Search results for: 'goods'

Eagle Eye BA-TOOLS-BTTPCK is a 1000V 24 pc. telecommunication tool kit with impact resistant, flame retardent insulation, two-color insulating material, and a yellow underlayer for ease of inspection.

The Eagle Eye IBEX-Temperature Probe-IR is a temperature probe accessory designed for use with IBEX battery testing equipment. The probe connects via cable and supports temperature measurement during battery testing and diagnostic procedures.

Eagle Eye IBEX-Extended Arm Rod Set is a 30 in. LED-lit test lead extender designed for use with IBEX-Series testers to reach battery terminals in difficult locations.

Fisher PROBE-TW6 tracer probe plugs into the TW6 receiver to improve underground cable and pipe locating. Ideal for hard-to-reach areas, it enhances pinpoint accuracy and control.

Fluke 572-2 Infrared and Contact Thermometer measures from -30°C to 900°C (-22°F to 1652°F) with a 60:1 distance-to-spot ratio and dual laser sighting. Features adjustable emissivity, MAX/MIN/DIF/AVG display modes, and multi-language interface. Includes K-type bead probe, hard case, and USB cable.

Fluke SOL-TRNG-SPEC PVA Specialist Training is a live virtual class covering I-V curve tracing, Solmetric PV Analyzer operation, data management, deviation analysis, reporting, and acceptance testing for PVA-1500 Series users.

Fluke Networks FPC3S-LIQ-DUO provides three years of Premium Care Standard coverage for the LinkIQ 200 Duo main unit. The plan includes repair coverage beyond the original warranty, annual calibration or performance check, expedited shipping, and priority technical support.

The Fluke CV400 is a 4 in (95 mm) infrared window with hand turn door latch for electrical panel inspection. It features a ClirVu coating system, AutoGround functionality, IP67 rating, and a 63 kA arc-blast rating tested at KEMA. Designed for quick installation without removing the panel door.

Fluke Networks GLD-DSX-602 1 Year Gold Support provides maintenance coverage for the DSX-602. Coverage includes firmware updates, software upgrades, repair services, parts replacement, annual calibration, loaner unit support, and 24x7 technical assistance through authorized service centers.

Fluke Networks GLD-FI-7300 1-Year Gold Support provides maintenance and support coverage for the FI-7300. Coverage includes technical support, repair services with parts and labor, software and firmware updates, calibration, and qualified accessory replacement during the contract term.  

The IDEC CS-10 ACSSO contact block is a cam switch component configured with one normally open contact and circuit designation C-2004. It is rated for 600 V insulation voltage and 10 A thermal current, utilizes silver contacts, and is designed for industrial control applications requiring reliable mechanical switching performance.

The Gould Modicon B803 is a discrete input PLC module for Modicon 800 Series controller platforms. It provides eight isolated 115 VAC input points used to translate field-level ON/OFF signals into logic states readable by the PLC CPU in industrial automation systems.

Special value kit for electrical professionals looking to add DC and AC current measurement capability to their digital multimeter. Includes a Fluke i410 AC/DC current clamp and a roomy zippered vinyl carry case with movable divider and storage for test leads, probes, and manuals.

Fluke TP2 Slim-Reach test probe set includes one red and one black probe with 2 mm diameter stainless steel tips. Designed for probing closely spaced or recessed terminals, the probes are rated for 10 A and suitable for CAT III 1000 V and CAT IV 600 V environments.

Fluke TP220 industrial test probes include one red and one black probe with sharp stainless steel tips for reliable electrical contact. SureGrip overmolded handles and a flexible finger barrier support steady probe placement during measurement tasks. Designed for use with compatible Fluke test leads.

The Sprecher + Schuh D5-3T12 is a transformer element for D5 series 22 mm pilot devices. It converts a 480 V control voltage to a 6 V output for powering an incandescent lamp, allowing low-voltage lamp operation in high-voltage industrial control panels.

The REXA Koso S96111 Pulse Mod I/O Interface PCB Board is an internal electronic module used in REXA Electraulic™ actuators. It supports pulse modulation control and manages input and output signals within the actuator’s control system for precise positioning and communication.

The Schrack ZG400615 is a used ice cube relay rated for 5 Amps and up to 600 Volts. It features a 14-pin plug-in design and a 115 VAC coil voltage, making it suitable for general industrial control and electrical switching applications where reliable electromechanical control is required.

Fluke VPS410-II-R industrial voltage probe set delivers 500MHz bandwidth and 10:1 attenuation for accurate high-voltage signal measurement with compatible Fluke 190-II Series oscilloscopes.

Fluke 3PHVL-17XX-5M is a 3-phase + neutral voltage test lead cable assembly designed for structured multi-phase measurements, delivering organized lead management and reliable electrical connectivity over a 5 m length.

The Balluff BFO-48G-DSV-SC-1 is a glass fiber optic cable designed for use with a separate fiber optic base unit. It supports diffuse reflection sensing in side-view configurations and is suited for industrial detection tasks in harsh environments.

The Mitsubishi A1SG60 is a blank slot cover dummy module for MELSEC-A series PLC base units. It fills unused slots to protect internal components, reduce exposure to dust or foreign objects, and help maintain system stability when vacant slots are present.

The Molex 1300140037 is a 7-pole female circular connector pigtail designed for industrial electrical connections. It features a straight orientation, front panel mount configuration, and a 1/2-14 NPT mounting thread. The assembly is terminated with UL 1015 16 AWG lead wires and housed in a zinc die-cast body with black epoxy finish for durability.

ABB Steel City 72171 is a 4-11/16 in square steel electrical box with a 2-1/8 in depth and 42 cu in capacity. Constructed from pre-galvanized steel, it features eccentric knockouts for 1/2 in and 3/4 in conduit and is designed for commercial conduit wiring installations.

The Raco 3543-8 is a 3/4 in. 90 degree liquidtight connector with an insulated throat, designed for use with flexible metallic and Type B flexible nonmetallic liquidtight conduit in wet locations. Constructed from zinc-electroplated steel/malleable iron for corrosion protection.