the MF1550SOURCE, including repair coverage, parts and labor, annual calibration, software updates, loaner service, and 24/7 technical support.

Fluke Networks GLD-DSX-OFP-Q-ADD Gold Support delivers 1 year of parts and labor maintenance with 24x7 technical support, software and firmware upgrades, calibration, repair, and loaner coverage.

Fluke BC430/830 AC Adapter delivers efficient 18V DC power for 430-Series Analyzers and 120B ScopeMeters, ensuring fast, reliable charging.

Full assortment of test functions Precise ACV ACA True RMS Measurements Overload Protection Non-contact voltage detection LCD Display 3-5/6 5999 Counts DCV 600mV/6V/60V/600V ±（0.5% +5d） ACV 600mV/6V/60V/600V ±（1% +4d） TRUE-RMS DCA 60mA/600mA ±（1.2% +5 d）, 10A±（3.0% +5d） ACA 60mA/600mA ±（1.5% +5 d）, 10A±（3.0% +5d）TRUE-RMS Frequency 9.999Hz/99.99Hz/999.9Hz/9.999KHz/99.99KHz/999.9KHz/9.999MHz ±（1.5% +5d） Duty Cycle 21%~99%±（2.5% +5 d） ResistanceΩ 600Ω/6k/60k/600k/6M/60MΩ ±（0.8% +5d） Capacitance 60nF/600nF/6uF/60uF/600uF/6mF ±（4% + 5d）,100mF ±（4% +10d） Temperature(C/F) -20℃~1000℃±（1% + 3d） -4℉~2372℉±（1% + 3d） Continuity Buzzer ≤30Ω , buzzer beeps Diode Test Y NCV Detection Y Data Hold Y LED Light Y LCD Backlight Y Analog Bar Y Low Battery Indication Y Low Battery Indication Y Accessories Test Lead, K-type thermocouple, Manual Power 1.5V AAA x 3pcs (Not Included)

Eagle Eye Power Solutions SLB-Series Smart DC Load Bank Standard delivers programmable constant current battery discharge testing with integrated monitoring, data logging, and wide standard voltage coverage from 10V to 576V.

Viavi JDSU OLS-37: Compact, rugged laser source for FTTH/PON testing. Offers 3 wavelengths (1310/1490/1550 nm) for fast, reliable fiber network diagnostics.

The Fluke FEV-CON-TSL is a Tesla type connector and cable designed for testing AC electric vehicle charging stations when used with the Fluke FEV100 EV Charging Adapter. It enables functional and safety testing of Tesla wall connectors at residential and commercial charging locations. Not compatible with DC fast chargers or Tesla Superchargers.

Fluke CFP-SM MOD module delivers fast singlemode OLTS certification with Taptive interface, accurate referencing, and seamless Versiv platform integration.

Fluke T150 two-pole voltage and continuity tester delivers fast AC/DC measurements from 6–690V with backlit LCD, switchable load, resistance testing, and multi-mode voltage indication for electrical diagnostics.

FThe Fluke 1507 is a compact, rugged insulation resistance tester offering selectable test voltages from 50 V to 1000 V, automatic Polarization Index (PI) and Dielectric Absorption Ratio (DAR) calculations, and CAT IV 600 V overvoltage rating — designed for contractors, industrial maintenance, and commissioning environments.

Fluke 772 Clamp Meter: Effortless 4-20 mA signal measurement & sourcing without breaking the loop. Compact, precise, and built for reliable control testing!

Amprobe 37XR-A digital multimeter delivers True RMS accuracy with component and logic testing, backlit display, and CAT III 600 V safety.

Amprobe LAN-1 Cable Tester: Reliable LED cable verification tool with continuity, shorts, miswire detection, and remote testing for network installers.

Eagle Eye Battery Spill Kit Series provides battery acid spill response support with selectable kit capacities for industrial battery maintenance areas.

Fluke OFP2-CFP-QI Combination Kit – Complete fiber certification solution combining OptiFiber Pro OTDR and CertiFiber Pro OLTS for Tier-1 and Tier-2 testing. Includes Quad (850/1300/1310/1550 nm) modules and FiberInspector camera for end-face analysis.

The Fluke 1630-2 FC is a high-performance ground-loop/leakage clamp meter that enables non-intrusive testing of bonded grounding systems — no auxiliary stakes needed — with wireless logging and rugged construction for industrial use.

LED & HFE test Null DCV Capacitance measurement Overload protection Multi-Function Digital Multimeter Specifications Function Measurement Range DCV 0.1/2.5/10/50/250V, 1000V Null DCV DC ±5V/±25V ACV 10/50/250V, 1000V DCA 50μ/2.5m/25m/250mA, 10A Resistance ×1(0.2~2kΩ)/ ×10(2~20kΩ)/ ×100(20~200kΩ)/ ×1k(200~2MΩ)/ ×10kΩ(2k~20MΩ) Capacitance C(R×1k): 2000μF(Approx.) Max Battery Check 1.5V/9V, Product does not contain batteries Transistor hFE Test Yes Diode & LED Test Yes Continuity with Beeper Yes Front Panel Controls Range selector switch with “OFF” position, 0Ω adjust knob Power Source AAA(1.5V) x 2pcs and 9-Volt x 1pcs

Fluke Networks DSX2-5000 certifies installed copper cabling through the Versiv 2 platform with DSX-5000 measurement modules for structured network testing.

AEMC 6422 Digital Ground Resistance Tester Kit 150ft: Fast 3-point testing with auto-ranging, large LCD, and battery-powered portability.

Fluke 1773/BASIC analyzer delivers automated three-phase power quality testing with fast transient capture, harmonic analysis, and flexible USB/Ethernet data transfer.

Fluke BP290 rechargeable Li-ion battery powers 190-Series II Scopemeter tools with 2400 mAh capacity for extended field use and dependable performance.