Search results for: 'rated to with'

Fluke 381 clamp meter: Remote display and iFlex probe enable safe AC/DC current, voltage, resistance and frequency measurements in tight, noisy panels.

Automation Direct D4-08B-1 DL405 8-slot I/O base delivers reliable panel-mounted rack support for DirectLOGIC 405 PLC systems needing flexible modular expansion.

With its increased cell count and enhanced measurement capabilities, the Si-CA 230 is well-suited for the most robust industrial machinery. Its ability to accommodate a wider range of gases and a high CO tolerance threshold makes it a versatile and excellent choice for applications spanning residential, commercial, and industrial sectors.

Introducing the OWON XDS4504 Digital Oscilloscope: Unleash Your Full Potential

AEMC PowerPad III power quality analyzer supports single- and three-phase diagnostics with voltage/current inputs, trend recording, alarms, and USB data transfer.

AEMC PowerPad III power quality analyzer supports electrical diagnostics, power monitoring, harmonics, alarms, transients, and energy analysis for single- or three-phase networks.

Gould Shawmut A70P100-4 semiconductor fuse delivers 100A protection with 700VAC and 650VDC ratings, designed for high-speed circuit protection in power electronics and semiconductor applications.

Eaton PKZM0-25/NHI11 motor-protective circuit breaker delivers adjustable 20–25 A thermomagnetic motor protection with phase-failure sensitivity for motor control and panel protection applications.

Littelfuse JTD-030ID fuses deliver 30A Class J circuit protection with indicating status visibility, 600 VAC or less rating, and time-delay performance for compatible electrical systems.

KATKO KU 380N load break switch delivers 3-pole isolation and switching up to 80A at 690V AC-22, supporting reliable control and disconnection of electrical loads in industrial power systems.

Eaton PKZM0-10 motor-protective circuit breaker delivers adjustable 6.3-10 A motor protection, phase-failure sensitivity, and 4 kW performance at 380/400 V AC-3e in a compact three-pole design.

The Eaton P1-25/V/SVB is a 25 A, three-pole main switch from the Eaton Moeller® P1 series designed for rear mounting applications. It features a door-coupling rotary drive with a red rotary handle and yellow locking ring, and supports emergency switching off functionality. The switch is rated up to 690 V AC, provides IP65 front protection, and is lockable in the 0 (Off) position for secured isolation.

Eaton Cutler-Hammer C320KGS1 is a Freedom Series side-mounted auxiliary contact block with 1NO contact configuration for NEMA sizes 00 to 2 and IEC sizes A to K.

The Eaton FAZ-C20/3 is a 20 A, three-pole miniature circuit breaker from the Moeller xEffect FAZ series. It features a C tripping characteristic and is rated for 240 V AC / 415 V AC applications. Designed for industrial and advanced commercial switchgear, it mounts on a 35 mm top-hat rail in accordance with IEC/EN 60715 and supports modular installation with a width of three modules.

The ABB S271-K0.5A Miniature Circuit Breaker is a single-pole, DIN-rail mounted protection device from the System pro M S 270 series. It features a K-curve tripping characteristic with a 0.5 A rated current and 230/400 V AC rated voltage. Designed for cable and appliance protection, it provides thermal and magnetic trip mechanisms with a rated short-circuit breaking capacity of 6 kA in accordance with EN 60 898.

Allen-Bradley 1489-M1C250 is a 25A UL489-listed 1-pole DIN-rail circuit breaker with C-curve thermal-magnetic protection, designed for reliable branch circuit protection in industrial control panels.

Mersen / Ferraz Shawmut A155F2D0R0-125E is a 15.5 kV, 125E medium-voltage, E-rated Amp-Trap® CS-3 series ferrule-mounted fuse. Designed for transformer and distribution protection, it provides current-limiting performance with visual blown-fuse indication and compatibility with standard spring-reinforced clips.

Panasonic TH2376 is a TH23 series panel-mount hour meter rated for 115 to 120V AC at 60 Hz. It features a reset function and displays elapsed time from 0 to 9999.9 hours in 0.1-hour increments. Designed in DIN 48 size, it includes mounting bracket and decorative nut.

AEMC 5000.91 Fuse Set of 5 UL rated 0.63A fuses, 6x32mm size, designed for fused leads ensuring reliable circuit protection.

Bussmann JP60030-3PR is a 3-pole Class J pyramid fuse block rated 30 A and 600 V for panel-mounted circuit protection using LPJ, DFJ, and JKS fuses in control and power distribution assemblies.

Eaton DILEM-10 mini contactor delivers 8.80A switching, three-pole FVNR control, 1NO contact configuration, and 110–120 Vac coil operation in a compact IEC frame.

The Siemens 3TF3000-0A is a 3-pole AC contactor from the 3TF30 series rated 9 A (AC-3 at 380/400 V) with insulation voltage up to 690 V. Designed for motor control applications at 50/60 Hz, it complies with IEC 947 and VDE 0660 standards.

The AEG SH 05.31 is a 4-pole auxiliary contactor from the SH 05 series with a 24V DC coil. It features a 3NO + 1NC contact configuration (31E) and screw terminals. Rated per AC-15 and DC-13 utilization categories as specified in the AEG 2014 extract catalogue.

Bussmann LPJ-15SP time-delay fuse delivers 15A circuit protection with dual-element response and current-limiting performance for industrial electrical systems up to 600VAC.

AEMC Banana (Female) to BNC (Male) adapter XM-BB, rated 600V CAT III, compatible with AmpFlex sensors, Models K100/K110, and SLII Data Loggers.