Search results for: 'box chi'

GAI-Tronics 12514-008 is a 15 ft PVC coil cord kit for industrial handset stations. It is used as a replacement cord assembly for extended handset reach.

The Dwyer 1638-2 is a large diaphragm pressure switch designed for low-pressure applications with an operating range of 1 to 3 inches water column (WC). This configuration supports pressure-actuated switching within defined low differential ranges.

The Telemotive E7207-1 Circuit Board is an industrial automation component used in Telemotive radio control systems. Identified by part number E7207-1, this board is commonly applied in industrial control environments including crane and hoist remote control systems.

Hubbell HC69476733 industrial resistor assembly delivers controlled resistive load handling for power dissipation and current regulation in industrial electrical systems.

The General Electric 8G163WF is a fluorescent lamp ballast labeled for 277-volt operation and F48CW lamp applications. This unit is identified directly from manufacturer carton labeling and is supplied as a single ballast. No additional accessories or documentation are included.

GAI-Tronics 13204-002 receiver cap set of 4 for industrial handsets used in Page/Party® and 700 Series communication systems. Designed as a replacement component for the receiver end of handset assemblies.

Littelfuse JTD-030ID fuses deliver 30A Class J circuit protection with indicating status visibility, 600 VAC or less rating, and time-delay performance for compatible electrical systems.

The Balluff BFO-48G-DSV-SC-1 is a glass fiber optic cable designed for use with a separate fiber optic base unit. It supports diffuse reflection sensing in side-view configurations and is suited for industrial detection tasks in harsh environments.

GAI-Tronics 12511-001 is a dynamic noise-canceling transmitter replacement kit for compatible handsets in industrial paging systems. The kit includes the transmitter element and replacement cap and is identified as a replacement for legacy part 12511-007.

New GE Kelman Transport X² portable dissolved-gas-analysis system for transformer oil. Configure your quote by selecting regional power cable, color, and optional accessories. 

Killark 380S stamped steel conduit body cover designed for 1-inch trade size conduit bodies. Constructed from stamped steel with stainless steel screws, this UL and CSA approved blank cover is used to close and protect conduit body openings in electrical installations.

Fluke Networks QC-LC-DUPLEX-1P QuickClean tool cleans LC duplex connectors, delivering fast, reliable endface cleaning in a convenient single-pack format.

Bussmann LPJ-15SP time-delay fuse delivers 15A circuit protection with dual-element response and current-limiting performance for industrial electrical systems up to 600VAC.

Olympus AM4R-20X22-70 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 70° angle in steel and right angle LEMO 1 connector—designed for high-resolution weld inspection and flaw detection.

GAI-Tronics 411A speaker mounting bracket assembly for wall mounting and positioning compatible speaker hardware, with bracket, adapter, conduit pipe, elbow, and gasket.

Gould Shawmut A70P100-4 semiconductor fuse delivers 100A protection with 700VAC and 650VDC ratings, designed for high-speed circuit protection in power electronics and semiconductor applications.

Allen-Bradley 1336-RLOAD-SP1A load resistor for Bulletin 1336 AC drives, designed to manage internal load, DC bus discharge, and power stabilization in 25–30 HP, 460V drive systems.

3-3/4 autorange digital multimeter 23pcs 1/4" driver socket set Heavy duty curved-claw hammer W/Fiberglass handle Adjustable wrench 8" IC extractor Hobby vise Slip-channel pump pliers 254mm ProSoft precision screwdriver 2.0x50mm (2") ProSoft precision screwdriver 2.4x75mm (3") ProSoft precision screwdriver 3.0x100mm (4") ProSoft precision screwdriver #00x50mm (2") ProSoft precision screwdriver #0x75mm (3") ProSoft precision screwdriver #1x150mm (6") Utility component storage box Pro-soft screwdriver 5.0 x75mm Pro-soft screwdriver #1 x75mm Pro-soft screwdriver 5.0 x100mm Pro-soft screwdriver #1 x100mm Pro-soft screwdriver 6.0 x100mm Pro-soft screwdriver #2 x100mm Pro-soft screwdriver #2 x250mm Pro-soft screwdriver 6.0 x40mm Pro-soft screwdriver #2 x40mm Fine tip straight tweezer Long nose plier 135mm Diagonal cutting plier 110mm Dual Color Lineman's plier Dual Color cutting plier Dual Color Long nose plier 9pcs ball point long arm hex key set 10pcs electronic combination wrench 5pcs needle file set Ceremic soldering iron 110V Desoldering wick Solder core 63%, SN PVC insulated tape Utility knife (3 blades self loading) Measuring tape 3M/10FT All purpose snip Desoldering pump Flux bottle (2pcs/pack) Blow brush ( ∅62mm) Telescopic magnetic pick up tool Inspection mirror Pallet for PK-15308 Heavy-duty ABS cases with wheels and telescoping handle

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

Fluke Networks LinkIQ LIQ-KIT-FTK1475 Cable+Network Tester with Fiber Test Kit – Combines copper cable testing up to 10G with fiber inspection, power measurement, and loss verification. Complete solution for mixed copper/fiber environments.