Search results for: 'caused out'

Multimode launch cable 50μm SC/SC. Fluke Networks MMC-50-SCSC Launch Cable is a multimode SC/SC fiber optic cable which is used for high-speed networks installation, inspection and troubleshooting. The multimode fiber has a 50/125µm core/cladding diameter. Length is 105 meters.

The V-2410 Three-Way Multipurpose Solenoid Air Valve is used in applications where an electrical circuit operates a pneumatic control device. This valve diverts the air signal to the pneumatic device when the coil is energized or de-energized, depending on the choice of air connection.

The 42N50A-30 coaxial fixed attenuator provides 30 dB attenuation and a 50 watt power rating for high power measurements.Fixed attenuator30 dB attenuation50 watt power rating

The TPP0250 is a Passive Voltage Probe designed for use with Tektronix MDO3000, MDO4000B, MSO/DPO4000B and MSO/DPO5000B-series oscilloscopes, these probes provide up to 1GHz of analog bandwidth with less than 3.9pF of capacitive loading. Integrated oscilloscope and probe measurement system provides intelligent communication that automatically scales and adjusts units on the oscilloscope display to match the probe attenuation.

Greystone - Sensor Type 12 - Pt1000-1000 ohm Platinum RTD. Immersion 100mm (4") c/w ABS utility box -requires thermowell Probe Sensors. The TE200 Series temperature sensors offer a choice of precision platinum RTD's, IC's, or NTC thermistor sensors which can be interfaced with a computerized monitoring or control system.

Fujikura FSM-50S SM MM Fiber Core Alignment Fusion Splicer w/ Cleaver CT-30 50 S

Fluke Networks DSX-602-PRO: Unleash the Power of Precision Copper Cable Certification

Looking for a reliable solution to protect your CCT and CKT scales from damage caused by liquids and other wet materials? Look no further than Adam Equipment's In-Use Wet Cover. Designed specifically for CCT and CKT scales, this cover provides a protective barrier against moisture, helping to prevent damage and maintain the accuracy of your weighing results. Made from durable materials, this wet cover is built to withstand frequent use in wet or humid environments. Choose Adam Equipment's In-Use Wet Cover for a dependable and effective solution to protect your CCT and CKT scales.

Protect the CB from dust and spills with this disposable in-use cover. Keeping your balance clean increases its longevity and reduces the need for costly maintenance. The cover is see-through, which allows the user to operate the balance with no limitations.

Looking for a solution to protect your Adam Equipment scale from dust and other materials while still being able to use it? The Adam Equipment 301207077 In-use Wet Cover is the perfect solution. This wet cover is designed to protect your scale from dust, dirt, and other materials that can accumulate and cause damage, while still allowing you to use the scale with the cover on. Made from high-quality materials, the wet cover is also water-resistant, making it ideal for use in environments where spills and splashes are common. With the Adam Equipment In-use Wet Cover, you can protect your scale and keep it functioning at its best.

Looking for a way to protect your weighing equipment from dust and other materials that can affect its performance and accuracy? Consider the Adam Equipment Dust Cover. This protective cover is designed to fit snugly over your weighing equipment, shielding it from dust, dirt, and other contaminants that can accumulate and cause damage. Made from durable materials, the Adam Equipment Dust Cover is easy to clean and maintain, ensuring that your equipment remains in top condition and performs at its best. Keep your weighing equipment safe and protected with the Adam Equipment Dust Cover.

The Fujikura 12S incorporates features typically found only in more expensive models. The large 4.5" monitor provides a crystal clear image, even in the brightest sunlight, for evaluating splice quality. The electrode life has been extended to 3,000 splices, minimizing downtime for replacement and stabilization. Software updates are accomplished via the internet allowing users to quickly update their software as new splice programs become available. The fully ruggedized chassis provides for shock, dust and moisture protection while the two camera observation system provides for accurate fiber alignment and loss estimation calculations. The Fujikura 12S is also fully compatible with the FuseConnect line of fusion installable connectors.

The Flir E75-14 Thermal Imaging Camera with High-Resolution and Self-Calibrating Interchangeable 14 Degree Lenses is the newest cutting-edge thermal imaging technology from Flir, providing high sensitivity and resolution in an intuitive handheld design with high-performance features and wireless communication. Powered by a high-performance CPU, this camera delivers 320 x 240 thermal resolution that’s crystal clear, yet affordable while offering powerful functionality at no cost to you.

The Ti200 infrared camera delivers the flexibility and performance to allow you to stay on top of innovation, whether it's through industrial or commercial applications. You'll be able to spectrum analyze, detect heat and radiation level variations, or use it for industrial process control — all with wireless speed and ease. And, since it's future-ready, no matter what comes next for your business, so long as you have an infrared camera on hand, you'll be ready.

This set of Permanent Link Adapters from Fluke Networks comes with two tips, two latches, two screws, two top and bottom cases, and two conductive washers. The adapters meet all measurement accuracy specifications for Level IV test equipment, with a typical contact life of over 5,000 cycles. Each adapter measures 3.0 inches by 2.1 inches by 1.2 inches, has a 4.85-foot cable, and weighs approximately 2.4 ounces (channel adapter) or 11.7 ounces (permanent link adapter).

The DSX-PLA004/CHA004 permanent link and channel adapters meet all measurement accuracy specifications for Level IV test equipment. The life of module contacts is >5,000 cycles. Dimensions are 3.0 in x 2.1 in x 1.2 in (75 mm x 54 mm x 30 mm). The permanent link adapter has a 4.85 ft (1.48 m) ±0.25 ft (0.1 m) cable. Weight is ~2.4 oz (68 g) for the channel adapter and ~11.7 oz (332 g) for the permanent link adapter.

This set of Permanent Link Adapters from Fluke Networks comes with two tips, two latches, two screws, two top and bottom cases, and two conductive washers. The adapters meet all measurement accuracy specifications for Level IV test equipment, with a typical contact life of over 5,000 cycles. Each adapter measures 3.0 inches by 2.1 inches by 1.2 inches, has a 4.85-foot cable, and weighs approximately 2.4 ounces (channel adapter) or 11.7 ounces (permanent link adapter).

The DTX-MFM2 fiber module are used with a DTX Series Cable Analyzer to test and certify fiber optic cabling installations. 

Volarious V-Line Pro Tether Kit Power Cable, M30 Series Power Module Volarious V-Line Pro Tether Kit Power Cable, M30 Series Power Module