Search results for: 'contacts'

The AMP 531-353-5 is a panel mount card edge connector from TE Connectivity AMP Connectors. It features six power positions arranged in two rows with female contacts and solder termination. The connector is designed for panel mounting and accepts 0.062 inch card thickness, using a glass-filled polyester housing.

The Mitsubishi UT-ML11 is a mechanical interlock unit designed for use with Mitsubishi Electric MS-T series contactors. It enables safe reversing starter configurations by mechanically preventing simultaneous engagement of paired contactors. Compatible with S-T10, S-T12, and S-T20 frame sizes, the UT-ML11 incorporates built-in auxiliary contacts in reversing applications and supports secure motor control interlocking within industrial control panels.

The Leviton 2453 is a 20 Amp, 277/480 Volt AC locking connector with a NEMA L19-20R configuration. It features a 4-pole, 4-wire, non-grounding design for 3-phase WYE applications. The connector uses an impact-modified nylon body with solid brass blades and contacts.

Pomona 5250 8-Pin SOIC test clip delivers hands-free, noise-free in-circuit testing of SOIC and SOJ chips. Gold-plated contacts ensure reliable connections on live boards.

Pomona 4911A-36-0 patch cord features retractable sheath banana plugs, molded strain relief, and nickel-plated contacts for reliable test connections.

Pomona 3957 adapter cable converts BNC female connections to multi-stacking banana plugs with molded durability, gold-plated contacts, and PTFE dielectric.

Pasthrough holes for excess wire and EASY sorting 3 prong, 50µ gold contacts - the best! Works on solid and stranded wire

Contacts: 6P4C Cable Type: Round Wire Type: Solid Premium 50 µin Gold Qty: 50 pcs

Pomona 4290 SMA Male to BNC Female adapter enables reliable 50-ohm RF signal interconnection for test equipment, antennas, and cables, using gold-plated contacts for consistent performance.

1 x Pomona 2249-C-24 BNC Male to Male Antenna Cable (2 ft)

Application: Multi-Contact (MC4)∅4mm Solar Contacts

The Allen-Bradley 800T-XA2 Series D is a 30 mm industrial control contact block featuring two normally open contacts and an A600 NEMA pilot duty rating. Designed for use with Bulletin 800T operators, it provides screw-terminal connections and base-mount installation for industrial control panels.

The Siemens 3TX4422-0A SIRIUS auxiliary contact block features 2NO + 2NC instantaneous contacts with screw-type terminals. Designed for use with contactor relays and power contactors according to EN 50011, it supports snap-on mounting, IP20 front protection, and positively driven operation per IEC 60947-5-1.

Contacts: 4P4C Cable Type: Flat Wire Type: Stranded Economy Thin Gold Flash Qty: 50 pcs

Contacts: 10P10C Cable Type: Round Wire Type: Stranded Premium 50 µin Gold Qty: 50 pcs

Contacts: 4P4C Cable Type: Flat Wire Type: Stranded Premium 50 µin Gold Qty: 50 pcs

Contacts: 10P10C Cable Type: Round Wire Type: Stranded Premium 50 µin Gold Qty: 1000 pcs

The Struthers-Dunn W88AHPX-36 is a hermetically sealed 3PDT plug-in relay from the 88HP Series, rated 10A and configured for 120VAC operation. It features an 11-pin octal base and a sealed gray metal enclosure designed to prevent contamination and corrosion.

Allen-Bradley 802X-B4 watertight limit switch with top push rod actuator and snap-acting 1NO/1NC contacts. Built for reliable position sensing in harsh industrial control applications.

Application: Multi-Contact (MC3)∅3mm Solar Contacts Crimp Size: AWG 14/12/10 DIN 2.5/4.0/6.0mm

Application: Multi-Contact (MC4)∅4mm Solar Contacts

Schneider Electric Telemecanique LC1D09 is a 3-pole AC contactor with a 120V 50/60Hz coil, rated 9 A in AC-3 applications, with integrated auxiliary contacts.

Contacts: 8P8C Cable Type: Flat Wire Type: Solid Premium 50 µin Gold Qty: 50 pcs