Search results for: 'max the desiner'

The Fluke Networks NFA-MPO12U-KIT is a UniPort™ adapter kit designed for testing MPO12 unpinned fiber cables with the CertiFiber™ Max Optical Loss Test Set. It includes two field-replaceable UniPort adapters that support single-mode or multimode testing and enable standards-preferred one-jumper reference measurements.

Fluke Networks TRC-SM-VERIFY-MMC16U is a reference-grade single-mode verification test reference cord for CertiFiber™ Max optical loss testing. It is a 1 m, 16-fiber, Type A MMC cord with APC/U connectors, used to verify proper reference setup accuracy.

Fluke Networks CFM-TRC-S-MPO12U provides a reference-grade single-mode MPO12 test reference cord set for CertiFiber Max OLTS, enabling standards-preferred one-jumper testing with reduced measurement uncertainty.

Eagle Eye SG-Ultra Series digital hydrometers help match portable density and specific gravity measurement to the right configuration, from SG-Ultra routine testing to Max range, Max Plus connectivity, and Ex Petrol flammable product workflows.

Fluke Networks NFA-MMC24U-KIT UniPort Adapter Kit is designed for testing MMC 24 unpinned single-mode or multimode fiber cables with the CertiFiber™ Max Optical Loss Test Set. The kit includes pinned UniPort adapters and supporting components for fiber loss, length, and polarity measurement applications.

Fluke 113 multimeter offers fast low-impedance VCHEK testing with AC/DC voltage detection, continuity checks, a bright backlit display, and CAT IV 600 V safety rating.

Weidmuller PRO MAX 480W Power Supply: High-efficiency 24V, 20A power solution for demanding automation. Reliable performance in extreme conditions with long-lasting durability.

The Fluke 87V MAX True-RMS Digital Multimeter is designed for electrical measurement in demanding environments. It measures up to 1000 V AC/DC and 10 A AC/DC, with True-RMS accuracy for non-linear signals. This CAL version includes NIST traceable calibration with data, along with TL175 test leads, temperature probe, holster, and installed batteries.

Fluke Networks TRC-SM-VERIFY-MPO12U is a reference-grade single-mode MPO12 Type A verification cord designed to confirm proper reference settings when testing unpinned MPO cables with CertiFiber Max systems.

The Fluke Networks NFA-MPO12P-KIT is a UniPort adapter kit designed for MPO 12 pinned fiber testing with the CertiFiber™ Max Optical Loss Test Set. It supports single-mode and multimode testing and enables standards-preferred one-jumper reference measurements while protecting the test port.

Fluke 62 MAX+ infrared thermometer delivers precise -30°C to 500°C readings, rugged IP54 protection, and a 3-meter drop-tested design.

Megger BITE3 Battery Tester: Accurate impedance & voltage measurements for lead-acid batteries. Fast, reliable results with PowerDB software. Portable & easy to use.

Reference-grade single-mode verification test reference cord designed for use with the CertiFiber™ Max Optical Loss Test Set. This 1 m, 16-fiber Type A cord supports pinned MMC16 testing and uses MMC APC/P to MMC APC/P connectors to verify proper reference setup and measurement accuracy.

The INNO Instrument View 5X is a core alignment fusion splicer designed for single-fiber applications across SM, MM, DS, and NZDS fibers. This kit includes the V12 cleaver, integrated heater, 5.0” touchscreen, IoT & GPS capability, battery, and carrying case.

The Fluke Networks TRC-SM-VERIFY-MMC24U is a reference-grade single-mode verification test reference cord designed for testing unpinned MMC 24-fiber cables with the CertiFiber™ Max Optical Loss Test Set. It features 24 fibers, Type A polarity, MMC APC/U connectors, and a 1-meter length to support accurate reference verification.

The Fluke Networks TRC-SM-VERIFY-MMC24P is a reference-grade single-mode verification test reference cord designed for testing pinned MMC 24-fiber cables with the CertiFiber™ Max Optical Loss Test Set. It supports verification that the test reference has been set correctly using reference-quality fiber and connectors.

Parameter Value Consumption Max. 8W Temperature Max. 932°F (500°C) Operation Time Approx. 1.5h Battery Model 3.6V 2200mAh Working Indicator Red – ChargingGreen – Full chargedBlue – In use Accessories 18650 Li-ion battery, USB cord

Fluke Networks TRC-SM-VERIFY-MPO16U is a reference-grade single-mode MPO16 verification cord designed for CertiFiber Max optical loss testing, ensuring accurate reference validation for unpinned MPO16 links.

Fluke Networks NFA-MMC24P-KIT UniPort adapter kit includes two unpinned UniPort adapters for testing single-mode or multimode MMC24 pinned cables with the CertiFiber™ Max Optical Loss Test Set. Supports one-jumper reference methods and field-replaceable adapter protection.

Fluke Networks ADP-MPO12/24-A is an MPO APC adapter coupler designed for verification and inspection of 12 or 24 fiber MPO APC cables when used with CertiFiber Max optical loss test systems.

The INNO Instrument VIEW 12R MAX is a 12-fiber ribbon fusion splicer using clad alignment technology and a 5.0-inch full-touch LCD interface. It supports 1–12 fiber splicing for SM, MM, DS, and NZDS fibers with integrated heater and included V12 cleaver kit.

Tele Controls RM024LD relay delivers reliable 24VDC switching with LED status and diode protection, ideal for RM series industrial control and automation systems.