Search results for: 'disc 2'

INNO Instrument PAL-1001 measurement lead set with red and black leads, safety connectors, 1000V CAT II / 600V CAT III rating, and 32A current rating for compatible INNO Instrument power meters and power analyzers.

INNO Instrument PAC-1002 BNC conversion adapter for safety BNC to banana connection, rated 600V CAT III and listed as an accessory for the SPAW7000 power analysis wavecorder.

The INNO Instrument ACC-25-B Power Cable provides AC input connection for INNO Instrument devices that use the JS-180300 AC charging adapter. The cable connects the adapter block to a standard AC wall outlet and is used with compatible INNO Instrument OTDRs and fusion splicers.

The Olympus Vanta VCR-XXC-A3-U handheld XRF analyzer supports alloy identification and positive material identification (PMI) using the AlloyPlus licensed application, enabling rapid alloy grade matching for inspection, maintenance, and quality control workflows.

The INNO Instrument Li-ion 216 is a rechargeable lithium-ion battery pack designed for use with INNO Instrument Mini 2 series fiber optic test equipment, including the Mini 2 OTDR. The battery provides an output of 7.4V with a capacity of 4300mAh (31.82Wh) and installs directly into compatible INNO handheld instruments as a field-replaceable power source.

The INNO Instrument JS-1618 AC Adapter is a 12.6V DC power supply engineered for the View 1, M7, M9, and A3 fusion splicers. It supports direct instrument operation and charging of compatible internal battery packs. The adapter accepts 100–240V AC input for global deployment and provides regulated 12.6V DC output at 1.8A.

The INNO Instrument UN1COMP is a modular fiber splicing workstation kit designed for mobile and elevated field operations. The system includes the UN1CO Mobile tray, tripod stand, ladder and pole mounting brackets, and the UN1CO backpack.  The included mounting options allow use as a wearable workstation and tripod-mounted table.

The INNO B-80 is a 16-position replacement blade designed for INNO fiber cleavers including V7, V7+, V10, V11, V12, V17, VF-15, VF-15H, and VF-78 models. Rated for up to 48,000 cleaves, the B-80 replaces the B-77 blade and supports consistent fiber cleaving in installation and maintenance environments.

Olympus OmniScan X3 PA1664PR 16:64 phased array flaw detector with WiFi 5 adapter, IP65-rated enclosure, TFM-capable PAUT performance, and onboard scan plan tools for efficient weld and corrosion inspections.

The INNO Instrument ACC-25-B AC Power Cable is a standard AC input cord designed to connect compatible INNO Instrument AC adapter blocks to a wall outlet. Featuring a 2-pin wall plug and C7 “Figure-8” connector, it supports 100–240V AC operation when used with approved adapters such as the JS-1618 and JS-180300 for View and M series fusion splicers.

The INNO Instrument FFLBT-50 is a rechargeable 11.1V lithium-ion battery pack rated at 3800mAh (42.18Wh). Designed for use with compatible INNO fusion splicers, it provides field-replaceable power in a compact integrated housing with built-in charge indicator.

The INNO Instrument DIN-18 is a DC power cable designed to connect compatible INNO TS-Pro or TS-Plus thermal strippers to the power output port of supported INNO View series fusion splicers. It enables field operation by allowing the thermal stripper to draw power directly from the splicer’s internal battery.

The Inno Instrument USB-6P is a Mini USB (male) to USB Type-A (female) adapter cable designed for use with INNO M Series fusion splicers. It enables connection of compatible USB accessories such as inspection probes or USB storage devices for data transfer and software updates.

The Inno Instrument HDMI to USB Cable is a communication interface designed for Inno Instrument VIEW series fusion splicers, including VIEW 3, VIEW 5, VIEW 7, and VIEW 12R models. It connects the splicer’s Micro HDMI port to a standard USB Type-A port on a computer for data transfer, software updates, and graphical interface mirroring.

The INNO Instrument LBT-8 is an 880mAh lithium-ion replacement battery designed for INNO TS Plus (TSP-0002 / TS-8+) and TS Pro thermal fiber strippers. It supports approximately 500 stripping cycles of standard 12-fiber ribbon cable in SAVE mode when fully charged. This listing includes the battery only.

The UN1CO Tripod is a dedicated mounting stand designed to support the UN1CO Mobile tray system. It provides an elevated and stable working platform for fiber splicing and FTTH field applications where ladder or pole mounting is not required.

The INNO Instrument UN1COMT is a portable fiber splicing work tray with tripod designed for FTTH field operations. It provides a stable, elevated platform for securing fusion splicers and tools during ground-based or aerial work. The tray features integrated tool compartments and magnetic fixing points for organized equipment handling.

Research-Cottrell RK-1300-CSA TRC interface board for use with SCR firing assemblies in electrostatic precipitator transformer-rectifier power control systems.

The Inno Instrument USB-10P is a DC power cable featuring a USB Type-C connector on one end and a USB Type-A connector on the other. It is designed for powering and charging compatible Inno Instrument fiber optic equipment that utilizes a Type-C power input interface.

Siemens 4700-DC3-11HN digital power meter providing true-RMS voltage, current, power, energy, demand, waveform capture, programmable relays, and analog output for industrial power monitoring systems 

The Rigaku KT-100 is a handheld LIBS analyzer designed for rapid alloy identification and elemental analysis of industrial metals. This configuration includes permanent, transferable calibration matrices covering stainless steels, low alloy steels, aluminum grades, titanium, cobalt, nickel, and copper.

INNO Instrument SCTH1000 is a pass-through current sensor for DC 0–1000A and AC 1000Apeak measurement, with DC–300 kHz bandwidth, ±(0.05% of rdg + 15 μA) accuracy, DB9 interface, and ±15V to ±24V supply.

Fluke Ti300 60 Hz infrared thermal imaging camera kit featuring IR-Fusion® image blending, LaserSharp® Auto Focus, 240×180 resolution, and SmartView® software.