Search results for: 'goddess rating'

Emerson KJ3204X1-BK1 is a DeltaV digital output module with 32 high-side 24 VDC channels for distributed control and automation I/O applications.

The PROFLO PFRCKU is a 6-inch, two-bolt pipe repair clamp designed for use on 2-inch pipe. It features a 430 stainless steel band, NBR gasket, and plated hardware, supporting a 150 psi pressure rating and a working temperature range from -30°F to 180°F.

The Fluke TL75 Hard Point Test Lead Set combines test lead and probe into a single unit for general-purpose electrical measurements. This set includes one red and one black PVC-insulated lead, each 48 inches long, with right-angle shrouded banana plugs and removable protective caps.

Allen-Bradley 1489-M D25A miniature circuit breaker delivers 3-pole, 25A D-curve thermal-magnetic protection for industrial branch circuits with high inrush current demands.

Mersen / Ferraz Shawmut A155F2D0R0-125E is a 15.5 kV, 125E medium-voltage, E-rated Amp-Trap® CS-3 series ferrule-mounted fuse. Designed for transformer and distribution protection, it provides current-limiting performance with visual blown-fuse indication and compatibility with standard spring-reinforced clips.

Allen-Bradley 700-HN126 Relay Socket supports relay base connection with screw terminals, 10A 300V rating, and visible UL Recognized, CE, and CSA markings.

INNO Instrument PAC-1006 large alligator clip adapter set with red and black insulated clips, safety connector interface, and 600V CAT IV 19A rating.

The Fluke CV301 is a 3 in (75 mm) ClirVu® infrared inspection window with a security key door latch. Designed for permanent installation on electrical enclosures, it enables infrared inspections without opening panel doors while maintaining enclosure ratings and safety compliance.

Fluke TL80A test lead set delivers flexible silicone leads, fine electronic probes, and banana plug compatibility for accurate low-energy electronic measurements with Fluke and compatible multimeters.

Fluke TL224 SureGrip insulated test leads include one red and one black lead with safety-shrouded standard diameter banana plugs. The leads feature a right-angle connector on one end and a straight connector on the other, reinforced strain relief, and silicone-insulated wire designed to resist heat and cold.

AEMC 2154.76 Fuse Set of 3, 0.63A, 1000V fast blow fuses designed for Models 5212, 5215, and 5217, ensuring reliable circuit protection.

The NOARK Ex9S32A32A is a 3-pole thermal-magnetic manual motor starter with an adjustable 24–32A current setting range and Class 10 overload protection. Designed for motor branch circuit protection, it provides manual isolation, manual motor control, and short-circuit protection with rotary handle operation.

The Fluke 87V MAX Digital Multimeter Solar PV Lead Kit combines the IP67-rated 87V MAX True-RMS multimeter with Pomona PVLEAD1 MC4 solar PV connector test leads. Designed for electrical troubleshooting in harsh environments, it supports AC/DC voltage up to 1000 V, 10 A current, resistance, capacitance, frequency, and temperature measurements. The included MC4 to 4 mm leads enable direct voltage verification on photovoltaic arrays while maintaining IEC / EN 61010-031 compliance.

The Siemens B220 2-Pole breaker delivers reliable 20A thermal-magnetic protection for 120/240V systems, ideal for Siemens P1 panelboards and BL-series load centers.

The MAC Valves PME-501CC is a solenoid pilot valve labeled 24 VDC and 6.0 watts. The valve body marking indicates a pressure range of 20–150 PSI. The unit includes an attached hardwired cable with flying leads.

Fluke TL1500DC test leads provide safe, accurate voltage measurements up to 1500 V DC, ideal for multimeters, clamp meters, and solar/battery testing.

Fluke FUSE-440MA/1000VB5 is a 440mA 1000V fast-acting replacement fuse pack engineered for Fluke digital multimeters, maintaining proper internal circuit protection and measurement safety.

AEMC replacement set of 2 needle tip test leads, color-coded red/black with 4mm right-angle plugs. Rated 600V CAT IV shielded, fits meters 5212-5217.

OMRON PTF11PC 11-pin relay socket lot with 10A rating and screw-terminal wiring layout, ready for relay socket replacement, panel support, or control component stocking.

AEMC 2971.04 Fast Blow Fuse Set: Reliable 200mA, 1000V fuse for Models 6528 and 6529, ensuring effective overload protection and durability.

IDEAL 89-212 terminal strip provides reliable 12-pole wire termination with 30A/600V performance, durable construction, and universal compatibility for industrial wiring.

Fluke TLK290 probe set: Flexible sockets and alligator clip for safe, precise testing of motors, 3-phase plugs, and 4–8 mm connections.

Fluke TL71 test lead set with silicone-insulated, right-angle probes for precise µV measurements. CAT IV 600V, CAT III 1000V rated for safe, reliable testing.