Search results for: 'box with model'

Hubbell HC69476733 industrial resistor assembly delivers controlled resistive load handling for power dissipation and current regulation in industrial electrical systems.

GAI-Tronics 13204-002 receiver cap set of 4 for industrial handsets used in Page/Party® and 700 Series communication systems. Designed as a replacement component for the receiver end of handset assemblies.

The General Electric 8G163WF is a fluorescent lamp ballast labeled for 277-volt operation and F48CW lamp applications. This unit is identified directly from manufacturer carton labeling and is supplied as a single ballast. No additional accessories or documentation are included.

Eaton Cutler-Hammer PC-GF20 switch protector guard helps shield 30.5 mm pushbutton and emergency-stop operators with reinforced PC-GF20 construction and metal washer support.

System Sensor P4RK horn strobe delivers audible and visual fire notification in a red wall-mount four-wire configuration with FIRE lettering for clearly marked alarm signaling.

Littelfuse JTD-030ID fuses deliver 30A Class J circuit protection with indicating status visibility, 600 VAC or less rating, and time-delay performance for compatible electrical systems.

The IDEC APW299D-W-120V is a panel-mount white pilot light indicator designed for industrial control applications. This unit operates on 120V AC and features a dome-style white lens with a metallic bezel. It is UL listed and CSA marked, with screw terminal connections housed in a compact rectangular base.

Valco Melton 765XX125 Valve Module Assembly delivers controlled fluid actuation for industrial adhesive and dispensing systems, supporting precise flow regulation within automated production environments.

GE Power 730157 DILOS 2-160 delivers 4-pole manual switch disconnection with 160A Ith and 690V Ui markings for electrical control and isolation setups.

The GE IC2956A206A is an industrial interlock snap-action contact block used as a control component within safety and machine control systems. This unit is a standalone mechanical contact block featuring a snap-action mechanism for consistent contact switching. No additional accessories or hardware are included.

3-3/4 autorange digital multimeter 23pcs 1/4" driver socket set Heavy duty curved-claw hammer W/Fiberglass handle Adjustable wrench 8" IC extractor Hobby vise Slip-channel pump pliers 254mm ProSoft precision screwdriver 2.0x50mm (2") ProSoft precision screwdriver 2.4x75mm (3") ProSoft precision screwdriver 3.0x100mm (4") ProSoft precision screwdriver #00x50mm (2") ProSoft precision screwdriver #0x75mm (3") ProSoft precision screwdriver #1x150mm (6") Utility component storage box Pro-soft screwdriver 5.0 x75mm Pro-soft screwdriver #1 x75mm Pro-soft screwdriver 5.0 x100mm Pro-soft screwdriver #1 x100mm Pro-soft screwdriver 6.0 x100mm Pro-soft screwdriver #2 x100mm Pro-soft screwdriver #2 x250mm Pro-soft screwdriver 6.0 x40mm Pro-soft screwdriver #2 x40mm Fine tip straight tweezer Long nose plier 135mm Diagonal cutting plier 110mm Dual Color Lineman's plier Dual Color cutting plier Dual Color Long nose plier 9pcs ball point long arm hex key set 10pcs electronic combination wrench 5pcs needle file set Ceremic soldering iron 110V Desoldering wick Solder core 63%, SN PVC insulated tape Utility knife (3 blades self loading) Measuring tape 3M/10FT All purpose snip Desoldering pump Flux bottle (2pcs/pack) Blow brush ( ∅62mm) Telescopic magnetic pick up tool Inspection mirror Pallet for PK-15308 Heavy-duty ABS cases with wheels and telescoping handle

Omega CN9111A temperature controller delivers precise thermal regulation with dual relay outputs and 115V operation, supporting controlled heating and cooling processes across industrial environments.

Siemens 771-8STF1 current-to-pneumatic (I/P) transducer converts a DC mA input to a proportional pneumatic output. Configuration: 4–20 mA input, 3–27 psig output, standard output capacity, terminal strip, intrinsically safe approval.

Burks 9990238 mechanical seal delivers reliable shaft sealing for Grundfos GRF-B pumps, ideal for water, oil, and sewage systems needing high-quality replacements.

Olympus AM4R-20X22-70 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 70° angle in steel and right angle LEMO 1 connector—designed for high-resolution weld inspection and flaw detection.

Bussmann LPJ-15SP time-delay fuse delivers 15A circuit protection with dual-element response and current-limiting performance for industrial electrical systems up to 600VAC.

ABB NKTU11-14 INFI 90 Termination Loop Cable supports INFI 90 system cable connections with a loop cable format and printed 300V, 90°C, #22 AWG construction details.

GAI-Tronics 411A speaker mounting bracket assembly for wall mounting and positioning compatible speaker hardware, with bracket, adapter, conduit pipe, elbow, and gasket.

Eaton Cutler-Hammer SL7-BL120-R delivers high-visibility red LED signaling in a 70 mm stacklight format, operating on 120VAC for industrial status indication and machine signaling applications.

Honeywell 513-04476-175 analog output termination board delivers eight 4–20 mA outputs for precise field device control in Honeywell UCN and TDC 3000 systems with conformal-coated reliability.

The GE DS3800XTFP is a thyristor fan-out adapter board for Speedtronic Mark IV turbine control systems. It distributes logic-level signals through eight red jack connectors and a 6-pin terminal, supporting structured signal routing within MKIV control racks.

Fluke Networks LinkIQ LIQ-KIT-FTK1475 Cable+Network Tester with Fiber Test Kit – Combines copper cable testing up to 10G with fiber inspection, power measurement, and loss verification. Complete solution for mixed copper/fiber environments.

Fluke 393 CAT III 1500V clamp meter delivers true RMS AC/DC measurements up to 2500A with iFlex probe and IP54 protection for harsh environments.

Fluke Networks 44507003 Can Wrench combines dual hex sockets and a built-in 22-gauge wire stripper for fast, safe access to telecom enclosures.