Search results for: 'brands'

The SATO RH1730800 is a genuine internal replacement part identified as a Cover Open Switch cable for SEN6-compatible SATO printer models. This component connects the printer’s cover detection mechanism to the main board, supporting proper open/close status recognition. Classified as an internal printer spare part, RH1730800 is intended for maintenance or repair of supported legacy SATO printers and has been designated end-of-life by the manufacturer.

The Leviton 2453 is a 20 Amp, 277/480 Volt AC locking connector with a NEMA L19-20R configuration. It features a 4-pole, 4-wire, non-grounding design for 3-phase WYE applications. The connector uses an impact-modified nylon body with solid brass blades and contacts.

The Allen-Bradley 800FM-MT44 is a metal emergency stop push button operator with a 40 mm red mushroom actuator and twist-to-release operation. Designed for 22.5 mm panel mounting, this non-illuminated operator is part of the Bulletin 800FM metal series for industrial control applications.

Fluke I40S-EL AC clamp-on current transformer for low current measurement up to 40 A. Designed for accurate readings on 1 A and 5 A secondary current transformers with a compact clamp profile.

Fluke 417D/62MAX+ combines a laser distance meter and IR thermometer for HVAC layout, diagnostics, and electrical troubleshooting, delivering fast distance measurement and non-contact temperature readings.

Fluke Networks FINDFIBER FindFiber Remote ID Source enables fast optical fiber identification when used with a SimpliFiber Pro power meter, allowing single-technician verification of fiber routing and polarity.

PLS 3R Z 3-point red self-leveling laser level delivers fast plumb reference points with ≤1/8 inch accuracy at 30 feet. Designed for precise layout with pendulum lock control.

Fluke GEO CABLE-REEL 50M provides a 50-meter earth ground test lead on a compact reel for grounding and earth resistance testing with Fluke GEO instruments, delivering organized cable deployment and reliable field use.

The Telemotive E7150-1-B is a radio remote control receiver module used in industrial wireless control systems. It functions as the fixed receiving unit that interprets signals from a paired handheld transmitter to control machinery. The module operates as part of a Telemotive radio control system and includes diagnostic indicators for system monitoring and troubleshooting.

Amprobe THWD-3 digital psychrometer measures humidity and temperature with dew point and wet bulb calculations. Dual display and extended probe support HVAC duct and ambient air diagnostics.

The FANUC A06B-6114-K213/E is an industrial connector plug used for encoder or brake connections on FANUC servo motors. Manufactured for CNC and automation systems, this connector is supplied as a right-angle style plug and is identified by the FANUC part number A06B-6114-K213/E.

Fluke MP1-MAGNET PROBE 1 magnetic probe tips provide secure hands-free contact for voltage test leads with 4 mm banana connectors, designed for Fluke 1736 and 1738 power quality analyzers.

Fluke IR3000FC infrared connector enables wireless data transfer from compatible Fluke meters to smartphones. Designed to fit IR ports on select Fluke tools for mobile graphing, saving, and sharing.

Fluke 80PK-22 immersion temperature probe delivers reliable Type-K measurements for liquids and gels. Designed for wide temperature ranges and fast response when used with compatible thermocouple instruments.

Fluke TL80A test lead set delivers flexible silicone leads, fine electronic probes, and banana plug compatibility for accurate low-energy electronic measurements with Fluke and compatible multimeters.

Fluke TB25 tool bucket organizer delivers rigid protection and efficient storage with a waterproof hard bottom and 28 pockets. Designed to carry hand tools, meters, and test accessories securely.

Fluke 80PK-9 Type-K general purpose temperature probe designed for surface, air, and non-caustic gas measurements, offering reliable contact sensing across a wide industrial temperature range.

Fluke TP82 insulation piercing probe tips enable non-destructive testing through wire insulation. Designed for 4 mm banana leads, they support precise diagnostics on automotive sensors and wiring without stripping insulation.

Fluke T5-KIT accessory starter kit expands Fluke T5 electrical tester capability with SureGrip test probes, large jaw alligator clips, and a zippered soft carry case for organized field use.

Fluke TL28A automotive test leads provide reliable electrical access using wide-jaw alligator clips and a piercing probe. Silicone-insulated red and black leads support accurate automotive diagnostics.

Fluke INLP8 insulated long nose pliers deliver precise gripping and wire cutting with milled gripping zones and a slim jaw profile, designed for controlled work on energized electrical circuits.

Fluke 80BK-A is a Type-K thermocouple temperature probe designed for compatible digital multimeters, enabling accurate surface temperature measurements from −40°C to 260°C using standard shrouded banana inputs.

Fluke TP40 automotive back probe pins provide flexible 4mm banana jack connections for accessing sealed connectors. Designed for safe probing of fuel injectors, TPS, and MAP sensors up to 60 V DC.

Fluke AC87 bus bar clips provide a secure, hands-free connection to flat bus bars for electrical testing. Designed for heavy-duty use, these right-angle test lead accessories support safe, stable measurements.

Pomona 6343 Basic Electronic Test Lead Kit delivers right-angle DMM probes, extended fine tips, and alligator adapters for safe, precise electronic testing across compatible digital multimeters.