Search results for: '1000v 50'

AEMC AmpFlex flexible Rogowski coil sensor, 36" length, measures AC current up to 3000A with 10mV/1mV per amp output for tight spaces.

AEMC PowerPad Model 8436 Power Quality Analyzer supports power quality diagnostics, trend recording, alarms, transients, and electrical network analysis.

3 1/2 digits 1999 counts Dual slope A/D conversion Large backlit LCD display

AEMC PowerPad III power quality analyzer supports single- and three-phase diagnostics with voltage/current inputs, trend recording, alarms, and USB data transfer.

3 5/6 digits 5999 counts 0.5% best accuracy Dual display with analog bargraph Auto/Manual ranging USB data upload Measurement Range DC Voltage (DCV) 600m/6/60/600V ±(0.5%+4d), 1000V ±(1.0%+6d) AC Voltage (ACV) 6/60/600V ±(0.8%+10d), 750V ±(1.0%+10d) DC Current (DCA) 600μ/6000μA ±(1.0%+10d), 60m/600mA ±(1.0%+10d), 6/10A ±(1.2%+10d) AC Current (ACA) 600μ/6000μA ±(1.5%+10d), 60m/600mA ±(1.5%+10d), 6/10A ±(2.0%+15d) Resistance 600Ω ±(0.8%+5d), 6k/60k/600k/6MΩ ±(0.8%+4d), 60MΩ ±(1.2%+10d) Frequency 100/1000Hz ±(0.5%+4d), 10k/100kHz ±(0.5%+4d), 1M/30MHz ±(0.5%+4d) Capacitance 40nF±(5%+30d), 400n/4μ/40μF±(3.5%+8d) 200μF±(5.0%+10d) Temperature -20~400˚C(0~750˚F) ±(1.0%+5d), 400~1000˚C(750~1832˚F) ±(1.5%+15d) Continuity with Buzzer Yes Diode Test Yes Transistor Test Yes Power Source AAA(1.5V)×2pcs (Not included)

3-1/2 digits 1999 counts 0.8% best accuracy Portable one-hand operation Data hold, low battery indication Max. jaw opening: 2 in.

The Fluke 1587/I400 FC pairs a full-featured 2-in-1 insulation tester and True-RMS digital multimeter with a 400 A AC current clamp. Designed for maintenance, motor-drive, and electrical system diagnostics, it offers insulation resistance testing, voltage/current measurements, and clamp-based AC current readings in a single kit

The Fluke 87V/PRV240 Digital Multimeter Kit combines the Fluke 87V Industrial Digital Multimeter with the PRV240 Proving Unit. The 87V supports AC/DC voltage and current measurement up to 1000 V and 10 A, resistance to 50 MΩ, capacitance, frequency to 200 kHz, and temperature from -200°C to 1090°C. The PRV240 provides a portable 240 V AC/DC source for verifying proper meter operation before testing.

Fluke 1550C KIT Insulation Resistance Tester delivers up to 5 kV testing with adjustable test voltages: 50 V increments up to 1000 V and 100 V steps for test voltages over 1,000. Includes DAR results, rugged IP67 case, and long battery life for field use.

The Fluke 87V/E2 CAL Industrial Electrician Combo Kit centers on the Fluke 87V true-RMS digital multimeter and includes essential accessories for industrial electrical measurement. This configuration includes NIST traceable calibration with data and supports AC/DC voltage to 1000 V, AC/DC current to 10 A, resistance to 50 MΩ, capacitance to 9999 µF, frequency to 200 kHz, and temperature to 1090°C. Rated to CAT III 1000 V and CAT IV 600 V.

Fluke 1550C Insulation Resistance Tester delivers digital insulation testing up to 5 kV with DAR/PI calculations, long battery life, and Fluke Connect support.

The Fluke IB875K kit pairs the rugged 87V True-RMS multimeter with insulated hand tools for safe, accurate industrial troubleshooting. It handles complex signals, VFD applications, and demanding environments while the included tools support high-voltage maintenance tasks.

Fluke 177 multimeter delivers True-RMS accuracy, backlit display, and CAT IV safety for fast, reliable electrical troubleshooting in any environment.

The Fluke 87V MAX True-RMS Digital Multimeter is designed for electrical measurement in demanding environments. It measures up to 1000 V AC/DC and 10 A AC/DC, with True-RMS accuracy for non-linear signals. This CAL version includes NIST traceable calibration with data, along with TL175 test leads, temperature probe, holster, and installed batteries.

Fluke 1587 MDT FC kit combines insulation testing, True-RMS multimeter functions, AC current measurement, and phase rotation checks for advanced motor diagnostics.

INNO Instrument SPA2000 digital power meter with 1 power channel, up to 1000 V and 50 A measurement, DC to 100 kHz bandwidth, 4-display LED readout, harmonic analysis to the 100th order, and USB, Ethernet, RS-232/GPIB, and D/A interfaces.

FThe Fluke 1507 is a compact, rugged insulation resistance tester offering selectable test voltages from 50 V to 1000 V, automatic Polarization Index (PI) and Dielectric Absorption Ratio (DAR) calculations, and CAT IV 600 V overvoltage rating — designed for contractors, industrial maintenance, and commissioning environments.

Fluke 77 IV Multimeter: Accurate AC/DC measurement up to 1000 V with backlit display, auto/manual ranging, and ergonomic design for field or bench use.

Fluke 179 multimeter with a built-in thermometer, true-RMS accuracy, and CAT III 1000 V/CAT IV 600 V safety rating for professional diagnostics.

Fluke 1738/EUS Power Logger captures three-phase voltage, current, power, and harmonics with Fluke Connect compatibility for advanced energy analysis.

Fluke 287 CAL logging multimeter delivers True-RMS accuracy with TrendCapture graphing, onboard data logging, and NIST traceable calibration with data.

Fluke 28 II Digital Multimeter: Rugged, IP67 waterproof and dustproof, with true-RMS readings, high-accuracy voltage, current, and temperature measurements.

Fluke 175 multimeter: Reliable true-RMS measurements with CAT III/IV safety ratings, auto/manual ranging, and essential troubleshooting functions.

Fluke 1555 FC insulation tester delivers up to 10 kV testing with data storage, leakage current measurement, and enhanced CAT IV safety.

Amprobe PK-110 kit includes a digital multimeter, GFCI socket tester, and non-contact voltage probe for safe residential voltage and wiring checks.