Search results for: 'connects'

The Inno Instrument HDMI to USB Cable is a communication interface designed for Inno Instrument VIEW series fusion splicers, including VIEW 3, VIEW 5, VIEW 7, and VIEW 12R models. It connects the splicer’s Micro HDMI port to a standard USB Type-A port on a computer for data transfer, software updates, and graphical interface mirroring.

AEMC 2140.44 test lead provides a 10 ft (3 m) black measurement connection with an integrated black alligator clip for use with compatible AEMC PowerPad and PEL series electrical testing systems.

The EMI Corp Gimatic 6753 SB2C Sensor Junction Box enables connection of up to two sensors with series or parallel wiring, PNP/NPN signal conversion, dry contact I/O, signal regeneration, and LED status indication for efficient automation integration.

The INNO Instrument DIN-18 is a DC power cable designed to connect compatible INNO TS-Pro or TS-Plus thermal strippers to the power output port of supported INNO View series fusion splicers. It enables field operation by allowing the thermal stripper to draw power directly from the splicer’s internal battery.

Wohler A400/A500/E335 Quick Charger for Angled Jack delivers dependable charging support for compatible Wohler equipment, helping maintain readiness with a compact, purpose-built power solution.

Fluke Networks 26200900 Pro3000 Tone Generator uses SmartTone technology to accurately trace and identify copper cable pairs up to 10 miles.

Fluke i17XX-FLEX6000 flexible 36-inch current clamp measures up to 6000A AC and connects directly to Fluke 17XX loggers for accurate, scalable-free current readings.

Fluke I17XX-FLEX1500/3PK flexible current probes deliver up to 1500A AC measurement with 12-inch loops and direct connection to 173X energy and power loggers.

Eagle Eye HGD-2000-C3 Control Box with 3 Sensors Compatible with HGD-2000 for monitoring hydrogen gas buildup in battery rooms and similar facilities. Features dual relays, audible alarm, and AC power input.

The ABB OHDI-01 is a 115/230 VAC digital input module designed for use with ABB ACS550, ACH550, and ACS800 drives. It converts high-voltage digital input signals to 24 VDC drive inputs and supports up to six 115 VAC inputs or three 230 VAC inputs.

The GE Fanuc IC693CHS392G is a 10-slot expansion I/O baseplate for the Series 90-30 PLC platform. It features a 25-pin D-type expansion connector, rack address DIP switch, and supports local I/O expansion up to 50 feet. Designed for use with compatible CPU baseplates.

Fluke I410 AC/DC current clamp adapter expands digital multimeters to measure 1A–400A AC/DC using Hall-effect sensing with 1mV/A output, enabling safe, non-intrusive current measurements.

The Fluke Networks FI2-7300 is a USB-C FiberInspector Ultra probe that delivers high-resolution end-face imaging and automated IEC pass/fail analysis when used with Versiv. It supports quick inspection of single-fiber connectors in enterprise and data-center fiber systems.

Siemens 75D70550004 magnetic coil supports D.P. Model F contactor replacement with dual-voltage operation at 380–440V 50 Hz and 440–480V 60 Hz.

The Fluke i1010 is an AC/DC current clamp designed for use with digital multimeters. It measures currents from 1 A up to 1000 A DC and up to 600 A AC using a Hall-effect sensor. The clamp outputs 1 mV per amp for direct reading on compatible meters.

Fluke TI-CAR CHARGER car charger allows convenient 12 V DC charging of compatible Fluke thermal imagers directly from a vehicle power outlet.

The Allen-Bradley 2198-K57CK-D15M is a universal feedback connector kit for Kinetix 5700 drives. It provides wire terminations for encoder signals when using Allen-Bradley 2090-Series motor feedback cables and connects to the drive’s universal feedback (UFB) port.

Wöhler 1287 Snap & Sweep Blue Cleaning Rod delivers fast chimney cleaning with flexible soft bristles, click-lock coupling, and drill-driven rotation for efficient soot removal in professional sweeping workflows.

GAI-Tronics 13314-002 is a 16-ohm indoor/outdoor compression driver for compatible horn assemblies. It is rated for Div. 2 hazardous areas, features 1.375-18 UNEF horn threads, and carries a NEMA 4X enclosure rating.

AutomationDirect D2-08NA-1 is an 8-point AC input module for DL205 PLC systems with 80-132 VAC input range, 47-63 Hz operation, removable terminal connection, and logic-side status indication.

Wöhler 5529 Perlon Threaded Brush Kit brings four M10 brush sizes—8", 10", 12", and 14"—into one flexible cleaning set for matching different flue, chimney, and ventilation line diameters with fast, practical setup.