Search results for: 'the the'

The MFT-X1 is a multifunction tester designed primarily for testing electrical installations to meet the requirements of international regulations and standards. It has been designed with safety, versatility, ease of use and reliability in mind and it has an entirely new user interface that simplifies and speeds up testing as well as greatly reducing the risk of errors.

Product Overview

The weigh-below hook for Nimbus balances with the 400 x 300mm ø pan sizes allows for below balance weighing. This allows you to weigh messy samples that might not fit into the weighing chamber. Weighing below the balance does not augment your product's capacity.

The SiteScan 250S includes all the software features of the 150S combined with a narrow band amplifier and TCG for more demanding ultrasonic applications. The square wave ActiveEdgeTM pulser automatically optimizes for each filter band selected, ensuring maximum performance.

Enhance your efficiency with the testo 310 combustion analyzer. Whether you require basic or more intricate combustion tuning, maintenance, or safety checks, this fully featured tool offers an array of combustion parameters. The 310 ensures accurate heating adjustments, allowing you to get it right on the first try.

The Adam Equipment in-use cover is a disposable, see-through wet cover that is designed to protect your balance from dust and other materials that can decrease its longevity and increase the need for costly maintenance. The cover is easy to use and allows you to access all of the functions of your balance as if nothing was on it. By using this cover, you can reduce the need for costly maintenance and prolong the life of your balance.

Key Features 

The tripod legs raise the height of the TBB triple beam balance for performing density / specific gravity calculations. Raising the TBB's height also allows bulkier samples to be measured with below balance weighing.

Expands the weighing capacity of the TBB to 2610g TB allows a combination of the three weights to be placed at the end of the balance to extend the weighing range of the balance For use with Model TBB Triple Beam Balance

The Fujikura 70S+ is the world’s fastest and most robust core alignment fusion splicer. A user-programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splicing process and opening upon splice completion. Fully programmable “auto open sheath clamps” open one or both sheath clamps, after the tensile test, to prepare the fiber for removal. A new automated “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 13-second shrink time. The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhanced by a mirrorless optical system and a """"severe-impact resistant"""" monitor. Battery capacity is now 200 splices/shrinks.

The Calibration Certificate can only be ordered with the IHS/LHS/AFK 600/GFK 600/PTM. It provides information about the machine's performance and accuracy. Generally, it's a requirement of any company with ISO Quality systems in place where a record of the scale's calibration needs to be kept by the user. Please note: we can not issue calibration certificates to scales previously supplied that did not include a certificate in the order. These certificates do not make the scale or balance Trade Approved.

This temperature calibration kit for the PMB Moisture Analyser can be used to help calibrate the temperature sensor. The kit comes with a case and a device to hold the sensor in the optimum position.

Enhance the capabilities of your Autel EVO II drone for various professional and emergency applications using the FoxFury D100 Exolander Payload Delivery System Bundle designed for EVO II by Autel Robotics. This comprehensive package consists of the FoxFury D100 LED light, the TacSwan Exolander device, and the TacSwan Payload Delivery System. Both the D100 light and the payload delivery system are attachable to the Exolander, which plays a crucial role in maintaining the EVO II's optimal balance. By utilizing the D100 and the payload delivery system, you gain the advantage of improved nighttime or low-light flying conditions, enabling you to effectively airdrop essential supplies or safety gear to individuals in critical situations.

Improve your aerial journey with the On the Go Bundle designed for EVO Lite+ by Autel Robotics. This package includes a range of necessary add-ons, including two extra flight batteries in a gray hue, a multi-battery charger, a complete set of four substitute propellers, a set of four ND filters, and a safeguarding shoulder bag for convenient transportation to your filming site. The multi-charger enables the simultaneous recharging of up to three flight batteries, while the ND filter set diminishes the amount of incoming light on the gimbal, effectively minimizing glare and unwanted reflections in your visuals and pictures.