Search results for: 'goods stock'

Fischer 333007 Pneumatic Preparation Unit provides organized pneumatic routing for Seal Air, Taper Air, Tool Eject, and Cylinder Vent circuits in industrial equipment setups.

Leviton 069-ML1-C MiniLock Connector delivers secure 15A 125V industrial-grade power connectivity using a compact locking design for reliable electrical connections in demanding environments.

Orbit OF7716 2-inch EMT set-screw coupling delivers secure steel conduit joining with zinc electro-plated construction for reliable electrical raceway continuity in EMT installations.

Omega CN9111A temperature controller delivers precise thermal regulation with dual relay outputs and 115V operation, supporting controlled heating and cooling processes across industrial environments.

Hubbell HBL300FBK single pole female plug delivers high-current 300A, 600V power connection performance in a black single-pole configuration for demanding electrical connection points.

Champion TSW-12A-2P Power Switch Box delivers reliable dual AC power switching in a compact enclosure designed for controlled electrical distribution and system integration.

The Wöhler Rotary Viper Stovepipe 8' is a compact rotary cleaning tool for stovepipes, ducts, and dryer vents. Designed for stovepipes from 4" and built with an M10 threaded endpiece, it offers a practical option for targeted rotary cleaning in shorter runs.

R. STAHL INTRINSPAK 9001/02-093-030-10 safety barrier for industrial control and intrinsically safe interface applications, identified with 250V and 30 mA raw-data rating information.

GAI-Tronics 12511-001 is a dynamic noise-canceling transmitter replacement kit for compatible handsets in industrial paging systems. The kit includes the transmitter element and replacement cap and is identified as a replacement for legacy part 12511-007.

Westinghouse Emerson 5X00070G34 is an Ovation analog input module. The front label identifies analog input ranges of ±20 mV, ±50 mV, and ±100 mV. Module only.

General Electric CR2790E100A2 general purpose control relay with 115V AC 60Hz coil, 10A contact rating, and 300V max rating for industrial control and switching applications.

Eagle Eye BA-TOOLS-BTTPCK is a 1000V 24 pc. telecommunication tool kit with impact resistant, flame retardent insulation, two-color insulating material, and a yellow underlayer for ease of inspection.

The Eagle Eye IBEX-Temperature Probe-IR is a temperature probe accessory designed for use with IBEX battery testing equipment. The probe connects via cable and supports temperature measurement during battery testing and diagnostic procedures.

Eagle Eye IBEX-Extended Arm Rod Set is a 30 in. LED-lit test lead extender designed for use with IBEX-Series testers to reach battery terminals in difficult locations.

Fluke 572-2 Infrared and Contact Thermometer measures from -30°C to 900°C (-22°F to 1652°F) with a 60:1 distance-to-spot ratio and dual laser sighting. Features adjustable emissivity, MAX/MIN/DIF/AVG display modes, and multi-language interface. Includes K-type bead probe, hard case, and USB cable.

Fluke SOL-TRNG-SPEC PVA Specialist Training is a live virtual class covering I-V curve tracing, Solmetric PV Analyzer operation, data management, deviation analysis, reporting, and acceptance testing for PVA-1500 Series users.

Fluke Networks FPC3S-LIQ-DUO provides three years of Premium Care Standard coverage for the LinkIQ 200 Duo main unit. The plan includes repair coverage beyond the original warranty, annual calibration or performance check, expedited shipping, and priority technical support.

The Fluke CV400 is a 4 in (95 mm) infrared window with hand turn door latch for electrical panel inspection. It features a ClirVu coating system, AutoGround functionality, IP67 rating, and a 63 kA arc-blast rating tested at KEMA. Designed for quick installation without removing the panel door.

Fluke Networks GLD-DSX-602 1 Year Gold Support provides maintenance coverage for the DSX-602. Coverage includes firmware updates, software upgrades, repair services, parts replacement, annual calibration, loaner unit support, and 24x7 technical assistance through authorized service centers.

Fluke Networks GLD-FI-7300 1-Year Gold Support provides maintenance and support coverage for the FI-7300. Coverage includes technical support, repair services with parts and labor, software and firmware updates, calibration, and qualified accessory replacement during the contract term.  

The IDEC CS-10 ACSSO contact block is a cam switch component configured with one normally open contact and circuit designation C-2004. It is rated for 600 V insulation voltage and 10 A thermal current, utilizes silver contacts, and is designed for industrial control applications requiring reliable mechanical switching performance.

The Gould Modicon B803 is a discrete input PLC module for Modicon 800 Series controller platforms. It provides eight isolated 115 VAC input points used to translate field-level ON/OFF signals into logic states readable by the PLC CPU in industrial automation systems.

Special value kit for electrical professionals looking to add DC and AC current measurement capability to their digital multimeter. Includes a Fluke i410 AC/DC current clamp and a roomy zippered vinyl carry case with movable divider and storage for test leads, probes, and manuals.

Fluke TP2 Slim-Reach test probe set includes one red and one black probe with 2 mm diameter stainless steel tips. Designed for probing closely spaced or recessed terminals, the probes are rated for 10 A and suitable for CAT III 1000 V and CAT IV 600 V environments.

Fluke TP220 industrial test probes include one red and one black probe with sharp stainless steel tips for reliable electrical contact. SureGrip overmolded handles and a flexible finger barrier support steady probe placement during measurement tasks. Designed for use with compatible Fluke test leads.