Search results for: 'goods model'

Fluke 572-2 Infrared and Contact Thermometer measures from -30°C to 900°C (-22°F to 1652°F) with a 60:1 distance-to-spot ratio and dual laser sighting. Features adjustable emissivity, MAX/MIN/DIF/AVG display modes, and multi-language interface. Includes K-type bead probe, hard case, and USB cable.

Fluke SOL-TRNG-SPEC PVA Specialist Training is a live virtual class covering I-V curve tracing, Solmetric PV Analyzer operation, data management, deviation analysis, reporting, and acceptance testing for PVA-1500 Series users.

The Fluke CV400 is a 4 in (95 mm) infrared window with hand turn door latch for electrical panel inspection. It features a ClirVu coating system, AutoGround functionality, IP67 rating, and a 63 kA arc-blast rating tested at KEMA. Designed for quick installation without removing the panel door.

The REXA Koso S96111 Pulse Mod I/O Interface PCB Board is an internal electronic module used in REXA Electraulic™ actuators. It supports pulse modulation control and manages input and output signals within the actuator’s control system for precise positioning and communication.

The Schrack ZG400615 is a used ice cube relay rated for 5 Amps and up to 600 Volts. It features a 14-pin plug-in design and a 115 VAC coil voltage, making it suitable for general industrial control and electrical switching applications where reliable electromechanical control is required.

Fluke VPS410-II-R industrial voltage probe set delivers 500MHz bandwidth and 10:1 attenuation for accurate high-voltage signal measurement with compatible Fluke 190-II Series oscilloscopes.

Fluke 3PHVL-17XX-5M is a 3-phase + neutral voltage test lead cable assembly designed for structured multi-phase measurements, delivering organized lead management and reliable electrical connectivity over a 5 m length.

The Mitsubishi A1SG60 is a blank slot cover dummy module for MELSEC-A series PLC base units. It fills unused slots to protect internal components, reduce exposure to dust or foreign objects, and help maintain system stability when vacant slots are present.

ABB Steel City 72171 is a 4-11/16 in square steel electrical box with a 2-1/8 in depth and 42 cu in capacity. Constructed from pre-galvanized steel, it features eccentric knockouts for 1/2 in and 3/4 in conduit and is designed for commercial conduit wiring installations.

Amprobe DL248D Deluxe Test Lead Kit delivers silicone 48-inch leads with interchangeable probes, clips, and lugs for reliable electrical testing and diagnostic flexibility across compatible measurement instruments.

Fluke TP81 insulation piercing probes provide controlled wire access through insulation using stainless steel needles and 4 mm banana jack compatibility for accurate automotive and electrical diagnostics.

Amprobe DL243D Basic Test Lead Kit delivers flexible silicone leads, probe tips, alligator clips, and spade lugs for reliable electrical testing with compatible test instruments.

Fluke TP80 electronic test probes provide insulated IC-safe probing for dense circuit boards. Designed for use with Fluke TL222 and TL224 leads, offering controlled access to compact electronic test points.

The Honeywell 620-0088 Parallel Link Driver Module is a communication module for the Honeywell IPC 620 PLC system. It supports parallel data transfer between compatible IPC 620 processors and connected system components and is used within industrial control, communication, and monitoring architectures.

Honeywell 511-96019-101 Process Network Interface Module enables reliable communication within Honeywell TDC 3000 and Experion PKS distributed control systems, supporting Process Manager I/O network integration.

Fluke Networks 10220101 is a 6-wire in-line modular adapter with K-Plug, designed for safe circuit access and line testing on active telephone networks without interrupting service.

The Fluke AC285 SureGrip™ Alligator Clips include one red and one black large alligator clip with nickel-plated steel jaws. Designed with rubber overmolded SureGrip surfaces, they provide a stable, comfortable grip for electrical testing. Rated CAT IV 600 V, CAT III 1000 V, 10 A.

The Fluke TP88 Rigid Back Probe Pin Set includes two fine-tip, rigid back probe pins designed for use with 2 mm test probes. The red and black insulated pins slide onto compatible probes and allow access between weather pack seals and wires. Tested to 60 V DC.

The AMLOC 1204416-19 is a capacitance sensor assembly housed in a sealed enclosure with a rear-mounted multi-pin connector. This unit consists of the sensor electronics only and does not include a probe or external accessories. Identification and configuration are based on visible labeling and construction.

The IDEC APW299D-W-120V is a panel-mount white pilot light indicator designed for industrial control applications. This unit operates on 120V AC and features a dome-style white lens with a metallic bezel. It is UL listed and CSA marked, with screw terminal connections housed in a compact rectangular base.

The GE IC2956A206A is an industrial interlock snap-action contact block used as a control component within safety and machine control systems. This unit is a standalone mechanical contact block featuring a snap-action mechanism for consistent contact switching. No additional accessories or hardware are included.

The Yamatake Honeywell J-MSC10 is an industrial system module used in DCS and automation control environments. Designed for reliable operation, it supports industrial control architectures and is suitable for integration into advanced multifunction controller systems.

The Corcom NF21091-3 is a chassis-mount EMI line filter rated for 16 A at 250 VAC, 50/60 Hz. This metal-enclosed filter features clearly labeled LINE and LOAD terminals and is designed for installation in AC power input paths where conducted electrical noise reduction is required.

Pomona 6041B extra large alligator clip set delivers secure high-voltage test connections with integrated 4mm safety jacks, designed for IEC-compliant electrical measurement applications.

Pomona 5697-60 antenna cable delivers reliable 50 ohm BNC connectivity with gold-plated contacts and high-quality construction in a non-booted design.