Search results for: 'connectors'

Fluke CertiFiber Pro CFP-Q-ADD Quad OLTS Add-On Kit – Expand your CertiFiber Pro setup with dual Quad OLTS modules, multimode & single-mode TRC kits, adapters, and hard carry case. Enables Tier-1 fiber loss, length & polarity testing with full reference cords included.

Black Box IC107A-R2 RS-232↔RS-422/485 converter for data-only serial communication. Supports 4-wire full-duplex operation for point-to-point or multipoint links. Provides a DB25 female RS-232 interface and a 4-pin terminal block for RS-422/485 with TX/RX/PWR LEDs.

INNO Instrument SCTH1000 is a pass-through current sensor for DC 0–1000A and AC 1000Apeak measurement, with DC–300 kHz bandwidth, ±(0.05% of rdg + 15 μA) accuracy, DB9 interface, and ±15V to ±24V supply.

The INNO Instrument CJ-11 is a vehicle power cable designed to operate and charge compatible INNO fiber fusion splicers from a standard 12V car cigarette lighter socket. It supports 9V–14V DC vehicle input and is compatible with select View and IFS series splicers and LBT battery packs.

The Fluke i310s AC/DC current clamp is a Hall Effect-based probe designed for non-intrusive current measurement with oscilloscopes and multimeters. It supports AC and DC current measurement up to 450 A peak, with a frequency range from DC to 20 kHz and dual selectable ranges for measurement flexibility.

CTC ACC199-130 industrial accelerometer with 100 mV/g output for vibration monitoring. Compact 3-pin sensor design for reliable machine condition analysis.

AEMC MiniFlex® MA193-14-BK — Flexible Current Sensor, Measures up to 3000AAC, Compatible with AEMC Models 3945-B, 8220, 8230, and PEL Series, Includes a 2.75” clamp

AEMC 2135.71 AC Current Probe delivers MN82 current measurement for AEMC 6471/6472 ground resistance testing, including selective and stakeless ground electrode workflows.

INNO Instrument SCTX60 current sensor with 0-60A DC range, 60Apeak AC range, DB9 connection, 28 mm aperture, and DC-800 kHz measuring bandwidth for precision current measurement applications.

The Phoenix Contact RAD-OUT-4A-I is a compact analog extension module providing four independent 4–20 mA current outputs. Designed for DIN rail mounting, it operates from a 9–30 V DC supply via a bus foot connector and supports screw terminal wiring. The module is UL listed for Class I, Division 2 hazardous locations and CE compliant.

Fluke Networks FiberLert-125 6P live fiber detector enables fast non-contact verification of active fiber signals, polarity, and connectivity across 850–1625 nm.

Phoenix Contact MVSTBU 2,5-5,08 delivers a reliable 2-position 5.08mm pluggable terminal block for COMBICON MSTB 2.5 headers, ideal for secure 12A wiring connections.

AEMC MN251T AC Current Probe: 200A range, 1mV/A output, 10ft BNC lead—ideal for DMMs and voltage-input instruments needing accurate current readings.

Anritsu S251C Site Master: Precision cable & antenna analyzer (625-2500 MHz). Lightweight, handheld, ideal for site maintenance & troubleshooting!

Elevate your fiber testing capabilities with the **Viavi E136FB-VFL-AFL SmartOTDR**. This compact, handheld tester supports tri-wavelength analysis at 1310nm, 1550nm, and filtered 1650nm, making it an essential tool for field technicians. Equipped with a Visual Fault Locator (VFL) and APC connector, this device ensures quick identification of faults and secure connections, streamlining FTTH and FTTx network diagnostics. Lightweight and user-friendly, it delivers accurate results with automated analysis. Perfect for telecommunications and data center applications, the Viavi E136FB is your go-to solution for efficient fiber optic testing.

The INNO Instrument VIEW600 OTDR is a modular fiber Optical Time Domain Reflectometer configured with a three-wavelength OTDR module supporting 1310 nm, 1550 nm, and a 1625 nm live testing port. This provides dynamic range performance of 39 dB, 38 dB, and 39 dB for characterization of metro, access, and FTTx fiber networks.

Eaton BH-0122 offers reliable 100A, 700V fuse mounting for high-speed semiconductor protection in VFD, UPS, and solid-state control systems.

Pre-Owned INNO View 5 Pro splicer kit with V10 Pro cleaver. 5" touch screen, 520x zoom, 7 s splice, 13–15 s heat, all-day battery, and SOC connector-ready design. Includes FH-45 holder and power accessories.

Used Sonatest MB4TLF, 4 MHz twin crystal compression probe for flaw detection in castings and thickness surveys. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70. Order from Cartoli or call 1-833-322-7865.

AEMC SR661 AC Current Probe: Selectable 10, 100, 1000A ranges, BNC output, wide frequency response, ideal for oscilloscopes and power measurements.