Search results for: 'motors'

Lenze E82EV152-4B delivers reliable 1.5 kW vector control for industrial motors with modular integration and optimized performance for 400–500V automation systems.

Toshiba VFS9-4022PL-WN offers reliable 3HP motor control with sensorless vector performance, built-in EMI filtering, and 380–500V compatibility for VF-S9 applications.

Square D ATV66U41N4 delivers reliable 3 HP motor speed control with 460V operation, Modbus communication, and adjustable frequency for industrial automation.

Fluke FLUKE-355 Clamp Meter: High-current True-RMS AC/DC measurements up to 2000A with wide jaw capacity, surge capture, and CAT IV safety for demanding electrical work.

Lenze EVF8244-E delivers precise 3 kW motor control with stable performance, advanced vector features, and compatibility across the 8200 Series. Ideal for industrial drives.

Eaton C25BNF220A delivers reliable 20A motor switching with a 120V coil, ideal for HVAC, refrigeration, pumps, and industrial control panels.

Allen-Bradley 20AD011A0AYNANNN PowerFlex 70 drive delivers reliable 480V, 7.5 HP motor control with enhanced performance, braking capability, and panel-mount design.

Complete Pruftechnik ROTALIGN Ultra kit with Shaft Alignment Advanced license, ROTALIGN sensor and laser, Bluetooth module, chain and magnetic bracket sets, cables, software, and ABS transport case.

The Signal Fire AI-5 is a core alignment, single fiber fusion splicer with 4 motors and an S07 cleaver. Fast 8s splice, 18s heat, portable and field ready.

Commtest vb7 vibration data collector for route-based machinery vibration measurement, spectrum and waveform analysis, balancing, and condition monitoring with firmware v2.1.8 and IMI ICP accelerometers.

The Fluke 810 Vibration Tester is a handheld diagnostic instrument for identifying mechanical vibration faults in rotating equipment. Using tri-axial measurement and on-device analysis, it reports fault type, location, and severity during field testing.

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

Fluke voltage probe set: Double-insulated, CAT III/IV rated, 500 MHz bandwidth for industrial and electronics testing with portable oscilloscopes.

Toshiba VT130H9U4055 H9 drive delivers precise 5HP 460V 3PH motor control with vector control, motor-over-flux braking, and NEMA 1 industrial reliability.

Eaton DILEM-10 mini contactor delivers 8.80A switching, three-pole FVNR control, 1NO contact configuration, and 110–120 Vac coil operation in a compact IEC frame.

The Amprobe ULD-405 Ultrasonic Leak Detector is designed to locate ultrasonic sound generated by air and gas leaks in mechanical and electrical systems. Featuring a 2.5" LCD display with bargraph and adjustable receiver sensitivity, it converts high-frequency ultrasound into audible signals for precise leak pinpointing in compressed air systems, valves, piping, motors, and HVAC equipment.

The Fluke 53-II B is a single input digital thermometer designed for contact temperature measurement using J, K, T, E, N, R, and S thermocouples. It logs up to 500 temperature readings at user-adjustable intervals and includes a real-time clock for time-stamped data review.

The Fluke 1587T Insulation Multimeter combines a digital insulation tester with a true-rms digital multimeter in one handheld instrument. Designed for telecom applications, it provides 50 V and 100 V insulation test voltages along with AC/DC voltage, millivolt, milliamp, resistance, and continuity measurements.

The Mitsubishi CP30-BA 1-Pole 7A M-Curve Circuit Protector is a compact hydraulic-magnetic circuit protector designed for supplementary protection of low-capacity industrial control circuits. It supports AC 250 V and DC 65 V operation and uses an M-curve trip characteristic suitable for moderate inrush loads.

The Mitsubishi CP30-BA 1-Pole 3A M-Curve Circuit Protector is a compact hydraulic-magnetic supplementary protector designed for low-capacity control circuits. It supports AC 250 V and DC 65 V operation, offers 2.5 kA breaking capacity, and mounts on standard DIN rail using screw terminals.

Fluke 301D-R AC/DC Clamp Meter delivers up to 600A current measurement in a slim, handheld design with a thin 10 mm jaw, backlit display, and essential electrical test functions for tight spaces.