Search results for: 'left'

The INNO Instrument LBT-3000 is an 11.1V, 3000mAh lithium-ion battery pack designed for compatible INNO fusion splicers including the M7, M9, A3, IFS-15M, and IFS-15M+. It provides 33.3Wh capacity and features an integrated LED charge indicator for field power management.

The INNO Instrument LBT-52 is an 11.1V, 5200mAh (57.72Wh) rechargeable lithium-ion battery pack designed for INNO fusion splicers. It features an integrated LED battery level indicator for real-time capacity monitoring and supports approximately 3-hour charging.

The Inno Instrument USB-10P is a DC power cable featuring a USB Type-C connector on one end and a USB Type-A connector on the other. It is designed for powering and charging compatible Inno Instrument fiber optic equipment that utilizes a Type-C power input interface.

The INNO USB Type-C to USB Type-A (Female) Cable is an OTG adapter designed for INNO View-series fusion splicers equipped with a USB-C interface. It enables connection of standard USB-A peripherals such as flash drives, mice, or keyboards for data transfer and accessory operation.

The INNO Instrument RS-PLUS Ribbon Splitter Tool is a compact, all-metal de-ribbonizer designed to separate multi-fiber ribbon cables into sub-groups or individual fibers. It supports 4, 8, and 12-fiber ribbons and enables controlled fiber preparation prior to splicing in fiber optic networks.

The INNO Instrument UN1CO Shoulder Strap is an accessory component for the UN1CO mobile workstation system. Designed for integration with the UN1CO work tray, it supports hands-free transport and stabilization of fiber optic splicing equipment during field deployment. This listing includes the shoulder strap only.

The Inno Instrument UN1CO Pole Mount Bracket is an accessory designed to secure the UN1CO work tray to utility poles and similar vertical structures. It provides a stable mounting interface for field fiber splicing applications. The bracket assembly includes integrated straps and a safety retention loop. UN1CO tray not included.

The INNO Instrument UN1COLK UN1CO Ladder Mount Work Platform is an ABS workstation designed for secure positioning on ladder rungs during fiber splicing operations. It provides a stable surface for INNO View series fusion splicers and common industry cleavers in elevated or confined environments.

The INNO Instrument UN1COMP is a modular fiber splicing workstation kit designed for mobile and elevated field operations. The system includes the UN1CO Mobile tray, tripod stand, ladder and pole mounting brackets, and the UN1CO backpack.  The included mounting options allow use as a wearable workstation and tripod-mounted table.

The INNO B-80 is a 16-position replacement blade designed for INNO fiber cleavers including V7, V7+, V10, V11, V12, V17, VF-15, VF-15H, and VF-78 models. Rated for up to 48,000 cleaves, the B-80 replaces the B-77 blade and supports consistent fiber cleaving in installation and maintenance environments.

Siemens 4700-DC3-11HN digital power meter providing true-RMS voltage, current, power, energy, demand, waveform capture, programmable relays, and analog output for industrial power monitoring systems 

Olympus SA10-0L-IHC A10 phased array wedge with 0L longitudinal geometry, IHC housing, irrigation ports and carbide wear protection for A10-format phased array probes.

AEMC 6611 Phase & Motor Rotation Meter: Identify phase order, motor direction, and live/open phases on 3-phase systems. Ideal 6609 replacement.

The Rigaku KT-100 is a handheld LIBS analyzer designed for rapid alloy identification and elemental analysis of industrial metals. This configuration includes permanent, transferable calibration matrices covering stainless steels, low alloy steels, aluminum grades, titanium, cobalt, nickel, and copper.

Bulb Diameter: 5.5"

Olympus OmniScan X3 PA1664PR 16:64 phased array flaw detector with WiFi 5 adapter, IP65-rated enclosure, TFM-capable PAUT performance, and onboard scan plan tools for efficient weld and corrosion inspections.

INNO Instrument SCTH1000 is a pass-through current sensor for DC 0–1000A and AC 1000Apeak measurement, with DC–300 kHz bandwidth, ±(0.05% of rdg + 15 μA) accuracy, DB9 interface, and ±15V to ±24V supply.

Wöhler 4798 Power Supply provides charging and operating power for compatible Wöhler VIS 2xx and VIS 3xx inspection camera systems. The adapter accepts 100–240 V input and delivers regulated 18 V, 1.5 A output with a typical charging time of about 3 hours.

The INNO Instrument LI-ION 220 is a 7,800mAh rechargeable lithium-ion battery designed for the INNO Instrument View 500 Optical Time Domain Reflectometer (OTDR). It provides portable field power for fiber optic testing operations and supports extended operation of the View 500 platform during installation.

The INNO Instrument Li-ion 216 is a rechargeable lithium-ion battery pack designed for use with INNO Instrument Mini 2 series fiber optic test equipment, including the Mini 2 OTDR. The battery provides an output of 7.4V with a capacity of 4300mAh (31.82Wh) and installs directly into compatible INNO handheld instruments as a field-replaceable power source.

INNO Instrument OLL-500-652D-SC-UPC OTDR launch fiber reel provides a 500 m singlemode fiber link used with optical time domain reflectometers to stabilize launch conditions and support evaluation of fiber connections during installation, verification, and troubleshooting.

INNO Instrument FL-500-SC-APC is a 500 m singlemode OTDR launch fiber reel with SC/APC connectors designed to support fiber optic link testing. The launch fiber provides a buffer distance that allows Optical Time Domain Reflectometers to measure near-end connections and reflectance with improved visibility.

The INNO Instrument FL-500-SC-UPC is a 500-meter single-mode fiber optic OTDR launch cable designed for accurate fiber link testing. Built with 9/125 µm OS2 fiber and SC-UPC connectors on both ends, it creates the necessary launch distance to measure insertion loss and reflectance at the first connection point.

The INNO Instrument ACC-25-B AC Power Cable is a standard AC input cord designed to connect compatible INNO Instrument AC adapter blocks to a wall outlet. Featuring a 2-pin wall plug and C7 “Figure-8” connector, it supports 100–240V AC operation when used with approved adapters such as the JS-1618 and JS-180300 for View and M series fusion splicers.