Search results for: 'iso11137-2'

Mitsubishi AL2-EEPROM-2 Memory Cassette delivers reliable EEPROM program storage for Alpha2 PLCs, enabling secure backups, transfers, and long-term data retention.

The Tristar S0803-0000 is a compact 12V DC white LED indicator designed for 1/2" hole mounting. This polarity-sensitive LED draws approximately 0.02–0.03 amps and consumes about 0.25 watts. The unit features a 1/2" diameter body with a 1.75" housing length and is suitable for low-draw DC indicator applications.

The Keyence SL-U2 is a switching-type power supply unit designed for industrial safety applications. It provides a regulated 24 VDC output at up to 1.8 A from a universal 100–240 VAC input and is intended for use with Keyence safety light curtain systems.

The Allen-Bradley 800T-XA2 Series D is a 30 mm industrial control contact block featuring two normally open contacts and an A600 NEMA pilot duty rating. Designed for use with Bulletin 800T operators, it provides screw-terminal connections and base-mount installation for industrial control panels.

3 1/2 digits 1999 counts Dual slope A/D conversion Large backlit LCD display

The Moore Industries DCA/4-20MA/SH2/117AC-DPDT-GP is a DC current alarm trip module designed to monitor a 4–20 mA process signal and actuate relay contacts when a high alarm setpoint is exceeded. It operates on 117 VAC power and provides DPDT relay outputs for alarm signaling.

ASEA RXIL 2 plug-in protection relay, model RK 412 112-AC, from the COMBIFLEX system. This module features a front rotary adjustment dial and plug-in rear pin interface, designed for installation in compatible COMBIFLEX relay systems.

The Universal 447-LR-TC-P is a 120V magnetic fluorescent ballast designed to operate two lamps in trigger-start configurations. It supports F20T12, F15T8, and F15T12 lamps and features a low power factor, lag-type circuit. UL and CSA certifications support indoor and Type 1 outdoor use.

Fluke Networks S2 GUIDE SN FEMALE enables accurate inspection of recessed female SN connectors using FI-3000 or FI-1000 inspection cameras.

Pomona 6733-2 is a 50 ft red silicone insulated test lead wire designed for fabricating custom test leads, jumpers, or patch cords. It uses 18 AWG bare copper conductors with a high strand count for flexibility and is the same wire used in Pomona test leads and patch cords.

The Sauermann CO2 Ambient Probe, offering a 0-5000 ppm range, serves as an essential instrument for safeguarding optimal indoor air quality by continuously tracking and controlling carbon dioxide concentrations. Its ability to provide live data and compatibility with various integration possibilities enhance its utility.

Power up your Fluke Networks Versiv with the 21CR19/66-2 Replacement Battery! Designed for optimal performance, this brand-new battery ensures your network testing tools are always ready for action.

Fluke Networks DSX-CHA804 Channel Adapter enables CAT 8 channel testing and certification with DSX2-8000 CableAnalyzer systems.

Olympus AM2R-20X22-60 is a 2 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 60° angle in steel and right angle LEMO 1 connector—ideal for weld inspection and flaw detection.

The inclusion of the Sauermann H2S Sensor (0-500ppm) with the Si-CA 230 Upgrade board provides an all-in-one solution for thorough gas detection and environmental monitoring, giving users the capability to efficiently mitigate potential risks.

The Si-CA 230 upgraded board for the Sauermann NO2 Sensor (0-1000ppm) offers an advanced solution designed to monitor and control nitrogen dioxide gas concentrations. It provides precise measurements, effortless integration, and improved data analysis capabilities.

Wohler 3354 electrochemical oxygen sensor for A 400 and A 400 PRO flue gas analyzers. Field-replaceable design with 0.0 to 21.0 Vol.-% O2 measurement range.

The Allen-Bradley 800S-R2SX is a standard-duty, two-position selector switch designed for surface-mount industrial control applications. It features a maintained ON/OFF knob operation, screw terminal wiring, and a NEMA Type 1 enclosure for general-purpose environments.

The Sauermann Low NO2 Sensor (0-100ppm) equipped with a Si-CA 230 Upgrade board is an indispensable instrument for individuals in need of accurate and dependable monitoring of NO2 gas across a broad range of concentrations.

Adam Equipment ASTM 2 - 2g Weight: Precision-polished stainless steel for accurate calibration. Durable, ANSI/ASTM compliant, and packed in a protective case.